Nur Hamidah Abdul Halim
Thumbnail Image
Preferred name
Nur Hamidah Abdul Halim
Official Name
Nur Hamidah, Abdul Halim
Alternative Name
Halim, Nur Hamidah Abdul
Halim, N. H.A.
Hamidah A Halim, N.
Halim, N. H.
Halim, N. Hamidah A.
Abdul Halim, Nur Hamidah
Main Affiliation
Scopus Author ID
55493444600

Research Output
Now showing 1 - 6 of 6
  • Publication
    Mediatorless impedance studies with titanium dioxide conjugated gold nanoparticles for hydrogen peroxide detection
    ( 2017)
    Nur Hamidah Abdul Halim
    ;
    Yook Lee
    ;
    Radha Marugan
    ;
    Uda Hashim
    An impedimetric-based biosensor constructed using gold nanoparticles (AuNP) entrapped within titanium dioxide (TiO2) particles for hydrogen peroxide (H2O2) detection is the main feature of this research. The matrix of the biosensor employed the surface of TiO2, which was previously modified with an amine terminal group using 3-Aminopropyltriethoxysilane (APTS) at a low temperature to create a ready to immobilise surface for the biosensor application. Hemoglobin (Hb), which exhibits peroxidase-like activity, was used as the bioreceptor in the biosensor to detect H2O2 in solution. The analysis was carried out using an alternative impedance method, in which the biosensor exhibited a wide linear range response between 1 × 10−4 M and 1.5 × 10−2 M and a limit of detection (LOD) of 1 × 10−5 M without a redox mediator.
  • Publication
    Cost effective negative Plenum Cleanroom for Microelectronic Engineering undergraduate
    ( 2005)
    Uda Hashim
    ;
    Zul Azhar Zahid Jamal
    ;
    Mohammad Nuzaihan Md Nor
    ;
    Nur Hamidah Abdul Halim
    he Negative Plenum Cleanroom which is design and built by KUKUM is primarily used for the teaching of the undergraduate microelectronic course. The cleanroom is approximately 115m² in size. The level of cleanliness in the cleanroom ranges from ISO Class 5 (Yellow Room) to ISO Class 8 (Grey Area/Utility Chase). The cleanroom is constructed with a negative plenum to house the fan filter units, which make it different from other commercially available cleanrooms. With negative plenum, maintenance work cost will be reduced and make the cleanroom life longer. The main intention of this project is to expose and teach students to appreciate the stringent cleanroom protocols, health and safety requirement in addition to the formal course works.
  • Publication
    Fabrication and simulation of silicon nanowire pH sensor for Diabetes Mellitus detection
    ( 2023-04)
    C. Y. Chean
    ;
    Mohammad Nuzaihan Md Nor
    ;
    Mohamad Faris Mohamad Fathil
    ;
    M. I. Hashim
    ;
    Nur Hamidah Abdul Halim
    ;
    Zarimawaty Zailan
    ;
    Mohd Khairuddin Md Arshad
    ;
    Syamsul Syahrun Awang@Hashim
    ;
    Rozaimah A.T
    Diabetes Mellitus (DM) is a disease failed to control the balance of blood sugar level due to lack of insulin thereby it effect human health. In Malaysia, there are around 3.9 millions people aged 18 years old and above have diabetes according to National Health and Morbidity Survey 2019. Silicon Nanowire is a nanostructure which has ultra-high sensitivity and non-radioactive that has potential given good performances when applied on pH sensor and biosensor. Silicon nanowire pH sensor and biosensor is an electronic sensor that investigated to improve the sensitivity and accuracy for detecting DM. This project consists of two parts, which are fabrication of silicon nanowire pH sensor and simulation of silicon nanowire biosensor as preliminary study. In fabrication, silicon nanowire of pH sensor is fabricated by conventional lithography process, reaction ion etching (RIE) and metallization to achieved the width of 100 nm silicon nanowire. The pH6, pH7, pH10 and DI water as analytes to analysis the current-voltage (I-V) characteristics of silicon nanowire pH sensor. In second part, the silicon nanowire biosensor as preliminary study is done simulation by Silvaco ATLAS devices simulator. The silicon nanowire with 30 nm in height and 20 nm in width of biosensor is designed and simulated to analyze the performance in terms of sensitivity. I-V characteristics of silicon nanowire biosensor according to different concentration of negative interface charge is determined. The negative interface charge represent as the Retinol Binding Protein 4 (RBP4) which is used to diagnose DM. The I-V characteristic based on the change in current, resistance and conductance to determine sensitivity. Lastly, the sensitivity of silicon nanowire pH sensor obtained 23.9 pS/pH while the sensitivity of simulated silicon nanowire biosensor obtained 3.91 nS/e.cm2. The results shown the more negative charge of concentration analyte attached on surface silicon nanowire has been accumulated more current flow from drain terminal to source terminal. It leads to the resistance becomes highest and obtained good sensitivity. In summary, the silicon nanowire pH sensor exhibited good performance and high sensitivity in detection pH level. The simulated silicon nanowire biosensor is capable of detecting biomolecular interactions charges to obtained high sensitive and accuracy result.
  • Publication
    Facile electrical DNA genosensor for human papillomavirus (HPV 58) for early detection of cervical cancer
    ( 2023-07)
    F. Nadhirah Jaapar
    ;
    Nor Azizah Parmin
    ;
    Nur Hamidah Abdul Halim
    ;
    Uda Hashim
    ;
    Subash Chandra Bose Gopinath
    ;
    Ruslinda A. Rahim
    ;
    Sh. Nadzirah
    ;
    Voon Chun Hong
    ;
    Muhammad Nur Aiman Uda
    ;
    Wei Chern Ang
    ;
    Iffah Izzati Zakaria
    ;
    Zulida Rejali
    ;
    Amilia Afzan
    ;
    Azrul Azlan Hamzah
    ;
    Chang Fu Dee
    ;
    F. Syakirah Halim
    For decades, a Pap smear test has been applied as a conventional method in detecting Human Papillomavirus caused cervical cancer. False-positive results were also recorded while using it as conventional method. Current biosensor such as Hybrid (II) Capture resulted in higher time consumption and cost. s Meanwhile, in this study we provided facile, mini, rapid, highly sensitive, eco-friendly, and cost-effective sensing system focusing on HPV strain 58 (HPV58) in a nano-size lab-on-chip technology genosensor. 30-mer of virus ssDNA designed and analyzed as a probe via bioinformatics tools such as GenBank, Basic Local Alignment Searching Tools (BLAST) and ClustalW. Nanotechnology-developed colloidal Gold-nanoparticles (AuNPs) are used in the biosensor fabrication to produce high stability and electron efficient transmission during electrical measurement. AuNPs-APTES modified on active sites of IDEs, followed by immobilization of specific probe ssDNA for HPV 58. Hydrogen binding during hybridization with its target produce electrical signals measured by KEITHLEY 2450 (Source Meter). The genosensor validated with different types of targets such as complimentary, non-complementary and single mismatch oligonucleotides. The serial dilution of target concentration has been experimented triplicate (n=3) range from 1fM to 10μM. The slope of calibration curve resulted 2.389E-0 AM-1 with regression coefficient (R2) = 0.97535.
  • Publication
    Electrochemiluminescence of carbon dots and nitrogen-doped carbon dots from a microwave-assisted method
    ( 2023-10)
    Nurul Izzati Akmal Mohd Azman
    ;
    Muhammad Amirul Afiq Abdul Halim
    ;
    Nur Syakimah Ismail
    ;
    Nur Hamidah Abdul Halim
    ;
    Nurjuliana Juhari
    ;
    Norhayati Sabani
    ;
    Siti Aisyah Shamsudin
    ;
    Eiichi Tamiya
    This research focuses on the use of carbon dots (CDs) and nitrogen-doped carbon dots (NCDs) synthesized using a microwave-assisted method as electrochemiluminescence (ECL) luminophores. CDs have been synthesized using citric acid, while various concentrations of nitrogen-doped CDs have been successfully obtained by varying the amount of urea from 1 to 3 g with citric acid to produce NCD1, NCD,2 and NCD3. The ECL mechanism of CDs and NCDs on screen-printed electrodes has been studied using cyclic voltammetry (CV). ECL emission from as-prepared CDs and NCDs was observed in PBS with potassium persulfate (K2S2O8) as a co-reactant. The addition of potassium chloride (KCl) as a supporting electrolyte displays fast electroreduction of CDs and K2S2O8 to expedite the generation of CDs and peroxydisulfate radicals that simultaneously increase ECL intensity. Furthermore, as the concentration of nitrogen-doped CDs increases, so does the intensity of the ECL. NCD3 shows the highest ECL intensity by an increment of 86.4% in comparison to CDs in PBS with the addition of K2S2O8 and KCl. Finally, optimization of ECL measurement was carried out in terms of CV potential range, concentration of luminophore, supporting electrolyte, and co-reactant using NCD3 luminophore. The CV potential range at 0 to -2 V shows 50 mV of early CV reverse onset potential that resulted in an increase of 52.9% ECL intensity. Meanwhile, 30x dilution of NCD3, 0.1 M of supporting electrolyte KCl, and 0.1 M of co-reactant K2S2O8 show the optimum value to obtain high ECL intensity.