Mohd Fairus Ahmad
Thumbnail Image
Preferred name
Mohd Fairus Ahmad
Official Name
Mohd Fairus , Ahmad
Alternative Name
Shahimin, Mohd Faidz Mohamad
Mohamad Shahimin, M. F.
Main Affiliation
Scopus Author ID
57006554500
Researcher ID
B-9547-2018

Research Output

Filters

10
Reset filters

Settings
Now showing 1 - 10 of 10
  • Publication
    A review of visible-to-UV photon upconversion systems based on triplet–triplet annihilation photon upconversion
    ( 2022-12)
    Kelvin Voon Yan Jie
    ;
    Mohd Fairus Ahmad
    ;
    Muhammad Mahyiddin Ramli
    ;
    Safizan Shaari
    ;
    Arif Mawardi Ismail
    ;
    Yusran Sulaiman
    Due to the tunable spectrum range and potential application under non-coherent solar irradiation, triplet-triplet annihilation based molecular photon upconversion (TTA-UC) systems represent a compelling study field for a variety of photonic implementations. There were studies on the incorporation of TTA-UC technology with photovoltaic technology, which made it possible to further improve the energy harvest performance through the utilisation of the wasted spectrum. However, many TTA-UC studies are limited to energy upconversion within the visible spectrum range. For photovoltaic cells with a higher band gap, which harvest the higher energy spectrum (UV region), an efficient Vis-to-UV upconversion is preferred. The Vis-to-UV TTA-UC system was first introduced in 2006. Recently, more studies were conducted to discover the Vis-to-UV upconversion system with high quantum efficiency and low excitation intensity such as the nanocrystal sensitizerbased system and the thermally activated delayed fluorescence sensitizer-based system. Recent studies in the solvent system of Vis-to-UV upconversion system had demonstrated the dependence of the couple photostability on the solvent and extended the solvent selection to inorganic solvent. In this review, we are reviewing the research background of the Vis-to-UV TTA-UC system and discussing the current challenges and potential developments in this research area.
  • Publication
    Fabrication of Strontium Titanate thin film with pre-crystallized layer via sol-gel spin coating method
    ( 2022-12)
    Kelvin Voon Yan Jie
    ;
    Mohd Fairus Ahmad
    ;
    Muhammad Mahyiddin Ramli
    ;
    Safizan Shaari
    ;
    Arif Mawardi Ismail
    ;
    Yusran Sulaiman
    The technique of pre-crystallized layer is introduced in the strontium titanate (STO) thin film fabrication to improve the coating thickness and the crystallinity. The STO thin films were fabricated on glass substrates via the spin coating method with STO precursor solution that was synthesized through the sol-gel process. The characteristics of the thin films were analyzed through X-ray diffraction (XRD) analysis, profilometry, UV-Vis spectra analysis and scanning electron microscopy (SEM) analysis. In the present study, the samples of 20 layers and 25 layers (deposited on the pre-crystallized layer) exhibited better crystallinity as compared with the samples of 5 layers, 10 layers and 15 layers (without the pre-crystallized layer). The samples of 25 layers exhibited the highest film thickness (224 nm), highest absorbance intensity and the highest XRD peak intensity at 32, 40, 47 and 58°, which represent the planes (110), (111), (200) and (210), respectively. The pre-crystallized layer served as the mechanical support for further layer deposition.
  • Publication
    Temperature effects on electrical and structural properties of MEH-PPV/PEIE OLED Device
    ( 2020-06-16)
    Nurul Afiqah Nor Ismail
    ;
    Safizan Shaari
    ;
    Mohd Fairus Ahmad
    ;
    Norhayati Sabani
    ;
    Nurjuliana Juhari
    ;
    Nor Farhani Zakaria
    This paper explores the performance of configuration ITO/MEH-PPV/PEIE/Al OLED under the variations of temperature. The MEH-PPV and MEH-PPV/PEIE thin film were deposited on ITO substrates using spin coating technique with fixed spin speed of 3000 rpm and baked at low temperature ranging from 90 °C to 180 °C, respectively. The surface roughness values for MEH-PPV and MEH-PPV/PEIE films were analysed using AFM with 5 μm ' 5 μm scanning area. The roughness of MEH-PPV thin films were reduced from 2.825 nm to 1.625 nm when temperature increased. Contrary to MEH-PPV/PEIE films where the roughness increased linearly up to 3.397 nm when the temperature increased. The maximum absorption peak spectrum obtained from UV-Visible (UV-Vis) was found at 500 nm to 510 nm when baked temperature were varied. Furthermore, the turn on voltage from J-V characteristics gives no specific pattern across different temperature and agreed with the trend of surface roughness values. The turn-on voltage at T = 150 °C gives the lowest value of 3 V. Overall, the variations of low temperature gives an effects on structural and electrical properties of this OLED configuration.
  • Publication
    Modification of Photoanode Surface Structure via Image Analysis on Organic Polymer Material based for Dye-Sensitized Solar Cell (DSSC) Applications
    ( 2021-12-01)
    Rosli N.
    ;
    Norhayati Sabani
    ;
    Mohd Fairus Ahmad
    ;
    Azidin M.A.M.
    ;
    Nurjuliana Juhari
    ;
    Zakaria N.F.
    ;
    Mohd Natashah Norizan
    ;
    Safizan Shaari
    In this study, the experiment on the modification of the photoanode with organic polymer material as copolymer template for dye-sensitized solar cell (DSSC) applications has been conducted. The two organic copolymer templates are polystyrene sphere (PS) and poly[2-methoxy-5(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV). The modification photoanodes were made using Dr. Blade’s method. These organic copolymer templates were added to improve the surface of the mesoporous titanium dioxide (TiO2) layer, which is used as the main component in DSSC photoanode. The unmodified TiO2 photoanode has poor aggregation and porosity of TiO2. The addition of either MEH-PPV or PS sphere to the photoanode layer was found to affect the surface of mesoporous TiO2 in terms of porosity, particle size distribution and shape. The analysis of the TiO2 modification was conducted using an image analysis processing method via a 2D scanning electron microscope (SEM) image. The image analysis processing method used was the ImageJ program. The DSSC of modified photoanode is fabricated using metal complex dye, Ruthenium (N719) dye. The data collected from the ImageJ program showed that by adding organic copolymer templates into TiO2, the porosity of TiO2 decreased from 45 % to 42 %. From the photovoltaic analysis obtained, the J-V characteristic is recorded with the photoanode of TiO2 mixed with 1.00 wt% MEH-PPV gave the highest efficiency, which is 0.01 % with the following parameters – Voc = 0.43 V, Jsc = 0.17 mA/cm2 and FF = 0.20. Meanwhile, the photoanode of TiO2 mixed with 0.50 wt% PS sphere gave the highest efficiency which is 0.08 % with the following parameters – Voc = 0.39 V, Jsc = 0.86 mA/cm2 and FF = 0.25.
  • Publication
    The effect of solvents on the performance of organic light-emitting diodes
    ( 2020-01-08)
    Ismail N.A.N.
    ;
    Safizan Shaari
    ;
    Juhari N.
    ;
    Norhayati Sabani
    ;
    Mohd Fairus Ahmad
    ;
    Zakaria N.F.
    In this paper, we investigate the solvent effect on the performance of surface roughness, absorption spectrum of MEH-PPV thin films and J-V characteristics for MEH-PPV OLED device. The 5 mg emissive layer of poly [2-methoxy-5(2' -ethylhexyloxy)-1, 4-phenylenevinylene), MEH-PPV was diluted with 1ml toluene and 1 ml different mixture of solvent (80% toluene+20 % chloroform) which gives the concentration of 5 mgml-1 respectively. The surface roughness of MEH-PPV film was reduced to 0.3 nm and the red-shifted maximum peak wavelength value were obtained when mixture solvent was used. However, J-V gives higher turn on voltage ∼17 V for the device used mixture solvent compared to device prepared by toluene solvent. Apparently, the two different combination of aromatic and non-aromatic solvent significantly gives an effect on thin films properties and electrical properties of MEH-PPV OLED device.
  • Publication
    Visible Light-Assisted Charge Extraction in High-Band-Gap SrTiO3 through the Integration of a Triplet Sensitizer-Emitter Thin Film
    ( 2024-01-22)
    Jie K.V.Y.
    ;
    Mohd Fairus Ahmad
    ;
    Mohmad A.R.
    ;
    Ismail A.M.
    ;
    Mohd Natashah Norizan
    ;
    Ramli M.M.
    ;
    Safizan Shaari
    ;
    Sulaiman Y.
    ;
    Shamsul Amir Abdul Rais
    ;
    Shazlina Johari
    A challenge in PV designs, including those with an electron transport layer (ETL), is the presence of ‘parasitic absorbers’. These are layers that absorb light without significantly converting it to electrical current, impacting the total external quantum efficiency (EQE). Strontium titanate (STO), a high-band-gap (3.20 eV) perovskite metal oxide, holds promise as an electron transport layer (ETL) for solar energy harvesting. Despite STO’s potential, it primarily operates in the UV spectrum, not fully utilizing the broader light range, and hence can be the source of parasitic absorbers. In this study, we report a significant enhancement in the EQE of STO through the integration of a triplet sensitizer-emitter (TSE) system, designed to upconvert the visible spectrum into UV light and improve the charge extraction from STO. The TSE system uses carbazolyl dicyanobenzene (4CzIPN) as a sensitizer and p-terphenyl (TP) as an emitter. To investigate the EQE of such a system, we fabricate STO as a PV cell. The revised PV cell architecture (ITO/TiO2/STO/TSE/PEDOT:PSS/Al) is a modification of the conventional configurations (ITO/TiO2/STO/PEDOT:PSS/Al). With the TSE thin film, the modified STO PV cell shows better charge extraction under sunlight compared to the standard STO PV cell, indicating that the upconversion process can enhance the hole conductions from STO to PEDOT:PSS through the TSE system. We noted an EQE increase with intense light of λ > 345 nm in thicker TSE layers and a decrease in the EQE under similar light intensity in thinner TSE layers. The Kelvin probe force measurement (KPFM) data showed that the TSE layer receives holes from STO under illumination. Additionally, time-resolved photoluminescence (TRPL) experiments showed that the TSE/STO thin film is able to produce UV emission after irradiation with lower energy light. Then, the EQE variation in thicker TSE layers under intense irradiation can be attributed to the solid-state upconversion, indicating its thickness-dependent performance. These findings underline the strategies for maximizing the utilization of the solar spectrum in PV applications.
  • Publication
    The structural and electrical characterization of PEDOT:PSS/MEH-PPV doped with PEIE OLED fabricated using spin coating technique
    ( 2020-01-08)
    Juhari N.
    ;
    Shukri N.I.A.
    ;
    Norhayati Sabani
    ;
    Safizan Shaari
    ;
    Mohd Fairus Ahmad
    ;
    Nor Farhani Zakaria
    This paper investigates the performance of the uniformity and absorption spectrum of MEHPPV+PEIE thin films also the electrical properties for configuration of ITO/PEDOT: PSS/MEH+PEIE/Al. The sample used 0.5 wt % of PEDOT: PSS solution while 5 mgml-1 concentration of MEH-PPV solution was doped with four different concentrations of PEIE with values of 0.1 wt%, 0.3 wt%, 0.5 wt% and 0.7 wt% respectively. The untreated PEDOT: PSS and MEH-PPV+PEIE was deposited using spin coating technique at a fixed spun speed of 3000 rpm to obtain smooth surface roughness thin film. The root mean square (RMS) value, absorption spectrum and current density (A/cm-2) of the PEDOT: PSS and MEH-PPV+PEIE films were analyzed using Atomic Force Microscope (AFM), UV-Visible (UV-Vis) Spectrophotometer and Semiconductor Parametric Analyzer (SPA), respectively. The surface roughness of the films were linearly increased when the dopant concentration increased with the maximum RMS value of ∼4.74 nm. Besides, absorption peak wavelength also was red-shifted from 500 nm to 551 nm under an influence of PEIE dopant concentrations. However, the turn on voltage gives no significant trend when dopant concentration was increased but the emission of the light was emitted when the voltage was below 8 V. Among four different dopant concentrations of MEH-PPV+PEIE, the brighter light emission was observed at 0.3 wt% of PEIE. Apparently, the concentration of dopant solution gives a significant contribution to the performance of OLED in terms of structural, optical and electrical properties.
  • Publication
    The efficiency effect of dye sensitized solar cell using different ratio of organic polymer doped titanium dioxide at different annealing process temperature
    ( 2020-01-08)
    Norhisamudin N.A.
    ;
    Norhayati Sabani
    ;
    Rosli N.
    ;
    Mohd Fairus Ahmad
    ;
    Juhari N.
    ;
    Safizan Shaari
    ;
    Zakaria N.
    Titanium Dioxide (TiO2) is one of the main materials in Dye Sensitized Solar Cell (DSSC). It is well known with its property of good optical transmittance and its mesoporous surface that can absorb generous amount of dye. In this study, TiO2 is fabricated using spin coating technique that leads to the uniform thickness of TiO2 layer. The thickness of the TiO2 can be controlled layer by layer using same technique to get an optimized surface that can lead to better performance of DSSC. In order to achieve this, the surface roughness of TiO2 must be as high as possible. Therefore, the organic material which is Poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene-vinylene (MEH-PPV) is used as medium to increase the mesoporous roughness structure of TiO2 nanocrystal film for DSSC. MEH-PPV is doped into the TiO2 using 0.5 mg/ml with different temperatures of 100°C and 450°C. Different temperatures of MEH-PPV will lead to the different surface structures for TiO2 thin film. The ratio of TiO2:MEH-PPV used were 1:1 and 2:1. The surface of TiO2 thin film was characterized using Atomic Force Microscope (AFM). The efficiency was obtained using Solar Simulator based on the voltage and current flow. Based on the results, the increment of surface roughness is about 21% for the different ratio at various temperatures. The optimum temperature and suitable ratio of TiO2:MEH-PPV was obtained via annealing process at 450°C with the ratio of 2:1. It gives the highest efficiency which is 0.1266%. These two important findings yield good mesoporous surface of TiO2 thin film.
  • Publication
    Photoluminescence measurement of triplet sensitizer-emitter solution using a customized 3D-printed sample holder
    ( 2024-06)
    Kelvin Voon Yan Jie
    ;
    Safizan Shaari
    ;
    Mohd Fairus Ahmad
    ;
    Nor Farhani Zakaria
    ;
    Norhayati Sabani
    This study explores the photoluminescence (PL) measurement of triplet sensitizer-emitter (TSE) solutions using a custom 3D-printed sample holder, within the context of triplet-triplet annihilation based molecular photon upconversion (TTA-UC) systems targeting the Vis-to-UV spectral region. TTA-UC converts low-energy visible photons to higher-energy ultraviolet (UV) photons, holding promise for solar energy harvesting and photonics applications. Two TSE couples, 4CzIPN/TP and 4CzIPN/QP, were investigated, and their upconverted fluorescence spectra showed peaks at 344 nm and 354 nm / 370 nm, respectively, confirming efficient upconversion capabilities. The 3D-printed sample holder facilitated reproducible PL measurements, enabling the calculation of quantum yields (ΦUC). The 4CzIPN/TP and 4CzIPN/QP couples exhibited low quantum yields (0.028% and 0.043%, respectively), suggesting the need for improved deoxygenation methods to enhance the triplet-triplet annihilation process and overall quantum efficiency. Despite modest yields, successful UV upconverted fluorescence observation underscores the feasibility of the Vis-to-UV TTA-UC system. This study provides insights into TTA-UC optimization and demonstrates the utility of the 3D-printed sample holder for affordable and precise PL measurements, paving the way for future advancements in photonics and solar energy applications.
  • Publication
    Modification of Photoanode Surface Structure via Image Analysis on Organic Polymer Material based for Dye-Sensitized Solar Cell (DSSC) Applications
    ( 2021-12-01)
    Nur Liyana Mohd Rosli
    ;
    Norhayati Sabani
    ;
    Mohd Fairus Ahmad
    ;
    Mohd. Azarulsani Md. Azidin
    ;
    Nurjuliana Juhari
    ;
    Nor Farhani Zakaria
    ;
    Mohd Natashah Norizan
    ;
    Safizan Shaari
    In this study, the experiment on the modification of the photoanode with organic polymer material as copolymer template for dye-sensitized solar cell (DSSC) applications has been conducted. The two organic copolymer templates are polystyrene sphere (PS) and poly[2-methoxy-5(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV). The modification photoanodes were made using Dr. Blade’s method. These organic copolymer templates were added to improve the surface of the mesoporous titanium dioxide (TiO2) layer, which is used as the main component in DSSC photoanode. The unmodified TiO2 photoanode has poor aggregation and porosity of TiO2. The addition of either MEH-PPV or PS sphere to the photoanode layer was found to affect the surface of mesoporous TiO2 in terms of porosity, particle size distribution and shape. The analysis of the TiO2 modification was conducted using an image analysis processing method via a 2D scanning electron microscope (SEM) image. The image analysis processing method used was the ImageJ program. The DSSC of modified photoanode is fabricated using metal complex dye, Ruthenium (N719) dye. The data collected from the ImageJ program showed that by adding organic copolymer templates into TiO2, the porosity of TiO2 decreased from 45 % to 42 %. From the photovoltaic analysis obtained, the J-V characteristic is recorded with the photoanode of TiO2 mixed with 1.00 wt% MEH-PPV gave the highest efficiency, which is 0.01 % with the following parameters – Voc = 0.43 V, Jsc = 0.17 mA/cm2 and FF = 0.20. Meanwhile, the photoanode of TiO2 mixed with 0.50 wt% PS sphere gave the highest efficiency which is 0.08 % with the following parameters – Voc = 0.39 V, Jsc = 0.86 mA/cm2 and FF = 0.25.