Research Output
1 - 6 of 6
-
Publication5.8 GHz Circularly Polarized Rectangular Microstrip Antenna Arrays simulation for Point-to-Point Application( 2022-11-01)In this paper, the design and simulation of rectangular microstrip antenna arrays for improving antenna gain is performed for point-to-point application. The circular polarization is proposed to restrict the limitation of linear polarization which is less reliable in base station antenna. The circular polarization antenna is made to allow the receiver constantly to receive the power at any wave angle and make the transmission between two antennas are more constant. The proposed design is composed of four elements microstrip antenna with an array configuration operating at 5.8 GHz. Each element is constructed from four truncated arrays radiating elements and an inclined slot on each patch which capable to achieve circular polarized capability. The design of the 2x1 and 2x2 of rectangular microstrip array antenna was implemented from the design of single rectangular patch antenna as the basic building element. The designed 2x1 and 2x2 array were fed by microstrip transmission line which applied a technique of quarter wave impedance matching. The antenna design was etched on Rogers RT 5880 substrate with 2.1 and 1.53 mm of dielectric constant and thickness respectively. All the designed structure were simulated in CST software. The main results of the designed antennas were compared in terms of gain, axial ratio and return loss. Based on the return loss simulation results, the designed antennas resonated exactly at the desired resonant frequency of 5.8 GHz which indicates good antenna designs. Compared to the single patch antenna having an antenna gain of 8.26 dB, the 2x1 and 2x2 arrays achieved a gain of 10.24 dB and 13.29 dB respectively. The results show that the designed rectangular microstrip antenna arrays have an improved gain performance over the single patch antenna.
-
PublicationPerpendicular High Isolation MIMO Antenna( 2022-01-01)This research presented a perpendicular high isolation MIMO antenna for LTE advance application. A high gain perpendicular MIMO antenna is concentrated on designing used in LTE advance application. The issues of low isolation of conventional antenna can be solved by structuring a MIMO antenna in order to increase the isolation in LTE advance application. Generally, the array antenna design causes a bigger antenna size and has a mutual coupling which lead to spectral efficiency damage and reduce the MIMO antenna framework performance. The substrate material like FR-4 is choosing as a dielectric substrate due to its good performances for many applications beside it has a low cost and more usable. The advantage of copper such as has a great relative material, cheaper and easy to construct is choose in this project as a conductive material. ADS software has been utilized for the structure stage to design the antenna. Then, the results are evaluated in terms of return loss (S11 and S22), mutual coupling (S12 and S21), match impedance, directivity, radiation pattern, gain and radiated power. Vector Network Analyzer (VNA) is used to measure the fabricated antenna. The factor of cable loses and the soldering technique will make the measurement result was slightly change from the simulating result. However, the antenna design satisfied the proficiency necessity of the antenna which the frequency is drop at 2.5 GHz with the return loss is below than −10 dB.
-
PublicationSplit Ring Resonator Array Metamaterial of Zero Index Unit Cell Configuration( 2022-01-01)A split-ring resonator (SRR) array metamaterial of zero-index unit cell configuration has been proposed. The SRR is made up of four loops; r1, r2, r3, and r4, which are inductance related, and the gaps (slots) are introduced to the ring to create the capacitance effect. The split ring is designed and simulated using sophisticated simulation software to have accurate simulation results. The SRR is placed between two waveguide terminals on the z-axis, at the top and bottom of the z-axis, respectively. SRR unit cell is configured into two array structures with a size of 110 x 65 mm2 which are the 7 x 4-unit cell and the 10 x 5-unit cell. A parametric study has been carried out for the split ring resonator to find the optimized design to have zero index as well as positive permittivity and permeability at the desired frequency of 2.7 GHz. Both array configurations recorded zero index (phase) at the desired frequency of 2.70 GHz. The positive on the point of close to zero results of the real part of permittivity and permeability lies at frequency 2.70 GHz as well.
-
PublicationRefraction method of metamaterial for antenna( 2021-01-01)This paper reviews several refraction methods of metamaterial. Metamaterial is an engineered structure to produce electromagnetic properties that is not naturally occurred in ordinary material, such as negative permittivity, negative permeability and negative refractive index. This reviewed paper focuses on negative refractive index application where complies with microwave and optical frequency ranges. Each method provides different frequency range. Split ring resonator used in microwave radiation enhances the gain while fishnet-chiral planar structure is used in photonic frequency. The photonic metamaterial acts similar to lens, which leads to enhancing the gain of the microwave.
-
PublicationA hybrid modified sine cosine algorithm using inverse filtering and clipping methods for low autocorrelation binary sequences( 2022-01-01)The essential purpose of radar is to detect a target of interest and provide information concerning the target's location, motion, size, and other parameters. The knowledge about the pulse trains' properties shows that a class of signals is mainlywell suited to digital processing of increasing practical importance. A low autocorrelation binary sequence (LABS) is a complex combinatorial problem. The main problems of LABS are low Merit Factor (MF) and shorter length sequences. Besides, the maximumpossibleMF equals 12.3248 as infinity length is unable to be achieved. Therefore, this study implemented two techniques to propose a new metaheuristic algorithm based on Hybrid Modified Sine Cosine Algorithm with Cuckoo Search Algorithm (HMSCACSA) using Inverse Filtering (IF) and clipping method to achieve better results. The proposed algorithms, LABS-IF and HMSCACSA-IF, achieved better results with two large MFs equal to 12.12 and 12.6678 for lengths 231 and 237, respectively, where the optimal solutions belong to the skew-symmetric sequences. TheMFoutperformed up to 24.335% and 2.708% against the state-of-the-art LABS heuristic algorithm, xLastovka, and Golay, respectively. These results indicated that the proposed algorithm's simulation had quality solutions in terms of fast convergence curve with better optimal means, and standard deviation.
1 -
PublicationMobile Green E-Waste Management Systems using IoT for Smart Campus( 2021-07-26)This paper presents the design and development of mobile "green"electronic waste (e-waste) management systems using Internet of Things (IoT) for smart campus. The system uses Raspberry Pi 3 Model B v1.2 microcontroller for monitoring e-waste object detection, e-waste count, and bin percentage level, respectively. TensorFlow Lite application programming interface (API) is used to run Single Shot Multibox Detector (SSD)Lite-MobileNet-v2 model trained on Microsoft Common Objects in Context (MSCOCO) dataset for e-waste object detection in image. All the monitoring data are stored and retrieved in ThingSpeak cloud platform using Hypertext Transfer Protocol (HTTP) and Message Queuing Telemetry Transport (MQTT) protocol over the Internet and displayed via interactive Android-based mobile user interface (UI). Furthermore, automatic e-mail notification will be sent to waste collector for bin collection whenever e-waste bin percentage level is greater than predetermined threshold value of 80% full.
1