Shayfull Zamree Abd. Rahim
Thumbnail Image
Preferred name
Shayfull Zamree Abd. Rahim
Official Name
Shayfull Zamree, Abd. Rahim
Alternative Name
Shayfull, Zamree Abd Rahim
Abd Rahim, Shayfull Zamree Abd
Shayfull, Zamree
Abd Rahim, S. Z.
Abd Rahim, Shayfull Zamree Bin
Bin Abd Rahim, S. Zamree
Abd Rahim, S.
zamree bin abd Rahim, Shayfull
Rahim, Shayfull Zamree Abd
Zamree Abd Rahim, Shayfull
Zambree, Shayfull
Rahim, Shayfull Z.B.Abd
Zamree, A. R.Shayfull
Shayfull, Z.
Main Affiliation
Scopus Author ID
54941291700
Researcher ID
I-2840-2019

Research Output

Filters

1
9
Reset filters

Settings
Now showing 1 - 9 of 9
  • Publication
    Contribution of interfacial bonding towards geopolymers properties in geopolymers reinforced fibers: a review
    ( 2022)
    Muhd Hafizuddin Yazid
    ;
    Meor Ahmad Faris bin Meor Ahmad Tajudin
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Marcin Nabiałek
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Marwan Kheimi
    ;
    Andrei Victor Sandu
    ;
    Adam Rylski
    ;
    Bartłomiej Jeż
    There is a burgeoning interest in the development of geopolymers as sustainable construction materials and incombustible inorganic polymers. However, geopolymers show quasi-brittle behavior. To overcome this weakness, hundreds of researchers have focused on the development, characterization, and implementation of geopolymer-reinforced fibers for a wide range of applications for light geopolymers concrete. This paper discusses the rapidly developing geopolymer-reinforced fibers, focusing on material and geometrical properties, numerical simulation, and the effect of fibers on the geopolymers. In the section on the effect of fibers on the geopolymers, a comparison between single and hybrid fibers will show the compressive strength and toughness of each type of fiber. It is proposed that interfacial bonding between matrix and fibers is important to obtain better results, and interfacial bonding between matrix and fiber depends on the type of material surface contact area, such as being hydrophobic or hydrophilic, as well as the softness or roughness of the surface.
  • Publication
    Strength and durability of sustainable self-consolidating concrete with high levels of supplementary cementitious materials
    ( 2022)
    Moslih Amer Salih
    ;
    Shaymaa Alsafi
    ;
    Mohd Mustafa Al Bakri Abullah
    ;
    Ramadhansyah Putra Jaya
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Ikmal Hakem Aziz
    ;
    I Nyoman Arya Thanaya
    Self-consolidating concrete (SCC) has been used extensively in the construction industry because of its advanced characteristics of a highly flowable mixture and the ability to be consolidated under its own weight. One of the main challenges is the high content of OPC used in the production process. This research focuses on developing sustainable, high-strength self-consolidating concrete (SCC) by incorporating high levels of supplementary cementitious materials. The overarching purpose of this study is to replace OPC partially by up to 71% by using fly ash, GGBS, and microsilica to produce high-strength and durable SCC. Two groups of mixtures were designed to replace OPC. The first group contained 14%, 23.4%, and 32.77% fly ash and 6.4% microsilica. The second group contained 32.77%, 46.81%, and 65.5% GGBS and 6.4% microsilica. The fresh properties were investigated using the slump, V-funnel, L-box, and J-ring tests. The hardened properties were assessed using a compressive strength test, while water permeability, water absorption, and rapid chloride penetration tests were used to evaluate the durability. The innovation of this experimental work was introducing SCC with an unconventional mixture that can achieve highly durable and high-strength concrete. The results showed the feasibility of SCC by incorporating high volumes of fly ash and GGBS without compromising compressive strength and durability.
  • Publication
    Potential of soil stabilization using Ground Granulated Blast Furnace Slag (GGBFS) and fly ash via geopolymerization method: a review
    ( 2022)
    Syafiadi Rizki Abdila
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Romisuhani Ahmad
    ;
    Dumitru Doru Burduhos Nergis
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Mohd Firdaus Omar
    ;
    Andrei Victor Sandu
    ;
    Petrica Vizureanu
    Geopolymers, or also known as alkali-activated binders, have recently emerged as a viable alternative to conventional binders (cement) for soil stabilization. Geopolymers employ alkaline activation of industrial waste to create cementitious products inside treated soils, increasing the clayey soils’ mechanical and physical qualities. This paper aims to review the utilization of fly ash and ground granulated blast furnace slag (GGBFS)-based geopolymers for soil stabilization by enhancing strength. Previous research only used one type of precursor: fly ash or GGBFS, but the strength value obtained did not meet the ASTM D 4609 (<0.8 Mpa) standard required for soil-stabilizing criteria of road construction applications. This current research focused on the combination of two types of precursors, which are fly ash and GGBFS. The findings of an unconfined compressive strength (UCS) test on stabilized soil samples were discussed. Finally, the paper concludes that GGBFS and fly-ash-based geo-polymers for soil stabilization techniques can be successfully used as a binder for soil stabilization. However, additional research is required to meet the requirement of ASTM D 4609 standard in road construction applications, particularly in subgrade layers.
  • Publication
    Evaluation on the mechanical properties of Ground Granulated Blast Slag (GGBS) and fly ash stabilized soil via geopolymer process
    ( 2021)
    Syafiadi Rizki Abdila
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Romisuhani Ahmad
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Małgorzata Rychta
    ;
    Izabela Wnuk
    ;
    Marcin Nabiałek
    ;
    Krzysztof Muskalski
    ;
    Muhammad Faheem Mohd. Tahir
    ;
    Muhammad Syafwandi
    ;
    Marek Isradi
    This study intended to address the problem of damaged (collapsed, cracked and decreased soil strength) road pavement structure built on clay soil due to clay soil properties such as low shear strength, high soil compressibility, low soil permeability, low soil strength, and high soil plasticity. Previous research reported that ground granulated blast slag (GGBS) and fly ash can be used for clay soil stabilizations, but the results of past research indicate that the road pavement construction standards remained unfulfilled, especially in terms of clay’s subgrade soil. Due to this reason, this study is carried out to further investigate soil stabilization using GGBS and fly ash-based geopolymer processes. This study investigates the effects of GGBS and ratios of fly ash (solid) to alkaline activator (liquid) of 1:1, 1.5:1, 2:1, 2.5:1, and 3:1, cured for 1 and 7 days. The molarity of sodium hydroxide (NaOH) and the ratio of sodium silicate (Na2SiO3) to sodium hydroxide (NaOH) was fixed at 10 molar and 2.0 weight ratio. The mechanical properties of the soil stabilization based geopolymer process were tested using an unconfined compression test, while the characterization of soil stabilization was investigated using the plastic limit test, liquid limit test, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results showed that the highest strength obtained was 3.15 MPA with a GGBS to alkaline activator ratio of 1.5 and Na2SiO3 to NaOH ratio of 2.0 at 7 days curing time. These findings are useful in enhancing knowledge in the field of soil stabilization-based geopolymer, especially for applications in pavement construction. In addition, it can be used as a reference for academicians, civil engineers, and geotechnical engineers.
      3  10
  • Publication
    Potential of soil stabilization using Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash via Geopolymerization method: A Review
    ( 2022-01-01)
    Syafiadi Rizki Abdila
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Romisuhani Ahmad
    ;
    Nergis D.D.B.
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Mohd Firdaus Omar
    ;
    Sandu A.V.
    ;
    Vizureanu P.
    ;
    Syafwandi
    Geopolymers, or also known as alkali-activated binders, have recently emerged as a viable alternative to conventional binders (cement) for soil stabilization. Geopolymers employ alkaline activation of industrial waste to create cementitious products inside treated soils, increasing the clayey soils’ mechanical and physical qualities. This paper aims to review the utilization of fly ash and ground granulated blast furnace slag (GGBFS)-based geopolymers for soil stabilization by enhancing strength. Previous research only used one type of precursor: fly ash or GGBFS, but the strength value obtained did not meet the ASTM D 4609 (<0.8 Mpa) standard required for soil-stabilizing criteria of road construction applications. This current research focused on the combination of two types of precursors, which are fly ash and GGBFS. The findings of an unconfined compressive strength (UCS) test on stabilized soil samples were discussed. Finally, the paper concludes that GGBFS and fly-ash-based geo-polymers for soil stabilization techniques can be successfully used as a binder for soil stabilization. However, additional research is required to meet the requirement of ASTM D 4609 standard in road construction applications, particularly in subgrade layers.
      2
  • Publication
    Contribution of interfacial bonding towards geopolymers properties in geopolymers reinforced fibers: A review
    ( 2022)
    Muhd Hafizuddin Yazid
    ;
    Meor Ahmad Faris bin Meor Ahmad Tajudin
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Marcin Nabiałek
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Marwan Kheimi
    ;
    Andrei Victor Sandu
    ;
    Adam Rylski
    ;
    Bartłomiej Jeż
    There is a burgeoning interest in the development of geopolymers as sustainable construction materials and incombustible inorganic polymers. However, geopolymers show quasi-brittle behavior. To overcome this weakness, hundreds of researchers have focused on the development, characterization, and implementation of geopolymer-reinforced fibers for a wide range of applications for light geopolymers concrete. This paper discusses the rapidly developing geopolymer-reinforced fibers, focusing on material and geometrical properties, numerical simulation, and the effect of fibers on the geopolymers. In the section on the effect of fibers on the geopolymers, a comparison between single and hybrid fibers will show the compressive strength and toughness of each type of fiber. It is proposed that interfacial bonding between matrix and fibers is important to obtain better results, and interfacial bonding between matrix and fiber depends on the type of material surface contact area, such as being hydrophobic or hydrophilic, as well as the softness or roughness of the surface.
      2  9
  • Publication
    Thermal insulation and mechanical properties in the presence of glas bubble in fly ash geopolymer paste
    ( 2021)
    Noor Fifinatasha Shahedan
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Norsuria Mahmed
    ;
    Liew Yun Ming
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Ikmal Hakem A Aziz
    ;
    Aeslina Abdul Kadir
    ;
    Andrei Victor Sandu
    ;
    Mohd Fathullah Ghazli@Ghazali
    The density, compressive strength, and thermal insulation properties of fly ash geopolymer paste are reported. Novel insulation material of glass bubble was used as a replacement of fly ash binder to significantly enhance the mechanical and thermal properties compared to the geopolymer paste. The results showed that the density and compressive strength of 50% glass bubble was 1.45 g/ ely, meeting the standard requirement for structural concrete. Meanwhile, the compatibility of 50% glass bubbles tested showed that the thermal conductivity (0.898 W/mK), specific heat (2.141 MJ/m3 K), and thermal diffusivity(0.572 mm2/s) in meeting the same requirement. The improvement of thermal insulation properties revealed the potential use of glass bubbles as an insulation material in construction material
      5  14
  • Publication
    Potential of fly ash geopolymer concrete as repairing and retrofitting solutions for marine infrastructure: A review
    ( 2024)
    Noor Fifinatasha Shahedan
    ;
    Tony Hadibarata
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Muhammad Noor Hazwan Jusoh
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Ismallianto Isia
    ;
    Ana Armada Bras
    ;
    Aissa Bouaissi
    ;
    Filbert Hilman Juwono
    Corrosion in maritime infrastructure, particularly in reinforced concrete, has emerged as a significant cause for concern due to the presence of chloride ions in seawater. To address this challenge, geopolymer concrete has been proposed as a viable solution for retrofitting and restoring marine structures. This review paper explores the potential application of fly ash geopolymer concrete in marine infrastructure restoration. Fly ash's properties make it ideal for marine infrastructure restoration. Its high levels of amorphous silica and alumina enable geopolymerization, forming a strong binder resistant to chloride corrosion. Its fine, spherical particles enhance concrete workability and density, improving mechanical strength and impermeability. This geopolymer binder offers excellent resistance to corrosion from chloride ions commonly found in seawater, making fly ash geopolymer concrete highly suitable for marine applications. Overall, fly ash's chemical composition and physical traits offer resilience and sustainability in restoring marine infrastructure, ensuring long-term durability against corrosion. This review paper explores the potential application of fly ash geopolymer concrete in marine infrastructure restoration. By examining the primary forms of damage and mechanisms underlying concrete degradation in marine settings, this study highlights the durability and sustainability of geopolymer concrete compared to traditional concrete. Additionally, it discusses current solutions for repairing and retrofitting concrete in marine environments, emphasizing the promising characteristics of geopolymer concrete for integration into such structures. Through this analysis, innovative and environmentally conscious approaches are introduced for addressing corrosion-related challenges in the maritime industry, offering a resilient solution for the construction of enduring marine structures. Finally, recommendations for further research on the application of fly ash geopolymer concrete in marine infrastructure restoration are presented.
      9  9
  • Publication
    Crumb rubber geopolymer mortar at elevated temperature exposure
    ( 2022)
    Ahmad Azrem Azmi
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Che Mohd Ruzaidi Ghazali
    ;
    Romisuhani Ahmad
    ;
    Ramadhansyah Putra Jaya
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Mohammad A. Almadani
    ;
    Wysłocki, Jerzy J.
    ;
    Agata Śliwa
    ;
    Andre Victor Sandu
    Low calcium fly ash is used as the main material in the mixture and the crumb rubber was used in replacing fine aggregates in geopolymer mortar. Sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) which were high alkaline solution were incorporated as the alkaline solution. The fly ash reacted with the alkaline solution forming alumino-silicate gel that binds the aggregate to produce a geopolymer mortar. The loading of crumb rubber in the fly ash based geopolymer mortar was set at 0%
      1  7