Ong Soon An
Thumbnail Image
Preferred name
Ong Soon An
Official Name
Ong, Soon An
Alternative Name
Ong, Soon An
Ong, S. A.
Soon An, Ong
Soon-An, Ong
ONG, Soon An
Ong, Soon an
Soon-An, Ong
Main Affiliation
Scopus Author ID
57201387782
Researcher ID
B-9255-2012

Research Output

Filters

4
4
3 1
Reset filters

Settings
Now showing 1 - 4 of 4
  • Publication
    Microbial fuel cell operation using monoazo and diazo dyes as terminal electron acceptor for simultaneous decolourisation and bioelectricity generation
    ( 2017-03-05)
    Oon Yoong Sin
    ;
    Ong Soon An
    ;
    Ho Li Ngee
    ;
    Wong Yee Shian
    ;
    Oon Yoong Ling
    ;
    Harvinder Kaur Lehl
    ;
    Thung Wei Eng
    ;
    Noradiba Nordin
    Monoazo and diazo dyes [New coccine (NC), Acid orange 7 (AO7), Reactive red 120 (RR120) and Reactive green 19 (RG19)] were employed as electron acceptors in the abiotic cathode of microbial fuel cell. The electrons and protons generated from microbial organic oxidation at the anode which were utilized for electrochemical azo dye reduction at the cathodic chamber was successfully demonstrated. When NC was employed as the electron acceptor, the chemical oxygen demand (COD) removal and dye decolourisation efficiencies obtained at the anodic and cathodic chamber were 73 Â± 3% and 95.1 Â± 1.1%, respectively. This study demonstrated that the decolourisation rates of monoazo dyes were ∼50% higher than diazo dyes. The maximum power density in relation to NC decolourisation was 20.64 mW/m 2 , corresponding to current density of 120.24 mA/m 2 . The decolourisation rate and power output of different azo dyes were in the order of NC > AO7 > RR120 > RG19. The findings revealed that the structure of dye influenced the decolourisation and power performance of MFC. Azo dye with electron-withdrawing group at para substituent to azo bond would draw electrons from azo bond; hence the azo dye became more electrophilic and more favourable for dye reduction.
  • Publication
    Treatment of O3 with Na2S2O8 by ANOVA Interpretation towards degradation of azo dye
    ( 2018-12)
    Noor Ashikin Mohd Razali
    ;
    Che Zulzikrami Azner Abidin
    ;
    Ong Soon An
    ;
    Fahmi Muhammad Ridwan
    ;
    Abdul Haqi Ibrahim
    ;
    S. N. Sabri
    ;
    S.H. Kow
    ;
    S.A. Malik
    Advanced oxidation processes (AOPs) especially ozonation method is widely studied in the wastewater treatmentfield. In this study, it highlighted about threemainenvironmental issues in the world such as1) proposing a method to overcome uncontrollable effluents from textile industriesby using syntheticdyes; 2)creating an improvementof previous conventional method; 3) reduced process time by using statistical approach.To address with this issue, analysis of variance (ANOVA)from Response Surface Methodology (RSM)to study the performance of O3with the help of persulfate (Na2S2O8) for treating one of azo dyes which is Reactive Green 19.This is due to there isvery limited work done by statistical analysis on this study. Hence, ANOVA data would proposestatistical models tailored to the data in 2D and 3D contour plots by knowing the three influenced parameterswhich is pH(6 to 10),persulfate concentration (30to 70mM) and contact time (4 to 20 min). Through the analysis, the result can be concluded that improvement of ozonation process with persulfate (Na2S2O8) werestatistically significant after allinteractive effectsgave a positive feedback towards responses.The obtained optimum conditions included a persulfate concentration (49mM), initial pH (8.89) and contact time (18 min) with fixed initial concentration 100mg/L. The experimental results were corresponded well with predicted models colour removal rates which is 99%.
      1  19
  • Publication
    Revealing the influences of functional groups in azo dyes on the degradation efficiency and power output in solar photocatalytic fuel cell
    ( 2020-12-01)
    Khalik, Wan Fadhilah
    ;
    Ho Li Ngee
    ;
    Ong Soon An
    ;
    Yusoff N.A.
    ;
    Wong Yee Shian
    ;
    Lee, Sin-Li
    In this study, the degradation efficiency and electricity generation of the azo dyes affected by the functional groups and molecular structure in a solar photocatalytic fuel cell (PFC) system were investigated and discussed in detail. Four different azo dyes such as, Acid Orange 7 (AO7), Acid Red 18 (AR18), Reactive Black 5 (RB5), Reactive Red 120 (RR120) with different molecular structure were evaluated. The degradation efficiency of AO7, AR18, RB5 and RR120 achieved 5.6 ± 0.3%, 11.1 ± 0.6%, 41.9 ± 0.9% and 52.1 ± 1.3%, respectively, after 6 h irradiated under solar light. In addition, the maximum power density, Pmax for AO7, AR18, RB5 and RR120 was 0.0269 ± 0.01, 0.111 ± 0.03, 1.665 ± 0.67 and 4.806 ± 1.79 mW cm−2, respectively. Meanwhile, the concentration of COD for AO7, AR18, RB5 and RR120 reduced to 16 ± 0.1, 10 ± 0.3, 7 ± 0.6 and 3 ± 0.9 mg L−1, respectively. The concentration ratio of benzene / naphthalene, benzene / azo bond and naphthalene / azo bond, respectively, was analyzed to investigate the impact of the functional groups over photodegradation of the azo dyes in PFC. Electron releasing groups (-OH and –NH2) and electron withdrawing groups (-SO3Na) which attached to the naphthalene or benzene ring also played a pivotal role in the degradation mechanism.
      2  25
  • Publication
    Comparison of Different Cathode Materials for Degradation of Reactive Red 120 and Electricity Generation in Photocatalytic Fuel Cell
    ( 2020-10-01)
    Mariaswamy, Alan Jay
    ;
    Ong Soon An
    ;
    Abdul Latif Abdul Rani
    ;
    Ho Li Ngee
    In this study, a photocatalytic fuel cell (PFC) based on immobilized zinc oxide (ZnO) on carbon felt photoanode and activated carbon flakes as cathode was designed for the treatment of azo dye, reactive red 120 (RR120) containing wastewater and simultaneous electricity generation. Under light irradiation, generated electron-hole pairs at the photoanode travel via the external circuit to the cathode, thus generating electricity. This was the first attempt where activated carbon flakes were applied as cathode material in PFC. This study examined the influence of parameters such as light irradiation, cathode material, initial dye concentration, supporting electrolytes, pH and concentration of oxidizing agent and hydrogen peroxide (H2O2) on the efficiency of PFC to degrade azo dye of RR120 while generating electricity. Complete decolourization of up to 50 mg/L of RR120 dye was achieved but increased dye concentration significantly reduced the PFC efficiency. The PFC efficiency improved using an amalgamation of supporting electrolytes, pH and oxidizing agent at optimum levels, achieving total dye removal and producing a maximum power density of 18.58 mW/cm2.
      3  22