Norsuria Mahmed
Thumbnail Image
Preferred name
Norsuria Mahmed
Official Name
Norsuria, Mahmed
Alternative Name
Mahmed, Norsuria
Mahmed, N.
Norsuria, Mahmed
Norsuria, M.
Main Affiliation
Scopus Author ID
24802694300
Researcher ID
FOC-8505-2022

Research Output

Filters

10 2
Reset filters

Settings
Now showing 1 - 10 of 10
  • Publication
    Mesoporous Structure of Doped and Undoped PEG on Ag/TiO2 Thin Film
    ( 2019-08-14)
    Abdul Razak K.
    ;
    Dewi Suriyani Che Halin
    ;
    Azani A.
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Norsuria Mahmed
    ;
    Muhammad Mahyiddin Ramli
    ;
    Sepeai S.
    In this reaserch, photocatalyst silver titanium dioxide was doped and modified by Polyethylene Glycol (PEG). The purpose of the present study was to analyse the synthesized Ag/TiO2 thin film doped and undoped PEG. Ag/TiO2 thin films on silicon wafer have been prepared by sol-gel spin coating. The samples were characterized by Grazing Incidence X-ray diffraction (GIXRD), Field Emission Scanning Electron Microscopy (FESEM) and Atomic Force Microscope (AFM). The doped and undoped PEG Ag/TiO2 thin films showed a mesoporous TiO2 matrix which includes TiO2 crystallites of 10-20 nm in size and small Ag nanoparticles (white spots) with various sizes ranging from 10 to 30 nm. However, doped PEG Ag/TiO2 thin film showed the Ag nanoparticles became agglomerates but still remained roughly uniform on the surface.
  • Publication
    Synthesis Methods of Tin Oxide as Photoanode for Dye-Sensitized Solar Cell Performance: A Short Review
    ( 2021-12-01)
    Idris S.N.
    ;
    Mohd Natashah Norizan
    ;
    Ili Salwani Mohamad
    ;
    Norsuria Mahmed
    ;
    Magiswaran K.
    ;
    Sobri S.A.
    This review focused on the synthesis methods of tin oxide (SnO2) nanoparticles as a photoanode for dye-sensitized solar cell (DSSC) and how it impacts the performance. There are many different techniques and various nanoparticles were produced and usually characterized by X-ray diffraction (XRD) to determine crystalline structure of SnO2, scanning electron microscopy (SEM) to examine the surface morphology and size details and J-V solar simulator to verify current-voltage characteristics. In summary, considering all the methods reviewed, sol-gel is reported as the best method to produce SnO2 nanoparticles for DSSC fabrication with the highest efficiency recorded of 3.96%.
  • Publication
    Effect of graphene oxide on microstructure and optical properties of TiO2 thin film
    ( 2019-01-01)
    Azani A.
    ;
    Dewi Suriyani Che Halin
    ;
    Razak K.A.
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Mohd Salleh M.A.A.
    ;
    Abdul Razak M.F.S.
    ;
    Norsuria Mahmed
    ;
    Ramli M.M.
    ;
    Ayu Wazira Azhari
    ;
    Chobpattana V.
    GO/TiO2 thin films have been synthesized from titanium (IV) isopropoxide (TTIP) by a sol-gel method. The films were deposited onto a glass substrate using spin coating deposition technique then were subjected to annealed process at 350 °C. The different amount of graphene oxide (GO) was added into the parent solution of sol in order to investigate the microstructure, topography, optical band gap and photocatalytic activity of the thin films. The prepared thin films were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), UV-VIS spectrophotometry and degradation of methylene blue (MB). AFM images reveal a rougher surface of GO/TiO2 thin film than bare TiO2 thin film due to GO particles. Moreover, the SEM images showed the formation of semispherical microstructure of bare TiO2 changes to some larger combined molecules with GO addition. The UV-Vis spectrophotometer results show that with optical direct energy gap decreases from 3.30 to 3.18 eV after GO addition due to the effect of high surface roughness and bigger grain size. Furthermore, the optical results also indicated that GO improved the optical properties of TiO2 in the visible range region.
  • Publication
    Electrical Performance of Curcuma longa Extract Dye using SnO2-Based Photoanode Dye-Sensitized Solar Cell
    ( 2022-12-01)
    Siti Norhafizah Idris
    ;
    Ili Salwani Mohamad
    ;
    Norsuria Mahmed
    ;
    Mohd Natashah Norizan
    ;
    Magiswaran K.
    ;
    Abas Z.A.
    Due to their low output costs, straightforward manufacturing, and high effectiveness, dye-sensitized solar cell (DSSC) has a large following interest in the solar energy industry. Furthermore, due to its outstanding properties, tin oxide (SnO2) is an appealing semiconducting material suitable as a photoanode in DSSCs. In this research, the photoelectrodes of DSSC were fabricated using commercial SnO2 nanoparticles and sensitized with inorganic and organic dyes, N719 and Curcuma longa (turmeric) extract dye. On top of that, a platinum (Pt) counter electrode, iodide electrolyte and fluorine-doped tin oxide (FTO) coated glass substrate were used to fabricate the DSSC. The crystallographic structure and surface morphology of the SnO2 nanopowder were identified using X-ray diffraction (XRD) and scanning electron microscopy (SEM) characterizations respectively. In addition, UV-Visible and current density-voltage curves were used to analyze the optical properties of the photoanodes and the cell’s electrical performance. As a result, it was found that the DSSC fabricated with N719 dye exhibited higher efficiency in contrast with the turmeric extract dye with SnO2 photoanodes.
      1
  • Publication
    Effect of polyethylene glycol and sodium dodecyl sulphate on microstructure and self-cleaning properties of graphene oxide/TiO2 thin film
    ( 2020-09-01)
    Azani A.
    ;
    Dewi Suriyani Che Halin
    ;
    Kamrosni Abdul Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Norsuria Mahmed
    ;
    Muhammad Mahyiddin Ramli
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Mohd Fairul Sharin Abdul Razak
    ;
    Ayu Wazira Azhari
    ;
    Chobpattana V.
    ;
    Kaczmarek L.
    In this study, a sol gel procedure for preparation of TiO2 thin films with graphene oxide (GO) was developed. The effect of PEG and SDS addition on the microstructure of the films as well as the photocatalytic activity of the thin film was also investigated. The morphology and surface structure of the films were studied by SEM and AFM while the photocatalytic activity of the films was analyzed by measuring the degradation of methylene blue under sunlight irradiation using UV-Vis spectrophotometer. It was found that GO/TiO2 thin film with PEG shows a smaller and porous particle while GO/TiO2 thin film with SDS formed a very smooth surface and very fine particles. Therefore, in AFM analysis reveals that surface roughness decreases with the addition of PEG and SDS. Finally, the photocatalytic activity showed that GO/TiO2 thin film with SDS have the most effective self-cleaning property which degrade 64% of methylene blue that act as model of contaminants.
      1
  • Publication
    The Effect of Spinacia oleracea Dye Absorption Time on ZnO-based Dye-Sensitized Solar Cells’ Electrical Performance
    ( 2022-12-01)
    Magiswaran K.
    ;
    Ili Salwani Mohamad
    ;
    Norsuria Mahmed
    ;
    Mohd Natashah Norizan
    ;
    Idris S.N.
    ;
    Abas Z.A.
    Dye-sensitized solar cells (DSSC) have attracted much attention over the past 20 years due to their significance in energy conversion. However, the dye soaking time may significantly impact the efficacy of the photoanode semiconductor to carry the electronic charge to which the dye molecules adhere. An optimized dye soaking time may prevent the recombination of photo-excited electrons that are injected into the semiconductor of the DSSC. This study scrutinized the dependence of the zinc oxide (ZnO) photoanode soaking time of Spinacia oleracea (spinach) dye on the photocurrent-voltage characteristics. The ZnO film layer (photoanode) was prepared with commercial ZnO nanopowder and applied onto a fluorine-doped tin oxide (FTO) glass substrate using the doctor blade method. The prepared DSSCs’ were subjected to a variety of characterizations, including current density-voltage (J-V) characterization, UV-visible characterization, scanning electron microscope (SEM), and X-ray diffraction (XRD). Comparing four variations of dye soaking time, ZnO-based DSSC photoanode soaked in the dye for an hour achieved an optimum efficiency of 0.03 %. This study proved that the efficiency of a DSSC can be improved by optimizing the dye soaking time.
      1
  • Publication
    Self-cleaning property of ag/tio2 thin film
    ( 2020-01-01)
    Kamrosni Abdul Razak
    ;
    Dewi Suriyani Che Halin
    ;
    Azliza Azani
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Norsuria Mahmed
    ;
    Chobpattana V.
    Ag/TiO2 thin film was prepared by the sol-gel method through the hydrolysis of titanium tetraisopropoxide and silver nitrate solution. Spin coating method was used to get uniform film on ITO glass substrate followed by annealing process for 1 hour. After that, all the samples were characterised using GIXRD and FESEM and undergone water contact angle test and MB degradation. Silver ion concentrations were varied to observe the effect on crystalline state, morphology, wettability and photocatalytic properties. The results showed that Ag/TiO2 thin film was in anatase phase and it could degrade nearly 70% of methylene blue after 150 min illumination. The formed Ag/TiO2 thin film has excellent self-cleaning property with compact, continuous, smooth, and good hydrophilicity property.
      2
  • Publication
    Factors of Controlling the Formation of Titanium Dioxide (TiO2) Synthesized using Sol-gel Method - A Short Review
    ( 2022-01-24)
    Kamrosni Abdul Razak
    ;
    Dewi Suriyani Che Halin
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Norsuria Mahmed
    ;
    Azliza Azani
    ;
    Chobpattana V.
    There have been experiments on TiO2 thin films synthesized utilizing sol-gel techniques. The sol-gel method is a straightforward technology that gives numerous benefits to the researcher, for instance, material's reliability, reproducibility, and controllability. Following from there, it can be utilized to make high-quality nano-structured thin films. According to previous studies, the TiO2 films' characteristics occur to be highly dependent on the production parameters and initial materials utilized. Controlling the formation of TiO2 thin films with the sol-gel method was momentarily discussed here.
      1
  • Publication
    Magnetic-Based Coreshell Nanoparticles as Potential Adsorbents for the Removal of Cu2+ under Ultraviolet (UV) Light
    ( 2021-11-12)
    Husni H.N.
    ;
    Norsuria Mahmed
    ;
    Ge Y.
    ;
    Mohd Natashah Norizan
    ;
    Dewi Suriyani Che Halin
    ;
    Kamrosni Abdul Razak
    ;
    Ili Salwani Mohamad
    The magnetite (Fe3O4) and maghemite (gFe2O3) nanoparticles, magnetite-silica-silver chloride (Fe3O4-SiO2-AgCl) and maghemite-silica-silver chloride (gFe2O3-SiO2-AgCl) coreshell structures have successfully been synthesized by using a simple wet chemistry method. The efficiency of these particles as the adsorbents for the removal of copper ion, Cu2+ in aqueous solution under UV light was investigated. Two different parameters were studied, namely the adsorbents contact time (60, 120, 180, 240 and 300s) and the solution-stirring rate (100, 200 and 300 rpm). From the results, the removal percentage of the copper ions from the solution were above 90% after 5 hours of adsorption process at 300 rpm by using Fe3O4 (94%) and gFe2O3 (92%) nanoparticles. The maximum removal of copper ions was nearly 100% when gFe2O3-SiO2-AgCl & Fe3O4-SiO2-AgCl coreshell particles were used. The samples that were prepared without magnetic core such as AgCl-SiO2, AgCl and SiO2 particles, showed lower percentage of the copper ions removal (78%, 60% and 20%, respectively). This situation shows that the magnetic nanoparticles plays and important role during the adsorption process due to their large active sites for the adsorption to occur.
      2
  • Publication
    Microstructural studies of ag/tio2 thin film; effect of annealing temperature
    ( 2022-01-01)
    Kamrosni A.R.
    ;
    Dewi Suriyani Che Halin
    ;
    Azliza A.
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Norsuria Mahmed
    ;
    Chobpattana V.
    ;
    Kaczmarek L.
    ;
    Jez B.
    ;
    Nabialek M.
    Microstructures are an important link between materials processing and performance, and microstructure control is essential for any materials processing route where the microstructure plays a major role in determining the properties. In this work, silverdoped titanium dioxide (Ag/TiO2) thin film was prepared by the sol-gel method through the hydrolysis of titanium tetra-isopropoxide and silver nitrate solution. The sol was spin coated on ITO glass substrate to get uniform film followed by annealing process for 2 hours. The obtained films were annealed at different annealing temperatures in the range of 300°C-600°C in order to observe the effect on crystalline state, microstructures and optical properties of Ag/TiO2thin film. The thin films were characterized by X-Ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis spectrophotometry. It is clearly seen, when the annealing temperature increases to 500°C, a peak at 2θ = 25.30° can be seen which refers to the structure of TiO2tetragonal anatase. The structure of Ag/TiO2thin film become denser, linked together, porous and uniformly distributed on the surface and displays the highest cut-off wavelength value which is 396 nm with the lowest band gap value, which is 3.10 eV.
      1