Mohd Khairuddin Md Arshad
Thumbnail Image
Preferred name
Mohd Khairuddin Md Arshad
Official Name
Mohd Khairuddin , Md Arshad
Alternative Name
Md. Arshad, M. K.
Arshad, Mohd K.M.
Arshad, M. K.M.
Khairuddin Md Arshad, Mohd
Arshad, M. K.Md
Main Affiliation
Scopus Author ID
57211870224
Researcher ID
L-5830-2013

Research Output

Filters
Reset filters

Settings
Now showing 1 - 10 of 16
  • Publication
    Impact of buried oxide thickness in substrate-gate integrated silicon nanowire field-effect transistor biosensor performance for charge sensing
    ( 2021-07-21)
    Tan Y.M.
    ;
    Mohamad Faris Mohamad Fathil
    ;
    Mohammad Nuzaihan Md Nor
    ;
    Norhayati Sabani
    ;
    Teoh X.Y.
    ;
    Mohd Khairuddin Md Arshad
    ;
    Subash Chandra Bose Gopinath
    ;
    Rahman S.F.A.
    ;
    Uda Hashim
    The paper investigated on performance in charge sensing for substrate-gate integrated silicon nanowire field-effect transistor biosensor at different thickness of the buried oxide layer, sandwiched in between the top-silicon and substrate layers. The device structures with different buried oxide thickness ranging from 100 to 200 nm were designed and simulated using the Silvaco ATLAS device simulation software. The increase of buried oxide thickness reduced the strength of induced electric field that contributes to the formation of inversion layer for current flow through the silicon nanowire channel, hence contributed to the increase in threshold voltage. For simulation of charge sensing, the device demonstrated the ability to identify different interface charge values ranging from -5×1010 to -9×1010 e· cm-2 applied on the surface of the silicon nanowire channel to represent target charge biomolecules that bound to the biosensor in actual detection. Significant change in threshold voltage can be observed due to the applied interface charge density values and was evaluated to determine the sensitivity for charge sensing performance. The device shows better performance when designed with buried oxide thickness of 200 nm at sensitivity of 1.151 V/e· cm-2.
  • Publication
    Femtomolar Dengue Virus Type-2 DNA Detection in Back-gated Silicon Nanowire Field-effect Transistor Biosensor
    ( 2022-01-01)
    Abidin W.A.B.Z.
    ;
    Nor M.N.M.
    ;
    Mohd Khairuddin Md Arshad
    ;
    Mohamad Faris Mohamad Fathil
    ;
    Nor Azizah Parmin
    ;
    Sisin N.A.H.T.
    ;
    Ibau C.
    ;
    Azlan A.S.
    Background: Dengue is known as the most severe arboviral infection in the world spread by Aedes aegypti. However, conventional and laboratory-based enzyme-linked immunosorbent as-says (ELISA) are the current approaches in detecting dengue virus (DENV), requiring skilled and well-trained personnel to operate. Therefore, the ultrasensitive and label-free technique of the Silicon Nanowire (SiNW) biosensor was chosen for rapid detection of DENV. Methods: In this study, a SiNW field-effect transistor (FET) biosensor integrated with a back-gate of the low-doped p-type Silicon-on-insulator (SOI) wafer was fabricated through conventional photo-lithography and Inductively Coupled Plasma – Reactive Ion Etching (ICP-RIE) for Dengue Virus type-2 (DENV-2) DNA detection. The morphological characteristics of back-gated SiNW-FET were examined using a field-emission scanning electron microscope supported by the elemental analysis via energy-dispersive X-ray spectroscopy. Results and Discussion: A complementary (target) single-stranded deoxyribonucleic acid (ssDNA) was recognized when the target DNA was hybridized with the probe DNA attached to SiNW surfaces. Based on the slope of the linear regression curve, the back-gated SiNW-FET biosensor demonstrated the sensitivity of 3.3 nAM-1 with a detection limit of 10 fM. Furthermore, the drain and back-gate voltages were also found to influence the SiNW conductance changed. Conclusion: Thus, the results obtained suggest that the back-gated SiNW-FET shows good stability in both biosensing applications and medical diagnosis throughout the conventional photolithography method.
  • Publication
    Impedimetric Lectin Biosensor for Prostate Cancer Detection
    ( 2021-01-01)
    Abd Rahman S.F.
    ;
    Mohd Khairuddin Md Arshad
    ;
    Subash Chandra Bose Gopinath
    ;
    Mohamad Faris Mohamad Fathil
    ;
    Sarry F.
    ;
    Md Nor M.N.
    There is considerable attention on the determination of prostate-specific antigen (PSA) glycosylation patterns for the early detection of prostate cancer, as it is one of the most reliable tumor biomarkers. In this study, the highly effective lectin-based biosensor utilizing gold interdigitated microelectrode was developed as a sensing transducer, coupled with electrochemical impedance spectroscopy (EIS) for the sensitive detection of biomolecules event on the device. The self-assembled monolayer using 11-mercaptoundecanoic acid was utilized to modify the sensor surface for the conjugation of Maackia amurensis lectin as biorecognition elements. The analytical analysis of the developed lectin biosensor with PSA glycosylation through impedimetric measurement exhibited a linear detection ranging from 100 pg/mL to 100 ng/mL and attained a detection limit of 27.6 pg/mL.
  • Publication
    Lectin bioreceptor approach in capacitive biosensor for prostate-specific membrane antigen detection in diagnosing prostate cancer
    ( 2021-03-01)
    Subramani I.G.
    ;
    Ramzan Mat Ayub
    ;
    Subash Chandra Bose Gopinath
    ;
    Perumal V.
    ;
    Mohamad Faris Mohamad Fathil
    ;
    Mohd Khairuddin Md Arshad
    This research reports a new approach with lectin-based capacitive non-faradaic biosensor for the detection of prostate-specific membrane antigen (PSMA) as a promising diagnostic marker for determining prostate cancer. PSMA expression is significantly higher in malign hyperplasia, thus can be effectively employed to discriminate other benign prostatic diseases. Herein, the aluminium interdigitated electrode was fabricated and modified by a linker, 2-mercaptoacetate to form the self-assembled monolayer. Gold nanoparticles were used as a signal amplifier and supported the conjugation of Concanavalin A, for efficient capacitive sensing of PSMA. Scanning electron microscope observation effectively captured the surface modification on the aluminium surface by revealing the specific adherence of gold nanoparticles with Concanavalin A. Moreover, the successful surface modification was further validated by atomic force microscopy, Fourier transforms infrared spectroscopy, and X-ray photoelectron spectroscopy. The interaction analysis of Concanavalin A with PSMA by capacitive non-faradaic measurement exhibited a linear detection range from 10 pM to 100 nM and attained the detection limit and sensitivity of 10 pM and 1.65 nF/pM respectively as the comparable performance to the current sensing strategies. Furthermore, the fabrication and quantification of PSMA as demonstrated here are relatively simple and can be employed for the straightforward detection of other biomarkers.
  • Publication
    Formation of polypropylene nanocomposite joint using silicon carbide nanowhiskers as novel susceptor for microwave welding
    ( 2023-05-01)
    Foong P.Y.
    ;
    Voon Chun Hong
    ;
    Lim B.Y.
    ;
    Teh P.L.
    ;
    Mohd Afendi Rojan
    ;
    Subash Chandra Bose Gopinath
    ;
    Mohd Khairuddin Md Arshad
    ;
    Nor Azizah Parmin
    ;
    Low F.W.
    ;
    Ruslinda A. Rahim
    ;
    Uda Hashim
    Up to present, no study has reported on the use of silicon carbide nanomaterials (SiCNMs) as susceptor for microwave welding of thermoplastics. Therefore, in this study, silicon carbide nanowhiskers (SiCNWs) was attempted as the microwave susceptor for the microwave welding of polypropylene (PP). It was observed that SiCNWs are capable of absorbing microwave and converting them into heat, leading to a sharp increase in temperature until it reaches the melting point of PP substrates. The microwave welded joint is formed after the molten PP at the interface between PP substrates is cooled under pressure. The effect of microwave heating duration and solid loading of SiCNWs suspension was studied and reported. The formation mechanism of SiCNWs reinforced PP welded joint was proposed in this study. With these remarkable advantages of microwave welding and enhanced mechanical properties of the welded joint, it is believed that this study can provide a new insight into welding of thermoplastic and material processing through short-term microwave heating.
      26  1
  • Publication
    Impedimetric cardiac biomarker determination in serum mediated by epoxy and hydroxyl of reduced graphene oxide on gold array microelectrodes
    ( 2021-08-01)
    Steven Taniselass
    ;
    Mohd Khairuddin Md Arshad
    ;
    Subash Chandra Bose Gopinath
    ;
    Mohamad Faris Mohamad Fathil
    ;
    Ibau C.
    ;
    Anbu P.
    A label-free chemical bonding strategy mediated by reduced graphene oxide (rGO) basal plane functional groups has been developed for cardiac Troponin I (cTnI) detection. Four different chemical strategies on respective electrode sensing surface were precedingly examined using electrochemical impedance spectroscopy. The impedimetric assessment was carried out by sweeping frequency at the range 0.1–500 kHz perturbated at a small amplitude of AC voltage (25 mV). The chemical strategy-4 denoted as S-4 shows a significant analytical performance on cTnI detection in spiked buffer and human serum, whereby the pre-mixture of rGO and (3-Aminopropyl)triethoxysilane (APTES) creates a large number of amine sites (−NH2), which significantly enhanced the antibody immobilization without excessive functionalization. The as-fabricated immunosensor exhibited an ultra-low limit of detection of 6.3 ag mL−1 and the lowest antigen concentration measured was at 10 ag mL−1. The immunosensor showed a linear and wide range of cTnI detection (10 ag mL−1–100 ng mL−1) in human serum with a regression coefficient of 0.9716, rapid detection (5 min of binding time), and stable and highly reproducible bioelectrode response with RSD < 5%. Hence, the demonstrated S-4 strategy is highly recommended for other downstream biosensors applications. Graphical abstract: [Figure not available: see fulltext.].
      3  33
  • Publication
    Molybdenum disulfide—gold nanoparticle nanocomposite in field-effect transistor back-gate for enhanced C-reactive protein detection
    ( 2020-11-01)
    Dalila N.R.
    ;
    Mohd Khairuddin Md Arshad
    ;
    Subash Chandra Bose Gopinath
    ;
    Mohammad Nuzaihan Md Nor
    ;
    Mohamad Faris Mohamad Fathil
    Nanofabricated gold nanoparticles (Au-NPs) on MoS2 nanosheets (Au-NPs/MoS2) in back-gated field-effect transistor (BG-FET) are presented, which acts as an efficient semiconductor device for detecting a low concentration of C-reactive protein (C-RP). The decorated nanomaterials lead to an enhanced electron conduction layer on a 100-μm-sized transducing channel. The sensing surface was characterized by Raman spectroscopy, ultraviolet–visible spectroscopy (UV-Vis), atomic force microscopy (AFM), scanning electron microscopy (SEM), and high-power microscopy (HPM). The BG-FET device exhibits an excellent limit of detection of 8.38 fg/mL and a sensitivity of 176 nA/g·mL−1. The current study with Au-NPs/MoS2 BG-FET displays a new potential biosensing technology; especially for integration into complementary metal oxide (CMOS) technology for hand-held future device application. [Figure not available: see fulltext.]
      5  30
  • Publication
    Silicon Self-Switching Diode (SSD) as a Full-Wave Bridge Rectifier in 5G Networks Frequencies
    ( 2022-12-01)
    Yi Liang T.
    ;
    Nor Farhani Zakaria
    ;
    Shahrir Rizal Kasjoo
    ;
    Safizan Shaari
    ;
    Muammar Mohamad Isa
    ;
    Mohd Khairuddin Md Arshad
    ;
    Singh A.K.
    The rapid growth of wireless technology has improved the network’s technology from 4G to 5G, with sub-6 GHz being the centre of attention as the primary communication spectrum band. To effectively benefit this exclusive network, the improvement in the mm-wave detection of this range is crucial. In this work, a silicon self-switching device (SSD) based full-wave bridge rectifier was proposed as a candidate for a usable RF-DC converter in this frequency range. SSD has a similar operation to a conventional pn junction diode, but with advantages in fabrication simplicity where it does not require doping and junctions. The optimized structure of the SSD was cascaded and arranged to create a functional full-wave bridge rectifier with a quadratic relationship between the input voltage and outputs current. AC transient analysis and theoretical calculation performed on the full-wave rectifier shows an estimated cut-off frequency at ~12 GHz, with calculated responsivity and noise equivalent power of 1956.72 V/W and 2.3753 pW/Hz1/2, respectively. These results show the capability of silicon SSD to function as a full-wave bridge rectifier and is a potential candidate for RF-DC conversion in the targeted 5G frequency band and can be exploited for future energy harvesting application.
      47  3
  • Publication
    Design and fabrication of PDMS microfluidics device for rapid and label-free DNA detection
    ( 2020-03-01)
    Ayoib A.
    ;
    Uda Hashim
    ;
    Subash Chandra Bose Gopinath
    ;
    Thivina V.
    ;
    Mohd Khairuddin Md Arshad
    Microfluidics explores the manipulation of fluid in small volume, a multidisciplinary field is imperative for DNA extraction. This study offers a simple yet substantial methodology for the fabrication of microfluidics structure-based polydimethylsiloxane (PDMS) biopolymer on a glass substrate with SU-8 photoresist for label-free detection of pathogenic genomic DNA. Two microfluidics designs for DNA detection were based on AutoCAD software, both contain two inlets and one outlet, with dimensions of 28 mm wide, and 18 mm long, and total surface area of 504 mm2. The designs were patterned in such particular sizes and dimensions to test fluid delivery and enhancement in biochemical processes in DNA extraction, while maintaining economical values as a disposable chip. Both microfluidics devices showed no leakage during fluid delivery, have heights of 97.97 and 103.44 Î¼m, and surface roughness of 0.15 and 0.07 Î¼m, respectively. DNA extraction from pathogenic fungus Ganoderma boninense was run on PDMS microfluidic device and UV–Vis analysis confirmed successful extraction with peaks found at 260–280 nm. Current–voltage (I–V) measurement confirmed the accuracy of microfluidic device for the specific pathogen with both real and synthetic samples of G. boninense illustrating the similar graph values of only 0.000005 A difference at 1.0 V after hybridization.
      1  15
  • Publication
    Hybrid Statistical and Numerical Analysis in Structural Optimization of Silicon-Based RF Detector in 5G Network
    ( 2022-02-01)
    Yi Liang T.
    ;
    Nor Farhani Zakaria
    ;
    Shahrir Rizal Kasjoo
    ;
    Safizan Shaari
    ;
    Muammar Mohamad Isa
    ;
    Mohd Khairuddin Md Arshad
    ;
    Singh A.K.
    ;
    Sobri S.A.
    In this study, a hybrid statistical analysis (Taguchi method supported by analysis of variance (ANOVA) and regression analysis) and numerical analysis (utilizing a Silvaco device simulator) was implemented to optimize the structural parameters of silicon-on-insulator (SOI)-based self-switching diodes (SSDs) to achieve a high responsivity value as a radio frequency (RF) detector. Statistical calculation was applied to study the relationship between the control factors and the output performance of an RF detector in terms of the peak curvature coefficient value and its corresponding bias voltage. Subsequently, a series of numerical simulations were performed based on Taguchi’s experimental design. The optimization results indicated an optimized curvature coefficient and voltage peak of 26.4260 V−1 and 0.05 V, respectively. The alternating current transient analysis from 3 to 10 GHz showed the highest mean current at 5 GHz and a cut-off frequency of approximately 6.50 GHz, indicating a prominent ability to function as an RF detector at 5G related frequencies.
      4  52