Khor Shing Fhan
Thumbnail Image
Preferred name
Khor Shing Fhan
Official Name
Shing Fhan, Khor
Alternative Name
Khor, S. F.
Fhan, Khor Shing
Shing, Fhan Khor
Khor, Shing F.
Shing Fhan, Khor
Main Affiliation
Scopus Author ID
35242874900
Researcher ID
W-7216-2019

Research Output

Filters
14
Reset filters

Settings
Now showing 1 - 10 of 14
  • Publication
    Morphological and optical properties of porous hydroxyapatite/cornstarch (HAp/Cs) composites
    ( 2020-01-01)
    Beh C.Y.
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Tarmizi E.Z.
    ;
    Eng S.K.
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Khor Shing Fhan
    ;
    Ahmad Saad F.S.
    This paper presents the correlation between the morphological characteristics and the diffuse reflectance (optical properties) of the porous hydroxyapatite/cornstarch (HAp/Cs) composites with various starch proportions (30, 40, 50, 60, 70, 80 and 90 wt%). The porous composites were measured via SEM and enhanced by image processing to find the average pore size, strut width, and average surface roughness. The average porosity of the porous composites was measured using liquid displacement method. The diffuse reflectance spectroscopy was implemented to investigate the diffuse reflectance and the corresponding optical band gap energy of the porous composites in the 500e900 nm range. A relationship between morphological characteristics and diffuse reflectance properties were established using Pearson's correlation coefficient. The findings of the study depict that a strong correlation can be noticed between optical band gap energy with porosity, pore sizes and surface roughness of the porous composites. Meanwhile, the strong correlations between the diffuse reflectance spectral gradient with surface roughness can be observed. The moderate correlations can be observed between the diffuse reflectance spectral gradient with pore sizes and strut width of the porous composites.
      2
  • Publication
    Complex Impedance and Modulus Analysis on Porous and Non-Porous Scaffold Composites Due to Effect of Hydroxyapatite/Starch Proportion
    ( 2023-01-01)
    Beh C.Y.
    ;
    Cheng Ee Meng
    ;
    Tan X.J.
    ;
    Mohd Nasir N.F.
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Khor Shing Fhan
    ;
    Lee K.Y.
    ;
    Che Wan Sharifah Robiah Mohamad
    This study aims to investigate the electric responses (complex modulus and complex impedance analysis) of hydroxyapatite/starch bone scaffold as a function of hydroxyapatite/starch proportion and the microstructural features. Hence, the non-porous and porous hydroxyapatite/starch composites were fabricated with various hydroxyapatite/starch proportions (70/30, 60/40, 50/50, 40/60, 30/70, 20/80, and 10/90 wt/wt%). Microstructural analysis of the porous hydroxyapatite/starch composites was carried out by using scanning electron microscopy. It shows that the formation of hierarchical porous microstructures with high porosity is more significant at a high starch proportion. The complex modulus and complex impedance analysis were conducted to investigate the electrical conduction mechanism of the hydroxyapatite/starch composites via dielectric spectroscopy within a frequency range from 5 MHz to 12 GHz. The electrical responses of the hydroxyapatite/starch composites are highly dependent on the frequency, material proportion, and microstructures. High starch proportion and highly porous hierarchical microstructures enhance the electrical responses of the hydroxyapatite/starch composite. The material proportion and microstructure features of the hydroxyapatite/starch composites can be indirectly reflected by the simulated electrical parameters of the equivalent electrical circuit models.
      4
  • Publication
    Low frequency dielectric and optical behavior on physicochemical properties of hydroxyapatite/cornstarch composite
    ( 2021-10-15)
    Beh C.Y.
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Khor Shing Fhan
    ;
    Eng S.K.
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Lee K.Y.
    An investigation on relationship among the physicochemical, optical and dielectric properties of the hydroxyapatite/cornstarch (HA/Cs) composites with the starch proportion of 30, 40, 50, 60, 70, 80 and 90 wt% is presented in this work. The HA/Cs composites have been characterized via FTIR, XRD, DRS and impedance analyzer. This work depicts that the strong interaction is exhibited between the hydroxyapatite nanoparticles and starch as the starch proportion increases. This increment trend results in the higher crystallinity of the HA/Cs composites. The highly crystallized HA/Cs with hydroxyapatite nucleation center presents low optical properties (diffuse reflectance and optical band gap energy). The HA/Cs composite with 80 wt% starch proportion (H2C8) show higher dielectric properties (dielectric constant, loss factor and conductivity) due to the stronger interfacial interaction and close-packed HA/Cs crystalline structure. The relationship among the physicochemical, optical and dielectric properties of the HA/Cs composite is studied in this work for potential of instrumentation design.
      2  1
  • Publication
    Regression Analysis of the Dielectric and Morphological Properties for Porous Nanohydroxyapatite/Starch Composites: A Correlative Study
    ( 2022-05-01)
    Beh C.Y.
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Tarmizi E.Z.
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Lee K.Y.
    ;
    Khor Shing Fhan
    This paper aims to investigate the dielectric properties, i.e., dielectric constant (ε′), dielectric loss factor (ε″), dielectric tangent loss (tan δ), electrical conductivity (σ), and penetration depth (Dp), of the porous nanohydroxyapatite/starch composites in the function of starch proportion, pore size, and porosity over a broad band frequency range of 5 MHz–12 GHz. The porous nanohydroxyapatite/starch composites were fabricated using different starch proportions ranging from 30 to 90 wt%. The results reveal that the dielectric properties and the microstructural features of the porous nanohydroxyapatite/starch composites can be enhanced by the increment in the starch proportion. Nevertheless, the composite with 80 wt% of starch proportion exhibit low dielectric properties (ε′, ε″, tan δ, and σ) and a high penetration depth because of its highly interconnected porous microstructures. The dielectric properties of the porous nanohydroxyapatite/starch composites are highly dependent on starch proportion, average pore size, and porosity. The regression models are developed to express the dielectric properties of the porous nanohydroxyapatite/starch composites (R2 > 0.96) in the function of starch proportion, pore size, and porosity from 1 to 11 GHz. This dielectric study can facilitate the assessment of bone scaffold design in bone tissue engineering applications.
      1  18
  • Publication
    Dielectric Properties of Hydrothermally Modified Potato, Corn, and Rice Starch
    ( 2022-06-01)
    Beh C.Y.
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Tarmizi E.Z.
    ;
    Khor Shing Fhan
    ;
    Mohd Shukry Abdul Majid
    ;
    Lee K.Y.
    ;
    Mohd Ridzuan Mohd Jamir
    The effect of starch granule sizes, shapes, composition, and frequency on the dielectric properties (dielectric constant, loss factor, and conductivity) of native and hydrothermally modified starches (potato, corn, and rice starch) are investigated in this work. Dielectric properties are determined from 5 Hz to 5 GHz. The modified starches exhibit lower dielectric properties than the native starches from 5 Hz to 5 GHz due to the disruption of the native polysaccharide’s molecular arrangement. The modified potato starch shows the highest loss factor (208.12 at 50 Hz and 19.95 at 500 Hz) and stable conductivity (~5.33 × 10−7 S/m at 50 Hz and 500 Hz) due to the larger continuous network structure after hydrothermal modification. The rice starch shows the largest difference in dielectric constant (47.30%) and loss factor (71.42%) between the modified form and native form in the frequency range of 5 MHz–5 GHz. This is due to the restriction of dipole motions in the closely packed structure after hydrothermal modification. The findings indicate that the quality of starch modification can be characterized by dielectric properties for assisting starch-based plastic production’s design.
      2
  • Publication
    Dielectric, Electrical Conductivity, and Thermal Stability Studies of Cellulosic Fibers Reinforced Polylactic Acid Composites
    ( 2022-01-01)
    Azahari A.N.
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Mohd Shukry Abdul Majid
    ;
    Maslinda Abu Bakar @ Yahaya
    ;
    Cheng Ee Meng
    ;
    Khor Shing Fhan
    ;
    Rahman M.T.A.
    ;
    Sulaiman M.H.
    In this study, biodegradable polylactic acid (PLA) composites were reinforced with three different natural fibers, were bamboo (BF), sugarcane (SF), and banana pseudostem (BPF) fibers, and prepared at different loadings (10, 20, and 30 wt.%). The solvent casting particulate leaching method was implemented to produce porous composites, and salt was used as the particulate material. The dielectric properties of the PLA/BF, PLA/SF, and PLA/BF composites were studied for different loadings of cellulosic fibers. The composites were observed using scanning electron microscopy (SEM), and the PLA composites with 30 wt.% filler content were analyzed using Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA). According to the dielectric tests, all PLA/BF, PLA/SF, and PLA/BPF composites have low dielectric constants and dielectric loss. The PLA/BF composites exhibited the highest dielectric constant, dielectric loss, and electrical conductivity, followed by the PLA/BF and PLA/SF composites. The morphology of the composites showed their porous structure. The FTIR spectra showed the main constituents presented in the composites, and the PLA/BF showed higher thermal stability than the other composites.
      2  29
  • Publication
    Microwave dielectric analysis on adhesive disbond in acrylic glass (Poly (Methyl Methacrylate)) at KU-band
    ( 2020-10-01)
    Cheng Ee Meng
    ;
    Mohd Afendi Rojan
    ;
    Shahriman Abu Bakar
    ;
    Zuradzman Mohamad Razlan
    ;
    You K.Y.
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Khairul Salleh Basaruddin
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Beh C.Y.
    ;
    Khor Shing Fhan
    A microwave dielectric spectroscopy for detecting adhesive disbonds between acrylic glass (aka Poly (methyl methacrylate)) was discussed. The adhesive bond was developed using epoxy resin and acrylate. The level of joint disbond can be quantified using Young Modulus. In this work, the strength of bond is affected by radius of air void within adhesive bond. A high-frequency electromagnetic wave propagated through two joint acrylic glass with acrylate and epoxy adhesive using waveguide adaptor WR90 in conjunction with professional network analyser. This electromagnetic wave is reflected and transmitted at the bond interface due to mismatch impedance at adhesive bond. The output is a dielectric properties that characterizes the bond interface. The increment of Young Modulus leads to increment of dielectric constant and loss factor for epoxy resin and acrylates, respectively.
      7  37
  • Publication
    Lumped-Element Circuit Modeling for Composite Scaffold with Nano-Hydroxyapatite and Wangi Rice Starch
    ( 2023-01-01)
    Tan X.J.
    ;
    Cheng Ee Meng
    ;
    Mohd Shukry Abdul Majid
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Lee K.Y.
    ;
    You K.Y.
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Che Wan Sharifah Robiah Mohamad
    ;
    Khor Shing Fhan
    Mechanistic studies of the interaction of electromagnetic (EM) fields with biomaterials has motivated a growing need for accurate models to describe the EM behavior of biomaterials exposed to these fields. In this paper, biodegradable bone scaffolds were fabricated using Wangi rice starch and nano-hydroxyapatite (nHA). The effects of porosity and composition on the fabricated scaffold were discussed via electrical impedance spectroscopy analysis. The fabricated scaffold was subjected to an electromagnetic field within the X-band and Ku-band (microwave spectrum) during impedance/dielectric measurement. The impedance spectra were analyzed with lumped-element models. The impedance spectra of the scaffold can be embodied in equivalent circuit models composed of passive components of the circuit, i.e., resistors, inductors and capacitors. It represents the morphological, structural and chemical characteristics of the bone scaffold. The developed models describe the impedance characteristics of plant tissue. In this study, it was found that the ε′ and ε″ of scaffold composites exhibited up and down trends over frequencies for both X-band and Ku-band. The circuit models presented the lowest mean percentage errors of Z′ and Z″, i.e., 3.60% and 13.80%, respectively.
      2  31
  • Publication
    Formation of Bio-based Derived Dicalcium Silicate Ceramics via Mechanochemical Treatment: Physical, XRD, SEM and FTIR Analyses
    ( 2023-07-01)
    Yunus S.N.H.
    ;
    Khor Shing Fhan
    ;
    Banjuraizah Johar
    ;
    Nur Maizatul Shima Adzali
    ;
    Jakfar N.H.
    ;
    Cheng Ee Meng
    ;
    Tarmizi E.Z.M.
    ;
    Talib Z.A.
    Beta-dicalcium silicate plays an important role in modern technology, but its tendency for polymorphic transformation results in the dusting phenomenon, is a major challenge. Therefore, mechanochemical treatment is used to reduce the particle size to retain the stability of the polymorph. In this study, pure dicalcium silicate ceramics of β-monoclinic structure with P 121/c1 space group were synthesized using calcium oxide and silicate powders derived from calcined eggshells and rice husks, respectively. The powders were mixed in a 2:1 molar ratio by mechanochemical treatment and heat-treated in the air at temperatures ranging from 900°C to 1100°C for 2 h. The results reveal that pure beta-dicalcium silicate formed at 1100°C without adding stabilizers. The properties of the pristine and sintered bodies were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). SEM revealed that the grain and pore sizes increase with rising sintering temperatures. FTIR spectra indicate the existence of Si-O bonds in tetrahedrons on all the samples. The sample sintered at 1000°C attains the lowest bulk density (1.2463 g/cm3), whereas the apparent porosity is the highest (62.5%). The reason for this trend is due to the decomposition of carbonate into CO2 gas. The densification onset for the sample sintered at 1100°C as the bulk density rises and grain size achieves 6.06 μm. This study further explains the effect of sintering temperatures on the physical, structural, and morphological properties of Ca2SiO4 which would also be useful for further optimization of its use.-4 SiO4.
      1
  • Publication
    Effect of sintering temperature on dielectric and electrical properties of bio-waste derived beta-dicalcium silicate
    ( 2023-11-01)
    Mohd Yunus S.N.H.
    ;
    Khor Shing Fhan
    ;
    Banjuraizah Johar
    ;
    Nur Maizatul Shima Adzali
    ;
    Jakfar N.H.
    ;
    Cheng Ee Meng
    ;
    Mohd Tarmizi E.Z.
    ;
    Talib Z.A.
    Beta-dicalcium silicate ceramics were synthesized by mechanochemical-assisted solid-state reaction route using rice husks and chicken eggshells as silica and calcium oxide sources. The ceramics were sintered at 900, 1000, and 1100 °C for 2 h in air. The effect of sintering temperature on these ceramics' morphological, breakdown strength, dielectric, and electrical properties was investigated. It was found that the ceramic sintered at the optimized temperature of 1100 °C formed the pure β-dicalcium silicate (β-Ca2SiO4). Scanning electron micrographs showed that with the increase in sintering temperature, the average grain size and pore size of the sintered ceramics increased while the grain boundary density decreased, which promoted the breakdown path and resulted in a decrease in breakdown strength. The dielectric behavior examined from 25 to 300 °C and in a frequency range of 4–5 MHz found that the dielectric constant and loss tangent decreased with increasing frequency. Nyquist plot of impedance confirmed a non-Debye type relaxation, and grain and grain boundary contributions were revealed from equivalent circuit fitting. Variations of impedance spectroscopy reflect the positive and negative temperature coefficient of resistance behavior for these ceramics. Electric modulus spectra revealed that with the sintering temperature increase, the samples' conductivity activation energies increased from 0.35 to 0.46 eV. All the sintered samples attained low dielectric loss (0.004 < tanδ < 0.1) above 103 Hz, which makes them suitable materials for capacitor application.
      2  42