Options
Ayu Wazira Azhari
Preferred name
Ayu Wazira Azhari
Official Name
Ayu Wazira, Azhari
Alternative Name
Ayu, A. W.
Azhari, Ayu W.
Main Affiliation
Scopus Author ID
24450001400
Researcher ID
ABA-7808-2020
Now showing
1 - 4 of 4
-
PublicationEffect of polyethylene glycol and sodium dodecyl sulphate on microstructure and self-cleaning properties of graphene oxide/TiO2 thin film( 2020-09-01)
;Azani A. ; ; ; ; ; ; ; ; ;Chobpattana V.Kaczmarek L.In this study, a sol gel procedure for preparation of TiO2 thin films with graphene oxide (GO) was developed. The effect of PEG and SDS addition on the microstructure of the films as well as the photocatalytic activity of the thin film was also investigated. The morphology and surface structure of the films were studied by SEM and AFM while the photocatalytic activity of the films was analyzed by measuring the degradation of methylene blue under sunlight irradiation using UV-Vis spectrophotometer. It was found that GO/TiO2 thin film with PEG shows a smaller and porous particle while GO/TiO2 thin film with SDS formed a very smooth surface and very fine particles. Therefore, in AFM analysis reveals that surface roughness decreases with the addition of PEG and SDS. Finally, the photocatalytic activity showed that GO/TiO2 thin film with SDS have the most effective self-cleaning property which degrade 64% of methylene blue that act as model of contaminants.1 -
PublicationEffect of graphene oxide on microstructure and optical properties of TiO2 thin film( 2019-01-01)
;Azani A. ; ;Razak K.A. ; ;Mohd Salleh M.A.A. ;Abdul Razak M.F.S. ; ;Ramli M.M. ;Chobpattana V.GO/TiO2 thin films have been synthesized from titanium (IV) isopropoxide (TTIP) by a sol-gel method. The films were deposited onto a glass substrate using spin coating deposition technique then were subjected to annealed process at 350 °C. The different amount of graphene oxide (GO) was added into the parent solution of sol in order to investigate the microstructure, topography, optical band gap and photocatalytic activity of the thin films. The prepared thin films were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), UV-VIS spectrophotometry and degradation of methylene blue (MB). AFM images reveal a rougher surface of GO/TiO2 thin film than bare TiO2 thin film due to GO particles. Moreover, the SEM images showed the formation of semispherical microstructure of bare TiO2 changes to some larger combined molecules with GO addition. The UV-Vis spectrophotometer results show that with optical direct energy gap decreases from 3.30 to 3.18 eV after GO addition due to the effect of high surface roughness and bigger grain size. Furthermore, the optical results also indicated that GO improved the optical properties of TiO2 in the visible range region.1 29 -
PublicationSynthesis of Ag-TiO2thin film - Molarity and temperature effect on Microstructure( 2020-08-01)
; ;Razak K.A. ;Azani A. ; ; ;Mahmed N. ;Ramli M.M. ; ;Chobpattana V.KaczmarekAg-TiO2thin films with different concentration of silver (Ag) added were successfully deposited onto Si-substrate via sol-gel spin coating method. The phase analysis and microstructures of Ag-TiO2thin films have been characterized by X-ray diffractometer and scanning electron microscope. X-ray diffraction spectra show existing different phases influenced by the concentration of the Ag and the annealing temperature. The micrograph of scanning electron microscopy revealed the thin films annealed at 600 °C with 7 mol% of Ag concentration which shows that the Ag particles were found like a white dot formed on the grain of TiO2thin films.8 23 -
PublicationThe Effect of Polyethylene Glycol (PEG) on TiO2 Thin Films via Sol-Gel Method( 2020-03-18)
; ;Razak K.A. ;Mohamad Sukeri N.S. ;Azani A. ; ; ;Mahmed N. ;Ramli M.M. ;Chobpattana V.This research focus on the effect of polyethylene glycol (PEG) on TiO2 thin film. Sol-gel method is the best method which tends to be used due to its simplicity, good chemical homogeinity and high purity of the product. Titanium (IV) isopropoxide, isopropanol and acetic acid are the three different chemical which being used to make sol solution. The samples was then will annealed at three different temperature which are 400 °C, 500 °C and 600 °C to observed the phase composition of TiO2 added PEG thin film and pure TiO2 by using X-ray diffraction (XRD) analysis and the structural surface by using scanning electron microscope (SEM) analysis. The XRD analysis show the anatase phase present for the sample of pure TiO2 thin film and rutile phase present for the sample of TiO2 added PEG thin film. The micrograph of SEM show that with the addition of PEG at high temperature will give the analysis of flaky large cracked which is not separated to each other on the surface coating. Meanwhile, pure TiO2 give the result of irregular shape structure of the film.1 17