Nasrul Amri Mohd Amin
Thumbnail Image
Preferred name
Nasrul Amri Mohd Amin
Official Name
Nasrul Amri Mohd, Amin
Alternative Name
Mohd Amin, Nasrul Amri
Amin, N. A.M.
Amin, N.
Amin, Nasrul Amri Mohd
Mohd. Amin, Nasrul Amri
Mohd Amin, N. A.
Mohd, N. A.
Main Affiliation
Scopus Author ID
57208572998
Researcher ID
ABD-8383-2020

Research Output

Filters

6 5
18
Reset filters

Settings
Now showing 1 - 10 of 18
  • Publication
    The ARX and ARMAX Models for thermoelectric cooling on glass windows: A Comparative study
    ( 2022-01-01)
    Mohd Saifizi Saidon
    ;
    Nasrul Amri Mohd Amin
    ;
    Aqilah Che Sulaiman
    ;
    Mohd Rizal Manan
    ;
    Siti Marhainis Othman
    ;
    Wan Azani Wan Mustafa
    ;
    Wahab N.A.
    Thermoelectric cooling (TEC), in particular, can be combined with a heat sink for local cooling, but they can also be integrated into electronic chips for point-to-point cooling. The study aims to develop a dynamic model of a cooling system integrated with TEC for glass window. The main target of this study is to develop a dynamic model of a cooling system integrated with TEC. The black box modelling approach in producing a mathematical model was selected based on the ARMAX and ARX model that corresponds to the actual dynamic state of the cooling system. The best model was finalized based on the best match on curve patterns when comparing the real and estimated models using the system identification tools in MATLAB, and also having the least error. The accuracy of the models was compared and analysed. The results showed that the 4th order of the ARMAX model produced a higher best fitting and standard deviation values of 80.23% and 0.027592 compared to the 4th order of the ARX model of 78.14% and 0.030769 respectively. This system accuracy is almost within the acceptable range for most error calculations in the validation method. Yet, this cooling system integrated with TEC is found more suitable for the 4th order of the ARMAX model when compared to the ARX model due to the noise parameter in the ARMAX model. Nevertheless, the noise order in this system is not dominant, therefore, whenever the noise order of the system in the ARMAX model is high than the second structure (nb), the number of errors is also high. In addition, the ARMAX model is found incapable of achieving the highest fitting due to the losses from the dynamic environment and losses from the TEC itself. Still, the use of this black box model used in this study is a significant variation where system parameters can be identified even offline.
  • Publication
    Finite element modelling of thin intermetallic compound layer fractures
    ( 2017)
    Ooi Eang Pang
    ;
    Ruslizam Daud
    ;
    Nasrul Amri Mohd Amin
    ;
    Mohd Afendi Rojan
    ;
    Mohd Shukry Abdul Majid
    A thin intermetallic compound (IMC) of solder ball joint induces strong stress concentration between the pad and solder where a crack propagated near the IMC layer. The fracture mechanism of the IMC layer is complex due to the effect of IMC thickness, crack length, solder thickness and Young’s Modulus. At present, there is still an undefined exact geometrical model correlation for numerical simulations of IMC layer fracture. Thus, this paper aims to determine the accuracy of IMC layer models subjected to crack-to-width length ratio (a/W) in correlation with the ASTM E399-83 Srawley compact specimen model using finite element (FE) analysis. Several FE models with different geometrical configurations have been proposed under 10 MPa tensile loading. In this study, the two dimensional linear elastic displacement extrapolation method (DEM) is formulated to calculate the stress intensity factor (SIF) at the crack tip. The study showed that with an error of 0.58% to 0.59%, a width of 2.1 mm and a height of 1.47 mm can be recommended as the best geometrical model for IMC layer fracture modelling which provides a wider range for a/W from 0.45 to 0.85 instead of from 0.45 to 0.55. This result is significant as it presents a method for determining fracture parameters at thin IMC layers with a combination of singular elements with meshes at different densities which is tailored to the Srawley model.
  • Publication
    Finite element modelling of thin intermetallic compound layer fractures
    ( 2017)
    Ooi Eang Pang
    ;
    Ruslizam Daud
    ;
    Nasrul Amri Mohd Amin
    ;
    Mohd Afendi Rojan
    ;
    Mohd Shukry Abd Majid
    A thin intermetallic compound (IMC) of solder ball joint induces strong stress concentration between the pad and solder where a crack propagated near the IMC layer. The fracture mechanism of the IMC layer is complex due to the effect of IMC thickness, crack length, solder thickness and Young’s Modulus. At present, there is still an undefined exact geometrical model correlation for numerical simulations of IMC layer fracture. Thus, this paper aims to determine the accuracy of IMC layer models subjected to crack-to-width length ratio (a/W) in correlation with the ASTM E399-83 Srawley compact specimen model using finite element (FE) analysis. Several FE models with different geometrical configurations have been proposed under 10 MPa tensile loading. In this study, the two dimensional linear elastic displacement extrapolation method (DEM) is formulated to calculate the stress intensity factor (SIF) at the crack tip. The study showed that with an error of 0.58% to 0.59%, a width of 2.1 mm and a height of 1.47 mm can be recommended as the best geometrical model for IMC layer fracture modelling which provides a wider range for a/W from 0.45 to 0.85 instead of from 0.45 to 0.55. This result is significant as it presents a method for determining fracture parameters at thin IMC layers with a combination of singular elements with meshes at different densities which is tailored to the Srawley model.
  • Publication
    Preliminary study of the polymesoda expansa based hydroxyapatite for medical devices coating application
    ( 2020-12-15)
    Roslan M.R.
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Gilani M.A.
    ;
    Nur Farahiyah Mohammad
    ;
    Cheng Ee Meng
    ;
    Khalid M.F.A.
    ;
    Zoolfakar A.S.
    ;
    Nasrul Amri Mohd Amin
    ;
    Shah Fenner Khan Mohamad Khan
    Hydroxyapatite (HA) which is a group of calcium phosphate (CaP) is used as a medical devices coating due to its ability to increase the bioactivity and biocompatibility of the device surface. The attraction of using waste seashells products is interesting due to its sustainability and low cost solution especially in biomedical application. Polymesoda expansa or locally known as Lokan is potentially rich with calcium carbonate (CaCO3). Here, the synthesis of HA was done via precipitation method by utilizing the Polymesoda expansa (Lokan) shells as the resource of calcium precursors. Hydroxyapatite synthesized from Polymesoda expansa was carried out with different pH solution (pH 9 and 13) in alkaline environment. The effects of pH on the morphological and chemical composition properties as well as the Ca/P ratio of HA powders were analyzed through Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Energy Dispersive X-ray Spectrometry (EDS). The finding demonstrates as the pH increases, the calcium apatite reduced and this had increases the Ca/P ratio.
  • Publication
    Performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX
    ( 2017-09-26)
    Nur Syafiqah Zhubir
    ;
    Nasrul Amri Mohd Amin
    ;
    Mohd Irwan Yusoff
    ;
    Muhammad Irwanto Misrun
    ;
    Leow Wai Zhe
    ;
    Amelia A.R.
    A research has been conducted to find the optimum combination for DC fan air cooling system of photovoltaic (PV) panel. During normal operation of PV panel, it is estimated that only 15 % of solar radiation is converted into electrical energy. Meanwhile, the rest of the solar radiation is converted into heat energy which affects the performance of the PV panel. Therefore, the aim of this research is to investigate the performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX. The effect of airflow configuration of DC fan has been investigated. This is to analyze whether the airflow circulation of DC fan cause a change towards the maximum temperature of PV panel. Besides, the impact of varying number of DC fans attached at the back of PV panel is evaluated. The result of airflow circulation of DC fan has been discussed. Meanwhile, with the increment number of DC fans, the PV panel temperature drops significantly. As a conclusion, the optimum number of DC fans is two with the combination of inlet airflow.
  • Publication
    Identification of ARX Model for Thermoelectric Cooling on Glass Windows
    ( 2022-01-01)
    Mohd Saifizi Saidon
    ;
    Nasrul Amri Mohd Amin
    ;
    ‘Aqilah Che Sulaiman
    ;
    Mohd Rizal Manan
    ;
    Siti Marhainis Othman
    ;
    Wan Azani Wan Mustafa
    ;
    Arith F.
    Thermoelectric cooling (TEC) is a solid-state heat pump that uses the Peltier effect to dissipate the heat generated by the electronic packaging system. TECs are widely used in aerospace, military, scientific work and industry due to small size, lack of moving parts, and ease of integration. In this study, a cooling system integrated with TEC is developed in a testing area (lecturer’s office) with the aim to reduce the temperature of the hot glass window area due to solar radiation that passes through it. This cooling system used direct TEC, for keeping the cooling temperature on the window to about 26 °C which is equivalent to an air conditioning setting temperature of 26 °C set during the experiment. This work includes experimental and modelling studies conducted on cooling systems integrated with TEC. The main target of this study is to develop a dynamic model of a cooling system integrated with TEC. The black box modelling approach in producing a mathematical model was selected based on the ARX model that corresponds to the actual dynamic state of the cooling system. The best model was finalized based on the best match on curve patterns when comparing the real and estimated models using the system identification tools in MATLAB, and also had the least error. The accuracy of the models was compared and analysed. The results showed that the 4th order of the ARX model produced a higher best fitting and standard deviation values of 78.14% and 0.030769. This system accuracy is almost within the acceptable range for most error calculations in the validation method. In addition, the ARX model is found incapable of achieving the highest fitting due to the losses from the dynamic environment and losses from the TEC itself. Still, the use of this black box model used in this study is a significant variation where system parameters can be identified even offline.
  • Publication
    Statistical Analysis on The Near-Wake Region of RANS Turbulence Closure Models for Vertical Axis Tidal Turbine
    ( 2023-01-01)
    Rahim M.W.A.
    ;
    Anas Abdul Rahman
    ;
    Abdul-Rahman A.
    ;
    Muhammad Izham Ismail
    ;
    Mohd Shukry Abdul Majid
    ;
    Nasrul Amri Mohd Amin
    The flow field in the near wake region (up to six turbine diameters downstream) of a tidal current turbine is strongly driven by the combined wake of the device support structure and the rotor. Accurate characterisation of the near-wake region is important, but it is dominated by highly turbulent, slow-moving fluid. At present, limited number of researches has been undertaken into the characterisation of the near-wake region for a Vertical Axis Tidal Turbine (VATT) device using the Reynolds Averaged Navier Stokes (RANS) model in the shallow water environment of Malaysia. This paper presents a comprehensive statistical analysis using the Mean Absolute Error (MEA), Mean Squared Error (MSE) and Root Mean Squared Error (RMSE) on the near-wake region for shallow water application by comparing numerical solutions (i.e., different types of RANS turbulence models using Ansys Fluent) with published experimental data. Seven RANS turbulence models with a single VATT, represented by using a cylindrical object, were employed in the preliminary study. The statistical analysis performed in this study is essential in exploring and giving a detailed understanding on the most suitable RANS turbulence model to be improved, specifically on its near-wake region. In this study, the near wake region is defined as D ≤ 6, where D is the device diameter. The analysis shows that the RANS numerical solutions are unable to accurately replicate the near-wake region based on large statistical errors computed. The average RMSE of near-wake region at z/D = [2, 3, 4, 6] are 0.5864, 0.4127, 0.4344 and 0.3577 while the average RMSE at far-wake region z/D = [8, 12] are 0.2269 and 0.1590, where z is the distance from the cylindrical object along the length of domain. The statistical error values are found to decrease with increasing downstream distance from a cylindrical object. Notably, the standard k–ε and realizable k–ε models are the two best turbulent models representing the near-wake region in RANS modelling, yielding the lowest statistical errors (RMSE at z/D = [2, 3, 4, 6] are 0.5666, 0.4020, 0.4113 and 0.3455) among the tested parameters.
  • Publication
    Tensile properties of interwoven hemp/PET (Polyethylene Terephthalate) epoxy hybrid composites
    ( 2017-10-29)
    Ahmad M.A.A.
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Nasrul Amri Mohd Amin
    This paper describes the experimental investigation of the tensile properties of interwoven Hemp/PET hybrid composites. The effect of hybridization of hemp (warp) with PET fibres (weft) on tensile properties was of interest. Hemp and PET fibres were selected as the reinforcing material while epoxy resin was chosen as the matrix. The interwoven Hemp/PET fabric was used to produce hybrid composite using a vacuum infusion process. The tensile test was conducted using Universal Testing Machine in accordance to the ASTM D638. The tensile properties of the interwoven Hemp/PET hybrid composite were then compared with the neat woven hemp/epoxy composite. The results show that the strength of hemp/PET with the warp direction was increased by 8% compared to the neat woven hemp composite. This enhancement of tensile strength was due to the improved interlocking structure of interwoven Hemp/PET hybrid fabric.
  • Publication
    Finite element modelling of thin intermetallic compound layer fractures
    ( 2017-03-01)
    Ooi Eang Pang
    ;
    Ruslizam Daud
    ;
    Nasrul Amri Mohd Amin
    ;
    Mohd Afendi Rojan
    ;
    Mohd Shukry Abdul Majid
    A thin intermetallic compound (IMC) of solder ball joint induces strong stress concentration between the pad and solder where a crack propagated near the IMC layer. The fracture mechanism of the IMC layer is complex due to the effect of IMC thickness, crack length, solder thickness and Young's Modulus. At present, there is still an undefined exact geometrical model correlation for numerical simulations of IMC layer fracture. Thus, this paper aims to determine the accuracy of IMC layer models subjected to crack-To-width length ratio (a/W) in correlation with the ASTM E399-83 Srawley compact specimen model using finite element (FE) analysis. Several FE models with different geometrical configurations have been proposed under 10 MPa tensile loading. In this study, the two dimensional linear elastic displacement extrapolation method (DEM) is formulated to calculate the stress intensity factor (SIF) at the crack tip. The study showed that with an error of 0.58% to 0.59%, a width of 2.1 mm and a height of 1.47 mm can be recommended as the best geometrical model for IMC layer fracture modelling which provides a wider range for a/W from 0.45 to 0.85 instead of from 0.45 to 0.55. This result is significant as it presents a method for determining fracture parameters at thin IMC layers with a combination of singular elements with meshes at different densities which is tailored to the Srawley model.
  • Publication
    Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car
    ( 2017-10-29)
    Norizan A.
    ;
    Md. Tasyrif bin Abdul Rahman
    ;
    Nasrul Amri Mohd Amin
    ;
    Mohd Hafif Basha Mohamad Jamel Basha
    ;
    Ismail M.H.N.
    ;
    Azarul Fahmin Ab Hamid
    This paper describes the design differences between the intake manifold and restrictor used in racing cars that participate in the Formula Student (FSAE) competition. To fulfil the criteria of rules and regulation of the race, each race car must have a restriction device that has a maximum diameter of 20 mm installed between the throttle body and intake manifold. To overcome these problems, a restrictor has been designed and analysed using the steady state analysis, to reduce the loss of pressure in the restrictor. Design of the restrictor has a fixed parameter of the maximum diameter of 20mm. There are some differences that have been taken to make the comparison between the design of the restrictor, the diameter of the inlet and outlet, the curvature of the surface, convergence and divergence angle and length of the restrictor. Intake manifold was designed based on the design of the chassis, which shall not exceed the envelope defined by the FSAE competition. A good intake manifold design will affect the performance of the engine. Each design have made an analysis designed to ensure that each cylinder engine gets its air evenly. To verify the design, steady state analysis was made for a total mass flow rate and the velocity of air leaving a runner in each engine. Data such as the engine MAP reading was recorded by using Haltech ECU Management Software as reference purposes.