Muhammad Nazrin Shah Shahrol Aman
Thumbnail Image
Preferred name
Muhammad Nazrin Shah Shahrol Aman
Official Name
Muhammad Nazrin Shah, Shahrol Aman
Alternative Name
Shah, Muhammad Nazrin
Shah, M. N.
Aman, Muhammad Nazrin Shah Shahrol
Shahrol, Mohd Nazrin
Aman, Muhammad Nazrin Shah Bin Shahrol
Main Affiliation
Scopus Author ID
55975837900
Researcher ID
FVU-0767-2022

Research Output

Filters

9
Reset filters

Settings
Now showing 1 - 9 of 9
  • Publication
    Correlation between postural stability and lower extremity joint reaction forces in young adults during incline and decline walking
    (MDPI, 2023)
    Noor Arifah Azwani Abdul Yamin
    ;
    Khairul Salleh Basaruddin
    ;
    Muhammad Farzik Ijaz
    ;
    Hiroshi Takemura
    ;
    Mohd Hanafi Mat Som
    ;
    Muhammad Nazrin Shah Shahrol Aman
    Postural stability may be affected during slope walking, as there are different body kinetics and kinematic responses compared with level walking. Understanding body adaptations toward different inclinations is essential to prevent the risk of injury from falls or slips. This study was conducted to determine the correlations between stability parameters and loading response in terms of joint reaction force at the lower-extremity joints during inclined and declined walking. Twenty male subjects walked in the level, incline, and decline directions on a custom-built platform at three different slope angles (i.e., 5°, 7.5°, and 10°). To determine the ground reaction force (GRF), joint reaction force (JRF), center of pressure (COP), and center of mass (COM), a motion capture system was used to read the data of the ten reflective markers and transfer them to visual three-dimensional (3D) software. Pearson’s correlation test was performed with statistical significance set at p < 0.05 to evaluate the correlation of the required coefficient of friction (RCOF), postural stability index (PSI), and COP-COM distance with the JRF. This study has identified that the JRF changes in opposition to the changes in the RCOF during the initial strike during incline and decline walking, as JRF increases, the RCOF decreases with different strengths of correlation. There is also a strong positive correlation between the PSI and JRF in the proximal–distal direction, where the JRFs change in accordance with the change in the PSI, and the JRF increases with the increment of PSI. In addition, the JRF of the lower extremity also changed in a manner similar to the COP-COM distance in the medial–lateral direction. Overall, each stability parameter was correlated with the JRF of the lower-extremity joints in different directions and strengths. This study demonstrated that slope walking is particularly affected by surface inclination in terms of stability and loading. Therefore, this research can serve as a basis for future studies on slopes, as there is no specific basis for a maximum degree of inclination that is safe and suitable for all applications.
  • Publication
    Mechanical behaviour on concrete of coconut coir fiber as additive
    ( 2020-12-18)
    Nurul Akmam Naamandadin
    ;
    Rosdi, Mohamad Saifullah
    ;
    Wan Azani Wan Mustafa
    ;
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Syahrul Affandi Saidi
    Fiber is one of the famous waste material in this country and fibre also can be used in order to increase the mechanical properties of concrete. Mechanical properties of concrete will be testing such compression strength and splitting tensile strength. Concrete has low tensile strength due to the brittleness properties. The coconut coir fibre processed by using the fabricated. Then the coconut coir fibre will be a sink in sodium hydroxide for 1 week and in pure water for 2 weeks at room temperature. The authorities that are already going through under treatment gave coconut coir fibre and it had been cut into a size of 25mm to 30mm. Three different ratios used in this research, which is 3%, 4% and 5% of coconut coir fibre as an additive to the concrete. There will be two types of specimens, which are cube size of 100mm x 100mm and cylinder 100mm diameter with 200mm length. All the samples cured in a water tank for 7 and 28days. The rate that had been using for this compression strength and splitting tensile strength follow the British Standard (BS 1881-116:1983). This research outcome is the addition of coconut coir fibre with concrete to increase the compression strength of the cube sample but it has lower strength than normal concrete. Meanwhile, for the splitting tensile strength of this reinforced concrete with coconut coir fibre as an additive has higher strength than normal concrete. The result proved that the addition of fibre will increase the mechanical properties of concrete but at the same time, it will decrease the workability of concrete.
      6  17
  • Publication
    Design of an autonomous pipe-cleaning robot for small-scale hydroponic systems
    (Penerbit UniMAP, 2025-06)
    Akif Syafiru Shukor
    ;
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Zainal Abidin Arsat
    Hydroponic farming offers a sustainable solution to food insecurity, especially in developing countries, by enabling high-yield crop production with minimal land and water usage. However, one major challenge in hydroponic systems is the frequent clogging of PVC pipes due to debris from growing media and the buildup of algae, which thrives under high humidity and limited sunlight. These blockages not only reduce system efficiency but also increase the risk of plant diseases that can compromise entire harvests. To address this issue, this research focuses on the design and development of a compact mobile robot capable of cleaning hydroponic pipes. The robot is designed using SolidWorks and simulated in Tinkercad, targeting a 4-inch (110 mm) diameter PVC pipe with a length of 3 feet. It incorporates the HC-SR04 ultrasonic sensor to detect obstacles and uses acrylic as the structural material. The performance of the robot was tested against three types of common pipe obstructions: small stones, sand and grass roots. Experimental results show that the robot can navigate through the hydroponic pipe and partially remove debris, although complete cleaning remains challenging due to space constraints and the complexity of internal pipe conditions. This work demonstrates a low-cost, automated solution for maintaining hydroponic systems and highlights areas for further optimization in design and control.
      3  23
  • Publication
    Fabrication of Parallel Ankle Rehabilitation Robot
    ( 2021-01-01)
    Ismail M.K.A.B.
    ;
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Wan Azani Wan Mustafa
    In this modernization era, we have been showered with multiple of technologies which have leaded a much more comforting lifestyle especially to humankind. This report presents a survey of development of parallel based ankle rehabilitation robot. As a result, robot therapy systems have been developed worldwide for training lower extremities. This work reviews all current robotic systems to date for ankle injury, with the aim of showing a clear starting point in the field. It also discusses numerous challenges faced by engineers in designing this robot, including framework stability, universal evaluation criteria to assess end-user comfort, safety and training performance and the scientific basis on the optimal rehabilitation strategies to improve ankle condition. Nowadays, there is so many treatment machine and it can be use at hospital or physiotherapy unit, clinic, and health centre with expensive cost This development is to reduce a cost for the treatment and also make the model easy to carry anywhere Based on the previously defined constraints, the goal of robotic robot development for ankle recovery is to create a treatment for ankle recovery by integrating software and hardware process, also analyses performance of ankle rehabilitation robot model. This project will consist of two main parts, which are the design and development parts. For the software design, Solidworks are selected to make the dimension and design. For the development part, the material for the framework is an aluminum will be select and use. The result will be including a degree of freedom for the rotation of the platform using load and no load. This project mainly aids the users who is affected by stroke, illness or injuries due to accident and encouraging them to exercise regularly in house without consulting the physiotherapist in the hospital.
      5  30
  • Publication
    A review of diesel spray research
    ( 2020-12-18)
    Mohd Al-Hafiz Mohd Nawi
    ;
    Wan Azani Wan Mustafa
    ;
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Syahrul Affandi Saidi
    ;
    Ilham Shafini Ahmad Mahyudin
    ;
    Mohd Aminudin Jamlos
    The following literature review provides an overview of research and a summary of the most condition that relevant to the present study. The overview focuses on such parameter such as the effect of ambient condition (density and temperature), the effect of fuel injection, the effect of injection pressure, the effect of mass fuel and effect of nozzle diameter that probably effects into the droplets distribution, sprays evaporation and mixture formation of diesel spray. The preferred format has been choosing to allow an easier scanning and classification which intend to summarize the relevant topic and study regarding the diesel spray fields.
      5  36
  • Publication
    Correlation between Postural Stability and Lower Extremity Joint Reaction Forces in Young Adults during Incline and Decline Walking
    ( 2023-12-01)
    Yamin N.A.A.A.
    ;
    Khairul Salleh Basaruddin
    ;
    Ijaz M.F.
    ;
    Mohd Hanafi Mat Som
    ;
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Takemura H.
    Postural stability may be affected during slope walking, as there are different body kinetics and kinematic responses compared with level walking. Understanding body adaptations toward different inclinations is essential to prevent the risk of injury from falls or slips. This study was conducted to determine the correlations between stability parameters and loading response in terms of joint reaction force at the lower-extremity joints during inclined and declined walking. Twenty male subjects walked in the level, incline, and decline directions on a custom-built platform at three different slope angles (i.e., 5°, 7.5°, and 10°). To determine the ground reaction force (GRF), joint reaction force (JRF), center of pressure (COP), and center of mass (COM), a motion capture system was used to read the data of the ten reflective markers and transfer them to visual three-dimensional (3D) software. Pearson’s correlation test was performed with statistical significance set at p < 0.05 to evaluate the correlation of the required coefficient of friction (RCOF), postural stability index (PSI), and COP-COM distance with the JRF. This study has identified that the JRF changes in opposition to the changes in the RCOF during the initial strike during incline and decline walking, as JRF increases, the RCOF decreases with different strengths of correlation. There is also a strong positive correlation between the PSI and JRF in the proximal–distal direction, where the JRFs change in accordance with the change in the PSI, and the JRF increases with the increment of PSI. In addition, the JRF of the lower extremity also changed in a manner similar to the COP-COM distance in the medial–lateral direction. Overall, each stability parameter was correlated with the JRF of the lower-extremity joints in different directions and strengths. This study demonstrated that slope walking is particularly affected by surface inclination in terms of stability and loading. Therefore, this research can serve as a basis for future studies on slopes, as there is no specific basis for a maximum degree of inclination that is safe and suitable for all applications.
      2  38
  • Publication
    Home-based ankle rehabilitation system: Literature review and evaluation
    ( 2017-09-01)
    Lim Chee Chin
    ;
    Shafriza Nisha Basah
    ;
    Marwan Affandi
    ;
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Sazali Yaacob
    ;
    Yeap Ewe Juan
    ;
    Mohamad Yazid Din
    Ankle sprain Injury is one of the most common ankle injuries due to domestic or sporting accidents. There is a need for greater demand for quick and effective ankle rehabilitation system (ARS). Nowadays, research on ARS has gained a great attention than manual clinical method in medical areas such as orthopedic injuries, pediatrics sport medicine and industrial services. It can improve the treatment conditions by reducing the dependency of doctors’ supervision, help patient with less movable to have home-based rehab exercise and help to speeds up recovery. There are currently available ARS that can provide effective ankle rehabilitation treatment such as Visual, Non-Visual and Robot-aided. In this paper, the critical review of ARS is conducted to evaluate the effectiveness of ARS in terms of provided setting criteria. The strengths, weaknesses, opportunities and threats of each ARS is discussed and compared to identify the most suitable home application of ARS for ankle sprain patient. From the comparison, the most suitable home application ARS is the visual marker-less based ARS system which give user-friendly, efficiency, validity in performance and cheaper cost.
      51  9
  • Publication
    Design of electroadhesion pad for improving grasping friction of soft robotic glove
    ( 2024-02-08)
    Muhammad Hisyam Rosle
    ;
    Amirul Syafiq Siraj Jaafar
    ;
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Abdul Nasir Abd. Ghafar
    A soft wearable robotic glove was developed to provide grasping assistance to patients with neuromuscular impairment. Sufficient friction forces is required in grasping objects as lack of friction between the glove and the surface of the object will result in slippage. In this paper, the application of electroadhesion in order to increase the frictional force for wearable robotic gloves is presented. The characteristics of the proposed electroadhesion pad is lightweight, thin, and easy to be operated by the patients. The work involves designing and fabricating soft electroadhesive pad and embedding them to the robotic glove. The electroadhesion pad was supplied with voltage lower than 400V for safety purposes. Experimental results verified that the proposed design of electroadhesion pad can increase the friction force when grasping various objects. Experimental results shows that the higher the contact area of electroadhesion applied, the higher the resulted frictional forces. Moreover, it can be noted that higher contact area of electroadhesion requires a higher voltage input to produce electroadhesive force.
      15  39
  • Publication
    Parametric design optimization of an ankle rehabilitation robot using SolidWorks
    ( 2020-12-18)
    Muhammad Nazrin Shah Shahrol Aman
    ;
    Shafriza Nisha Basah
    ;
    Khairul Salleh Basaruddin
    ;
    Wan Khairunizam Wan Ahmad
    ;
    Bin Ahmad S.A.
    ;
    Wan Azani Wan Mustafa
    This paper presents the approach to determine most suitable dimensions and volume of the proposed ankle rehabilitation robot design. This design aim is the robot needs to be portable without compromising the workspace of the proposed robot and it must fulfill all required basic ankle motions. To do this, optimisation was used to generate possible initial dimensions in order to achieve suitable length for the outer frame through minimization of the dimensions. Based on the selected variables and constraints, the result of the optimization shows minimization of the proposed design has been achieved through reduction of the dimension of the outer frame of the robot in which translate the reduction of the weight of the robot.
      6  37