Ong Soon An
Thumbnail Image
Preferred name
Ong Soon An
Official Name
Ong, Soon An
Alternative Name
Ong, Soon An
Ong, S. A.
Soon An, Ong
Soon-An, Ong
ONG, Soon An
Ong, Soon an
Soon-An, Ong
Main Affiliation
Scopus Author ID
57201387782
Researcher ID
B-9255-2012

Research Output

Filters

6
6
Reset filters

Settings
Now showing 1 - 6 of 6
  • Publication
    Pilot scale single chamber up-flow membrane-less microbial fuel cell for wastewater treatment and electricity generation
    ( 2017-04-06)
    Thung W.E.
    ;
    Ong Soon An
    ;
    Ho Li Ngee
    ;
    Wong Yee Shian
    ;
    Fahmi Muhammad Ridwan
    ;
    Oon Yoong Ling
    ;
    Oon Yoong Sin
    ;
    Harvinder Kaur Lehl
    Pilot scale up-flow membrane-less microbial fuel cell (UFML-MFC) was constructed to study feasibility of the bioreactor for simultaneous degradation of organic substance and electricity generation. The performance of the UFML-MFC was evaluated with different anode electrode (cube carbon felt and stacked carbon felt) in terms of voltage output, chemical oxygen demand (COD) and Coulombic efficiency (CE). Carbon flake were used as cathode in the UFML-MFC. UFML-MFC was operated in three stages where included batch-fed, end of batch fed and semi-continuous. The Cube carbon felt as anode have the better performance in terms of voltage output and electricity generation in all 3 stages. Maximum voltage output was 0.311 ± 0.004 V at 75% of COD reduction and thus CE was 0.15%. The result shows the operational mode is the key to improve the voltage output and also COD reduction.
  • Publication
    Hybrid system of photocatalytic fuel cell and Fenton process for electricity generation and degradation of Reactive Black 5
    ( 2017-01-01)
    Noradiba Nordin
    ;
    Ho Li Ngee
    ;
    Ong Soon An
    ;
    Abdul Haqi Ibrahim
    ;
    Wong Yee Shian
    ;
    Lee Sin Li
    ;
    Oon Yoong Sin
    ;
    Oon Yoong Ling
    A novel hybrid system composed of a photocatalytic fuel cell (PFC) and Fenton reactor was developed with the aim to degrade the azo dye Reactive Black 5 (RB5) and generate electricity. Compared to previously established system of bioelectro-Fenton system, microbial fuel cell (MFC) system has significant challenge in the development and operation system. Therefore, PFC is used instead of MFC to generate electrons for the Fenton system. The effect of azo dye (RB5) on each PFC and Fenton reactor was investigated. The experimental results showed that maximum power output was achieved in the absence of dye in the Fenton reactor of this hybrid system. Furthermore, higher degradation efficiency of RB5 could also be observed in the PFC reactor in this hybrid system.
  • Publication
    Microbial fuel cell operation using monoazo and diazo dyes as terminal electron acceptor for simultaneous decolourisation and bioelectricity generation
    ( 2017-03-05)
    Oon Yoong Sin
    ;
    Ong Soon An
    ;
    Ho Li Ngee
    ;
    Wong Yee Shian
    ;
    Oon Yoong Ling
    ;
    Harvinder Kaur Lehl
    ;
    Thung Wei Eng
    ;
    Noradiba Nordin
    Monoazo and diazo dyes [New coccine (NC), Acid orange 7 (AO7), Reactive red 120 (RR120) and Reactive green 19 (RG19)] were employed as electron acceptors in the abiotic cathode of microbial fuel cell. The electrons and protons generated from microbial organic oxidation at the anode which were utilized for electrochemical azo dye reduction at the cathodic chamber was successfully demonstrated. When NC was employed as the electron acceptor, the chemical oxygen demand (COD) removal and dye decolourisation efficiencies obtained at the anodic and cathodic chamber were 73 Â± 3% and 95.1 Â± 1.1%, respectively. This study demonstrated that the decolourisation rates of monoazo dyes were ∼50% higher than diazo dyes. The maximum power density in relation to NC decolourisation was 20.64 mW/m 2 , corresponding to current density of 120.24 mA/m 2 . The decolourisation rate and power output of different azo dyes were in the order of NC > AO7 > RR120 > RG19. The findings revealed that the structure of dye influenced the decolourisation and power performance of MFC. Azo dye with electron-withdrawing group at para substituent to azo bond would draw electrons from azo bond; hence the azo dye became more electrophilic and more favourable for dye reduction.
  • Publication
    Decolorization and mineralization of Amaranth dye using multiple zoned aerobic and anaerobic baffled constructed wetland
    ( 2017-08-03)
    Harvinder Kaur Lehl
    ;
    Ong Soon An
    ;
    Ho Li Ngee
    ;
    Wong Yee Shian
    ;
    Farah Naemah Mohd Saad
    ;
    Oon Yoong Ling
    ;
    Oon Yoong Sin
    ;
    Thung Wei Eng
    ;
    Yong Chin Yii
    The objective of this study is to determine the reduction efficiency of Chemical Oxygen Demand (COD) as well as the removal of color and Amaranth dye metabolites by the Aerobic–anaerobic Baffled Constructed Wetland Reactor (ABCW). The ABCW reactor was planted with common reed (Phragmite australis) where the hydraulic retention time (HRT) was set to 1 day and was fed with synthetic wastewater with the addition of Amaranth dye. Supplementary aeration was supplied in designated compartments of the ABCW reactor to control the aerobic and anaerobic zones. After Amaranth dye addition the COD reduction efficiency dropped from 98 to 91% while the color removal efficiency was 100%. Degradation of azo bond in Amaranth dye is shown by the UV–Vis spectrum analysis which demonstrates partial degradation of Amaranth dye metabolites. The performance of the baffled unit is due to the longer pathway as there is the up-flow and down-flow condition sequentially, thus allowing more contact of the wastewater with the rhizomes and micro-aerobic zones.
      29  1
  • Publication
    Role of macrophyte and effect of supplementary aeration in up-flow constructed wetland-microbial fuel cell for simultaneous wastewater treatment and energy recovery
    ( 2017-01-01)
    Oon Yoong Ling
    ;
    Ong Soon An
    ;
    Ho Li Ngee
    ;
    Wong Yee Shian
    ;
    Farrah Aini Dahalan
    ;
    Oon Yoong Sin
    ;
    Harvinder Kaur Lehl
    ;
    Thung Wei Eng
    ;
    Noradiba Nordin
    This study investigates the role of plant (Elodea nuttallii) and effect of supplementary aeration on wastewater treatment and bioelectricity generation in an up-flow constructed wetland-microbial fuel cell (UFCW-MFC). Aeration rates were varied from 1900 to 0 mL/min and a control reactor was operated without supplementary aeration. 600 mL/min was the optimum aeration flow rate to achieve highest energy recovery as the oxygen was sufficient to use as terminal electron acceptor for electrical current generation. The maximum voltage output, power density, normalized energy recovery and Coulombic efficiency were 545.77 ± 25 mV, 184.75 ± 7.50 mW/m3, 204.49 W/kg COD, 1.29 W/m3 and 10.28%, respectively. The variation of aeration flow rates influenced the NO3− and NH4+ removal differently as nitrification and denitrification involved conflicting requirement. In terms of wastewater treatment performance, at 60 mL/min aeration rate, UFCW-MFC achieved 50 and 81% of NO3− and NH4+ removal, respectively. E. nuttallii enhanced nitrification by 17% and significantly contributed to bioelectricity generation.
      32  1
  • Publication
    Influence of Amaranth dye concentration on the efficiency of hybrid system of photocatalytic fuel cell and Fenton process
    ( 2017-10-01)
    Noradiba Nordin
    ;
    Ho Li Ngee
    ;
    Ong Soon An
    ;
    Abdul Haqi Ibrahim
    ;
    Wong Yee Shian
    ;
    Sin Li Lee
    ;
    Oon Yoong Sin
    ;
    Oon Yoong Ling
    A novel sustainable hybrid system of photocatalytic fuel cell (PFC) and Fenton process is an alternative wastewater treatment technology for energy-saving and efficient treatment of organic pollutants. The electrons generated from PFC photoanode are used to produce H2O2 in the Fenton reactor and react with the in situ generation of Fe2+ from sacrificial iron for hydroxyl radical formation. In this study, the effect of different initial Amaranth dye concentrations on degradation and electricity generation were investigated. ZnO/Zn photoanode was prepared by anodizing method and characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). Results revealed that the maximum power density (9.53 mW/m2) and current density (0.0178 mA/m2) were achieved at 10 mg/L of Amaranth. The correlation between dye degradation, voltage output, and kinetic photocatalytic degradation were also investigated and discussed.
      1  36