Naimah Ibrahim
Thumbnail Image
Preferred name
Naimah Ibrahim
Official Name
Ibrahim, Naimah
Alternative Name
Ibrahim, Naimah
Ibrahim, N.
Naimah, I.
Main Affiliation
Scopus Author ID
23767004300
Researcher ID
AAA-9532-2021

Research Output

Filters

12
12
Reset filters

Settings
Now showing 1 - 10 of 12
  • Publication
    Advancement in recycling waste tire activated carbon to potential adsorbents
    ( 2022-12-01)
    Umi Fazara Md Ali
    ;
    Hussin F.
    ;
    Subash Chandra Bose Gopinath
    ;
    Aroua M.K.
    ;
    Khamidun M.H.
    ;
    Jusoh N.
    ;
    Naimah Ibrahim
    ;
    Ahmad S.F.K.
    Waste tires have been identified as one of the contributors to environmental problems and the issue of inadequate landfill spaces. The lack of consistent and systematic approaches such as specific regulations/laws or mechanisms of waste management to waste tires, limited application of technology for recycling waste tires and lack of awareness on the impacts of waste tires problem, make waste tires a source of environmental pollution. Various researches have been conducted on recycling waste tires into polymer bends, and materials to harden concretes, fuels and adsorbent. Researchers suggested that pyrolysis is the current trend of recycling waste tire to harvest the saleable pyrolysis oil and the recycled carbon black. Therefore, this review attempts to compile relevant knowledge about the potential of adsorbent derived from waste tires to be applied in the removal of various types of pollutants like heavy metals, organic pollutants, dye and air/gaseous pollutant. Studies were carried out on revealing the properties and the characteristics of activated carbon derived from waste tire as effective adsorbent which influence the application performance at liquid or gas phase. In addition, the challenges in the production of activated carbon derived from waste tire were discussed.
  • Publication
    Sulfur dioxide removal by calcium-modified fibrous KCC-1 mesoporous silica: kinetics, thermodynamics, isotherm and mass transfer mechanism
    ( 2022-04-01)
    Hanif M.A.
    ;
    Naimah Ibrahim
    ;
    Khairuddin Md Isa
    ;
    Umi Fazara Md Ali
    ;
    Tuan Abdullah T.A.
    ;
    Jalil A.A.
    The removal of sulfur dioxide from industrial flue gas through dry flue gas desulfurization method commonly involves the use of adsorption process with porous sorbent. The efficiency of this process is highly dependent on the adsorption capacity and the adsorption rate of SO2 onto the sorbent materials. The use of KCC-1 mesoporous silica modified with calcium metal additives (Ca/KCC-1) in SO2 adsorption is examined in a fixed bed reactor system. The adsorption capacity of Ca/KCC-1 is found to be critically governed by the reaction temperature and inlet SO2 concentration where low values of both parameters are favorable to achieve the highest adsorption capacity of 3241.94 mg SO2/g sorbent. SO2 molecules are adsorbed on the surface of Ca/KCC-1 by both physisorption and chemisorption processes as assumed by the Avrami kinetic model. Thermodynamic study shows that the process is exothermic and spontaneous in nature, and changes from an ordered stage on the surface of KCC-1 towards an increasingly random stage. The process is well explained by Freundlich isotherm model indicating a slightly heterogeneous process and moderate adsorption capacity. The adsorption stage is limited by film diffusion at the initial stage and by intraparticle diffusion during the transfer of SO2 into the network of pores before adsorption takes place on the active sites.
  • Publication
    Microplastics and nanoplastics: Recent literature studies and patents on their removal from aqueous environment
    ( 2022-03-01)
    Hanif M.A.
    ;
    Naimah Ibrahim
    ;
    Farrah Aini Dahalan
    ;
    Umi Fazara Md Ali
    ;
    Masitah Hasan
    ;
    Jalil A.A.
    The presence of microplastics (MP) and nanoplastics (NP) in the environment poses significant hazards towards microorganisms, humans, animals and plants. This paper is focused on recent literature studies and patents discussing the removal process of these plastic pollutants. Microplastics and nanoplastics can be quantified by counting, weighing, absorbance and turbidity and can be further analyzed using scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, surface-enhanced Raman spectroscopy and Raman tweezers. Mitigation methods reported are categorized depending on the removal characteristics: (i) Filtration and separation method: Filtration and separation, electrospun nanofiber membrane, constructed wetlands; (ii) Capture and surface attachment method: coagulation, flocculation and sedimentation (CFS), electrocoagulation, adsorption, magnetization, micromachines, superhydrophobic materials and microorganism aggregation; and (iii) Degradation method: photocatalytic degradation, microorganism degradation and thermal degradation; where removal efficiency between 58 and 100% were reported. As these methods are significantly distinctive, the parameters which affect the MP/NP removal performance e.g., pH, type of plastics, presence of interfering chemicals or ions, surface charges etc. are also discussed. 42 granted international patents related to microplastics and nanoplastics removal are also reviewed where the majority of these patents are focused on separation or filtration devices. These devices are efficient for microplastics up to 20 μm but may be ineffective for nanoplastics or fibrous plastics. Several patents were found to focus on methods similar to literature studies e.g., magnetization, CFS, biofilm and microorganism aggregation; with the addition of another method: thermal degradation.
  • Publication
    Oil palm waste-derived reduced graphene oxide (rGO) for dynamic adsorption of dye in a fixed-bed system
    ( 2024-01-01)
    Mohd Ali Jinnah S.N.H.
    ;
    Umi Fazara Md Ali
    ;
    Subash Chandra Bose Gopinath
    ;
    Naimah Ibrahim
    ;
    Razi Ahmad
    ;
    Mohamed Zuki F.
    This study focuses on investigating the dynamic adsorption of Rhodamine B (RhB) from reduced graphene oxide (rGO) derived from oil palm waste. The synthesis of rGO from palm kernel shell (PKS) was achieved through double oxidation and carbonization method, resulting in a yield of 73.5 wt%. The reduction of oxygen-containing functionalities process using PKS was confirmed by FTIR spectroscopy, microscopic evaluation, and X-ray diffraction analyses. Laboratory-scale fixed-bed experiments were conducted with various process parameters. Both PKS and rGO were used as adsorbents, and a comparison was made based on breakthrough curve analysis, adsorption capacity and percentage removal of dye. The adsorption kinetics of RhB on PKS and rGO were best described by the non-linear Yoon-Nelson model, with a high adsorption capacity of 88.32 mg/g and 195.24 mg/g respectively. Using both PKS and rGO, the maximum adsorption capacity was observed when using 10 cm bed depth column, inlet dye concentration of 5 mg/L, flow rate of 12 mL/min and pH of 7. PKS exhibited good dye removal with an efficiency of 66.54%. Meanwhile, the exothermic behavior highlighted the potential of utilizing rGO for maximum dye removal, achieving an efficiency of 90.35%. This study justifies rGO as a cost-effective superior dye removal adsorbent, providing new prospect for large-scale dye removal.
  • Publication
    Surface alkali promotion of carbon dioxide hydrogenation for conservation of carbon sources: Cyclic voltammetry study
    ( 2020-01-01)
    Tan S.Y.
    ;
    Naimah Ibrahim
    ;
    Umi Fazara Md Ali
    ;
    Sara Yasina Yusuf
    ;
    Aroua M.K.
    Conversion of CO2 captured from biogas upgrading process into useful chemicals or fuels e.g. methane is an attractive route towards conservation of carbon sources. Sustainable hydrogenation route could be achieved by combining the process with hydrogen generated from water electrolysis. In this work, cyclic voltammetry was used as preliminary technique to probe the electrochemical behaviour of Na-modified Pt/YSZ as model catalyst under CO2 hydrogenation. The reaction is irreversible and the voltammogram features are not easily distinguishable under reaction conditions. The increase in cathodic peak height and the decrease in peak potential with addition of sodium at low coverage (0.32%) indicated that the charge transfer reaction was enhanced and thus the methanation reaction could be electrochemically promoted given sufficient amount of H2 flow. However, increasing Na coverage was found to decrease the current hysteresis possibly due to formation of sodium compounds such as carbonates or oxides that populate the three-phase-boundary (tpb) active sites, thus deactivating the catalyst.
      1
  • Publication
    Optimization of Nickel Precipitation and Leaching Process from Simulated Industrial Waste: A Study on pH, Contact Time, and Sulfuric Acid Concentration
    ( 2024-01-01)
    Zulkurnai N.Z.
    ;
    Umi Fazara Md Ali
    ;
    Naimah Ibrahim
    ;
    Mohd Irfan Hatim Mohamed Dzahir
    ;
    Nor Ashikin Ahmad
    ;
    Zuki F.M.
    The presence of nickel in industrial waste has emerged as a significant environmental concern, predominantly attributed to the plating industry. The significant objective of this study is to optimize the precipitation and leaching method to extract valuable nickel from the waste material. The high concentration of nickel found in the waste makes it a potentially valuable resource. To explore its potential extraction, the precipitation and leaching processes were optimized using a simulated Watts bath solution which is widely employed in the industry. This study focuses on examining the influence of pH, contact time, and sulfuric acid concentration on the extraction of nickel concentration during the precipitation and leaching processes. To develop a prediction model for the process, three models were taken into consideration: quadratic, linear, and 2F1. The quadratic model exhibited the greatest adjusted R2 value, suggesting a superior level of fit in comparison with the linear and 2F1 models. The predicted R2 value of 0.8169 exhibits a satisfactory level of concordance with the adjusted R2 value of 0.9737. The recommended optimal conditions proposed by response surface methodology (RSM) consisted of a pH value of 10.56, a contact time of 16.52 h, and a sulfuric acid concentration of 1.80 M in order to achieve a nickel concentration of 28,415 mg/L.
      1
  • Publication
    Microplastics and nanoplastics: Recent literature studies and patents on their removal from aqueous environment
    ( 2022-03-01)
    Muhammad Adli Hanif
    ;
    Naimah Ibrahim
    ;
    Farrah Aini Dahalan
    ;
    Umi Fazara Md Ali
    ;
    Masitah Hasan
    ;
    Jalil A.A.
    The presence of microplastics (MP) and nanoplastics (NP) in the environment poses significant hazards towards microorganisms, humans, animals and plants. This paper is focused on recent literature studies and patents discussing the removal process of these plastic pollutants. Microplastics and nanoplastics can be quantified by counting, weighing, absorbance and turbidity and can be further analyzed using scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, surface-enhanced Raman spectroscopy and Raman tweezers. Mitigation methods reported are categorized depending on the removal characteristics: (i) Filtration and separation method: Filtration and separation, electrospun nanofiber membrane, constructed wetlands; (ii) Capture and surface attachment method: coagulation, flocculation and sedimentation (CFS), electrocoagulation, adsorption, magnetization, micromachines, superhydrophobic materials and microorganism aggregation; and (iii) Degradation method: photocatalytic degradation, microorganism degradation and thermal degradation; where removal efficiency between 58 and 100% were reported. As these methods are significantly distinctive, the parameters which affect the MP/NP removal performance e.g., pH, type of plastics, presence of interfering chemicals or ions, surface charges etc. are also discussed. 42 granted international patents related to microplastics and nanoplastics removal are also reviewed where the majority of these patents are focused on separation or filtration devices. These devices are efficient for microplastics up to 20 μm but may be ineffective for nanoplastics or fibrous plastics. Several patents were found to focus on methods similar to literature studies e.g., magnetization, CFS, biofilm and microorganism aggregation; with the addition of another method: thermal degradation.
      1
  • Publication
    Microplastics in facial cleanser: extraction, identification, potential toxicity, and continuous-flow removal using agricultural waste–based biochar
    ( 2023-05-01)
    Hanif M.A.
    ;
    Naimah Ibrahim
    ;
    Farrah Aini Dahalan
    ;
    Umi Fazara Md Ali
    ;
    Masitah Hasan
    ;
    Ayu Wazira Azhari
    ;
    Jalil A.A.
    Microplastic (MP) is an emerging contaminant of concern due to its ubiquitous quantity in the environment, small size, and potential toxicity due to strong affinity towards other contaminants. In this work, MP particles (5–300 μm) were extracted from a commercial facial cleanser and determined to be irregular polyethylene (PE) microbeads based on characterization with field emission scanning electron microscopy (FESEM) and Raman spectroscopy. The potential of extracted MP acting as toxic pollutants’ vector was analyzed via adsorption of methylene blue and methyl orange dye where significant dye uptake was observed. Synthetic wastewater containing the extracted MP was subjected to a continuous-flow column study using palm kernel shell and coconut shell biochar as the filter/adsorbent media. The prepared biochar was characterized via proximate and ultimate analysis, FESEM, contact angle measurement, atomic force microscopy (AFM), and Fourier transform infrared (FTIR) spectroscopy to investigate the role of the biochar properties in MP removal. MP removal performance was determined by measuring the turbidity and weighing the dry mass of particles remaining in the effluent following treatment. Promising results were obtained from the study with highest removal of MP (96.65%) attained through palm kernel shell biochar with particle size of 0.6–1.18 mm and continuous-flow column size of 20 mm. Graphical abstract: [Figure not available: see fulltext.].
      1
  • Publication
    Advancement in recycling waste tire activated carbon to potential adsorbents
    ( 2022-12-01)
    Umi Fazara Md Ali
    ;
    Hussin F.
    ;
    Subash Chandra Bose Gopinath
    ;
    Aroua M.K.
    ;
    Khamidun M.H.
    ;
    Jusoh N.
    ;
    Naimah Ibrahim
    ;
    Syahirah Faraheen Kabir Ahmad
    Waste tires have been identified as one of the contributors to environmental problems and the issue of inadequate landfill spaces. The lack of consistent and systematic approaches such as specific regulations/laws or mechanisms of waste management to waste tires, limited application of technology for recycling waste tires and lack of awareness on the impacts of waste tires problem, make waste tires a source of environmental pollution. Various researches have been conducted on recycling waste tires into polymer bends, and materials to harden concretes, fuels and adsorbent. Researchers suggested that pyrolysis is the current trend of recycling waste tire to harvest the saleable pyrolysis oil and the recycled carbon black. Therefore, this review attempts to compile relevant knowledge about the potential of adsorbent derived from waste tires to be applied in the removal of various types of pollutants like heavy metals, organic pollutants, dye and air/gaseous pollutant. Studies were carried out on revealing the properties and the characteristics of activated carbon derived from waste tire as effective adsorbent which influence the application performance at liquid or gas phase. In addition, the challenges in the production of activated carbon derived from waste tire were discussed.
      1
  • Publication
    Optimization of Nickel Electrowinning from Simulated Watts Bath of Electronics Industrial Waste
    ( 2023-01-01)
    Zulkurnai N.Z.
    ;
    Hua Y.M.
    ;
    Umi Fazara Md Ali
    ;
    Mohd Irfan Hatim Mohamed Dzahir
    ;
    Naimah Ibrahim
    ;
    Zuki F.M.
    Plating process now has been widely used in the electronics industries for corrosion resistance purpose. One of favorable solution used in nickel-plating process is Watts Bath solution. After several duration of time, the used Watts Bath must be discarded. Due to high amount of nickel concentration inside the Watts Bath, it has been considered as a schedule waste and need a proper disposal process which is expensive. One of reliable methods to dispose and recover nickel from the Watts Bath is by using electrowinning process. The aims of this study are to determine concentration of Watts Bath and to optimize the electrowinning process by using Box-Bhenken Design from Simulated Watts Bath of Electronics Industrial Waste. During this study, the electrolyte concentration, potential applied and contact time were optimized, and the surface morphology of nickel deposited also has been studied. From the result, the concentration of Watts Bath solution is 153 g/L and the removal of 75.04% was obtained under optimized condition which were 0.4 M of electrolyte concentration, 0.4 V of potential applied, and 60 min of contact time.
      1