Cheng Ee Meng
Thumbnail Image
Preferred name
Cheng Ee Meng
Official Name
Cheng, Ee Meng
Alternative Name
Cheng, E. M.
Cheng, Ee M.
Cheng, Ee Meng
Main Affiliation
Scopus Author ID
57219023469
Researcher ID
IOQ-9149-2023

Research Output

Filters

52
Reset filters

Settings
Now showing 1 - 10 of 52
  • Publication
    Lumped-element circuit modeling for composite Scaffold with Nano-Hydroxyapatite and Wangi Rice Starch
    ( 2023)
    Xiao Jian Tan
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Khor Shing Fhan
    ;
    Kim Yee Lee
    ;
    Kok Yeow You
    ;
    Che Wan Sharifah Robiah Mohamad
    Mechanistic studies of the interaction of electromagnetic (EM) fields with biomaterials has motivated a growing need for accurate models to describe the EM behavior of biomaterials exposed to these fields. In this paper, biodegradable bone scaffolds were fabricated using Wangi rice starch and nano-hydroxyapatite (nHA). The effects of porosity and composition on the fabricated scaffold were discussed via electrical impedance spectroscopy analysis. The fabricated scaffold was subjected to an electromagnetic field within the X-band and Ku-band (microwave spectrum) during impedance/dielectric measurement. The impedance spectra were analyzed with lumped-element models. The impedance spectra of the scaffold can be embodied in equivalent circuit models composed of passive components of the circuit, i.e., resistors, inductors and capacitors. It represents the morphological, structural and chemical characteristics of the bone scaffold. The developed models describe the impedance characteristics of plant tissue. In this study, it was found that the ε′ and ε″ of scaffold composites exhibited up and down trends over frequencies for both X-band and Ku-band. The circuit models presented the lowest mean percentage errors of Z′ and Z″, i.e., 3.60% and 13.80%, respectively.
  • Publication
    Lumped-element circuit modeling for composite scaffold with nano-hydroxyapatite and wangi rice starch
    ( 2023)
    Xiao Jian Tan
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Khor Shing Fhan
    ;
    Kim Yee Lee
    ;
    Kok Yeow You
    ;
    Che Wan Sharifah Robiah Mohamad
    Mechanistic studies of the interaction of electromagnetic (EM) fields with biomaterials has motivated a growing need for accurate models to describe the EM behavior of biomaterials exposed to these fields. In this paper, biodegradable bone scaffolds were fabricated using Wangi rice starch and nano-hydroxyapatite (nHA). The effects of porosity and composition on the fabricated scaffold were discussed via electrical impedance spectroscopy analysis. The fabricated scaffold was subjected to an electromagnetic field within the X-band and Ku-band (microwave spectrum) during impedance/dielectric measurement. The impedance spectra were analyzed with lumped-element models. The impedance spectra of the scaffold can be embodied in equivalent circuit models composed of passive components of the circuit, i.e., resistors, inductors and capacitors. It represents the morphological, structural and chemical characteristics of the bone scaffold. The developed models describe the impedance characteristics of plant tissue. In this study, it was found that the ε′ and ε″ of scaffold composites exhibited up and down trends over frequencies for both X-band and Ku-band. The circuit models presented the lowest mean percentage errors of Z′ and Z″, i.e., 3.60% and 13.80%, respectively.
  • Publication
    Dielectric properties of hydrothermally modified potato, corn, and rice starch
    ( 2022)
    Chong You Beh
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Khor Shing Fhan
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Kim Yee Lee
    The effect of starch granule sizes, shapes, composition, and frequency on the dielectric properties (dielectric constant, loss factor, and conductivity) of native and hydrothermally modified starches (potato, corn, and rice starch) are investigated in this work. Dielectric properties are determined from 5 Hz to 5 GHz. The modified starches exhibit lower dielectric properties than the native starches from 5 Hz to 5 GHz due to the disruption of the native polysaccharide’s molecular arrangement. The modified potato starch shows the highest loss factor (208.12 at 50 Hz and 19.95 at 500 Hz) and stable conductivity (~5.33 × 10−7 S/m at 50 Hz and 500 Hz) due to the larger continuous network structure after hydrothermal modification. The rice starch shows the largest difference in dielectric constant (47.30%) and loss factor (71.42%) between the modified form and native form in the frequency range of 5 MHz–5 GHz. This is due to the restriction of dipole motions in the closely packed structure after hydrothermal modification. The findings indicate that the quality of starch modification can be characterized by dielectric properties for assisting starch-based plastic production’s design.
  • Publication
    Complex impedance and modulus analysis on porous and non-porous scaffold composites due to effect of Hydroxyapatite/starch proportion
    ( 2023)
    Chong You Beh
    ;
    Cheng Ee Meng
    ;
    Xiao Jian Tan
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Khor Shing Fhan
    ;
    Kim Yee Lee
    ;
    Che Wan Sharifah Robiah Mohamad
    This study aims to investigate the electric responses (complex modulus and complex impedance analysis) of hydroxyapatite/starch bone scaffold as a function of hydroxyapatite/starch proportion and the microstructural features. Hence, the non-porous and porous hydroxyapatite/starch composites were fabricated with various hydroxyapatite/starch proportions (70/30, 60/40, 50/50, 40/60, 30/70, 20/80, and 10/90 wt/wt%). Microstructural analysis of the porous hydroxyapatite/starch composites was carried out by using scanning electron microscopy. It shows that the formation of hierarchical porous microstructures with high porosity is more significant at a high starch proportion. The complex modulus and complex impedance analysis were conducted to investigate the electrical conduction mechanism of the hydroxyapatite/starch composites via dielectric spectroscopy within a frequency range from 5 MHz to 12 GHz. The electrical responses of the hydroxyapatite/starch composites are highly dependent on the frequency, material proportion, and microstructures. High starch proportion and highly porous hierarchical microstructures enhance the electrical responses of the hydroxyapatite/starch composite. The material proportion and microstructure features of the hydroxyapatite/starch composites can be indirectly reflected by the simulated electrical parameters of the equivalent electrical circuit models.
  • Publication
    Regression analysis of the dielectric and morphological properties for porous Nanohydroxyapatite/Starch composites: a correlative study
    ( 2022)
    Chong You Beh
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Khor Shing Fhan
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Kim Yee Lee
    This paper aims to investigate the dielectric properties, i.e., dielectric constant (ε′), dielectric loss factor (ε″), dielectric tangent loss (tan δ), electrical conductivity (σ), and penetration depth (Dp), of the porous nanohydroxyapatite/starch composites in the function of starch proportion, pore size, and porosity over a broad band frequency range of 5 MHz–12 GHz. The porous nanohydroxyapatite/starch composites were fabricated using different starch proportions ranging from 30 to 90 wt%. The results reveal that the dielectric properties and the microstructural features of the porous nanohydroxyapatite/starch composites can be enhanced by the increment in the starch proportion. Nevertheless, the composite with 80 wt% of starch proportion exhibit low dielectric properties (ε′, ε″, tan δ, and σ) and a high penetration depth because of its highly interconnected porous microstructures. The dielectric properties of the porous nanohydroxyapatite/starch composites are highly dependent on starch proportion, average pore size, and porosity. The regression models are developed to express the dielectric properties of the porous nanohydroxyapatite/starch composites (R2 > 0.96) in the function of starch proportion, pore size, and porosity from 1 to 11 GHz. This dielectric study can facilitate the assessment of bone scaffold design in bone tissue engineering applications.
  • Publication
    Regression analysis of the dielectric and morphological properties for Porous Nanohydroxyapatite/Starch composites: a correlative study
    ( 2022)
    Chong You Beh
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Khor Shing Fhan
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Kim Yee Lee
    This paper aims to investigate the dielectric properties, i.e., dielectric constant (ε′), dielectric loss factor (ε″), dielectric tangent loss (tan δ), electrical conductivity (σ), and penetration depth (Dp), of the porous nanohydroxyapatite/starch composites in the function of starch proportion, pore size, and porosity over a broad band frequency range of 5 MHz–12 GHz. The porous nanohydroxyapatite/starch composites were fabricated using different starch proportions ranging from 30 to 90 wt%. The results reveal that the dielectric properties and the microstructural features of the porous nanohydroxyapatite/starch composites can be enhanced by the increment in the starch proportion. Nevertheless, the composite with 80 wt% of starch proportion exhibit low dielectric properties (ε′, ε″, tan δ, and σ) and a high penetration depth because of its highly interconnected porous microstructures. The dielectric properties of the porous nanohydroxyapatite/starch composites are highly dependent on starch proportion, average pore size, and porosity. The regression models are developed to express the dielectric properties of the porous nanohydroxyapatite/starch composites (R2 > 0.96) in the function of starch proportion, pore size, and porosity from 1 to 11 GHz. This dielectric study can facilitate the assessment of bone scaffold design in bone tissue engineering applications.
  • Publication
    Physical, thermal, and mechanical properties of highly porous polylactic acid/cellulose nanofibre scaffolds prepared by salt leaching technique
    ( 2021)
    Revati Radakisnin
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Mohd Faizal Mat Tahir
    ;
    Cheng Ee Meng
    ;
    Hassan Al Alshahrani
    This study aimed to prepare and characterise polylactic acid (PLA) reinforced with cellulose nanofibre (CNF) from a Pennisetum purpureum-based composite scaffold and determine its structural and mechanical properties. Porous scaffolds with CNF compositions of 5‒20 wt% in the PLA matrix were developed using solvent casting and particulate leaching of its porogen at 90 wt% of loadings. Morphology studies using field emission scanning electron microscopy revealed that the scaffolds had well-interconnected pores with an average pore size range of 67‒137 µm and porosity >76%. X-ray diffraction confirmed the interconnectivity and homogeneity of the pores and the fibrous structure of the scaffolds. The compressive strength of the fabricated scaffolds varied between 2.34 and 6.66 MPa, while their compressive modulus was between 1.95 and 6.04 MPa for various CNF contents. Furthermore, water absorption and thermal degradation studies showed that the scaffold had good hydrophilicity and improved thermal stability. These findings highlight the need to modify the pore structure and mechanical performance simultaneously for tissue engineering. Thus, this study concludes that the developed PLA scaffolds reinforced with CNF from Pennisetum purpureum are potential candidates for cell attachment and extracellular matrix generation.
  • Publication
    Dielectric and biodegradation properties of biodegradable nano-hydroxyapatite/starch bone scaffold
    ( 2022)
    Beh Chong You
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Khor Shing Fhan
    ;
    Eng Swee Kheng
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    This study is aim to investigate the dielectric properties (dielectric constant, ε′ and loss factor, ε′′) and the biodegradation properties of the nano-hydroxyapatite/starch bone scaffold with various starch proportion in simulated body fluid. The nano-hydroxyapatite/starch bone scaffolds with starch proportions 30, 40, 50, 60, 70, 80, and 90 wt.% were fabricated. The ε′ and ε′′ of nano-hydroxyapatite/starch composite decrease when frequency increases. However, it increases when starch proportion and temperature increase. The biodegradation properties of the nano-hydroxyapatite/starch bone scaffold can be improved when the dielectric properties and porosity are enhanced. The enhancement of dielectric properties and porosity is due to the increment of starch proportion. The nano-hydroxyapatite/starch bone scaffold with the high starch proportion exhibits nano-hydroxyapatite/starch interfaces with strong intermolecular interactions that can stabilize biodegradation and biomineralization. The dielectric properties of the simulated body solutions are highly sensitive to the variation of the ion concentrations (calcium and phosphate). The nano-hydroxyapatite/starch bone scaffold with 80 wt.% starch proportion exhibits significant dielectric and biodegradation properties. It has potential to be a biodegradable inorganic/organic bone scaffold.
  • Publication
    Development of a symmetric ring junction as a four-port reflectometer for complex reflection coefficient measurements
    ( 2015)
    K. Y. Lee
    ;
    B. K. Chung
    ;
    K. Y. You
    ;
    Cheng Ee Meng
    ;
    Z. Abbas
    Six-port reflectometer is well-known for its ability to measure magnitude and phase-shift of microwave signal using four power detectors that perform magnitudeonly measurements. This paper presents the development of an innovative symmetric ring junction as four-port reflectometer for complex reflection coefficient measurements. It reduces the number of required detectors to two. Design optimization, new calibration modeling and algorithm are discussed in details for this four-port reflectometer. The developed four-port reflectometer is compared to five-port reflectometer and vector network analyzer. It is found that the measured magnitude and phase-shift show good performance in comparison with the commercial vector network analyzer and the five-port reflectometer.
  • Publication
    Damage self-sensing and strain monitoring of glass-reinforced epoxy composite impregnated with graphene nanoplatelet and multiwalled carbon nanotubes
    ( 2022)
    Mohammad Asraf Alif Ahmad
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohamad Reda A. Refaai
    ;
    Cheng Ee Meng
    ;
    Maslinda Abu Bakar @ Yahaya
    The damage self-sensing and strain monitoring of glass-reinforced epoxy composites impregnated with graphene nanoplatelets (GNPs) and multiwalled carbon nanotubes (MWCNTs) were investigated. Hand lay-up and vacuum bagging methods were used to fabricate the composite. Mechanical stirrer, high shear mixer, and ultrasonic probe were used to mix the nanofiller and epoxy. The loadings of the nanofiller used were 0.5, 1.5, 3, and 5 wt%. The specimens were tested using in situ electromechanical measurements under mechanical tests. The results show that the type and weight content of the nanofiller affect the electrical properties, damage self-sensing behaviour, and mechanical properties of the composites. The electrical conductivity of the GNP-glass and MWCNT-glass composites increased with nanofiller content. The tensile and flexural strengths of the composite improved with the addition of GNP and MWCNT nanofillers from 0.5 to 3 wt%. The 3 wt% nanofiller loading for GNP and MWCNT produces better mechanical–electrical performance. Field emission scanning electron microscopy revealed the dispersion of GNP and MWCNT nanofillers in the composites.