Masitah Hasan
Thumbnail Image
Preferred name
Masitah Hasan
Official Name
Masitah, Hasan
Alternative Name
Hasan, Masitah
Masitah, H.
Main Affiliation
Scopus Author ID
57217411844
Researcher ID
HLU-8488-2023

Research Output

Filters

5
5
Reset filters

Settings
Now showing 1 - 5 of 5
  • Publication
    Microplastics in facial cleanser: extraction, identification, potential toxicity, and continuous-flow removal using agricultural waste–based biochar
    ( 2023-05-01)
    Hanif M.A.
    ;
    Naimah Ibrahim
    ;
    Farrah Aini Dahalan
    ;
    Umi Fazara Md Ali
    ;
    Masitah Hasan
    ;
    Ayu Wazira Azhari
    ;
    Jalil A.A.
    Microplastic (MP) is an emerging contaminant of concern due to its ubiquitous quantity in the environment, small size, and potential toxicity due to strong affinity towards other contaminants. In this work, MP particles (5–300 μm) were extracted from a commercial facial cleanser and determined to be irregular polyethylene (PE) microbeads based on characterization with field emission scanning electron microscopy (FESEM) and Raman spectroscopy. The potential of extracted MP acting as toxic pollutants’ vector was analyzed via adsorption of methylene blue and methyl orange dye where significant dye uptake was observed. Synthetic wastewater containing the extracted MP was subjected to a continuous-flow column study using palm kernel shell and coconut shell biochar as the filter/adsorbent media. The prepared biochar was characterized via proximate and ultimate analysis, FESEM, contact angle measurement, atomic force microscopy (AFM), and Fourier transform infrared (FTIR) spectroscopy to investigate the role of the biochar properties in MP removal. MP removal performance was determined by measuring the turbidity and weighing the dry mass of particles remaining in the effluent following treatment. Promising results were obtained from the study with highest removal of MP (96.65%) attained through palm kernel shell biochar with particle size of 0.6–1.18 mm and continuous-flow column size of 20 mm. Graphical abstract: [Figure not available: see fulltext.].
      7  38
  • Publication
    Column-based removal of high concentration microplastics in synthetic wastewater using granular activated carbon
    ( 2023-01-01)
    Amirah Mohd Napi N.n.
    ;
    Naimah Ibrahim
    ;
    Adli Hanif M.
    ;
    Masitah Hasan
    ;
    Farrah Aini Dahalan
    ;
    Syafiuddin A.
    ;
    Boopathy R.
    Microplastic (MP) is an emerging contaminant of concern due to its abundance in the environment. Wastewater treatment plant (WWTP) can be considered as one of the main sources of microplastics in freshwater due to its inefficiency in the complete removal of small MPs. In this study, a column-based MP removal which could serve as a tertiary treatment in WWTPs is evaluated using granular activated carbon (GAC) as adsorbent/filter media, eliminating clogging problems commonly caused by powder form activated carbon (PAC). The GAC is characterized via N2 adsorption–desorption isotherm, field emission scanning electron microscopy, and contact angle measurement to determine the influence of its properties on MP removal efficiency. MPs (40–48 μm) removal up to 95.5% was observed with 0.2 g/L MP, which is the lowest concentration tested in this work, but still higher than commonly used MP concentration in other studies. The performance is reduced with further increase in MP concentration (up to 1.0 g/L), but increasing the GAC bed length from 7.5 to 17.5 cm could lead to better removal efficiencies. MP particles are immobilized by the GAC predominantly by filtration process by being entangled with small GAC particles/chips or stuck between the GAC particles. MPs are insignificantly removed by adsorption process through entrapment in GAC porous structure or attachment onto the GAC surface.
      1
  • Publication
    Microplastics and nanoplastics: Recent literature studies and patents on their removal from aqueous environment
    ( 2022-03-01)
    Hanif M.A.
    ;
    Naimah Ibrahim
    ;
    Farrah Aini Dahalan
    ;
    Umi Fazara Md Ali
    ;
    Masitah Hasan
    ;
    Jalil A.A.
    The presence of microplastics (MP) and nanoplastics (NP) in the environment poses significant hazards towards microorganisms, humans, animals and plants. This paper is focused on recent literature studies and patents discussing the removal process of these plastic pollutants. Microplastics and nanoplastics can be quantified by counting, weighing, absorbance and turbidity and can be further analyzed using scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, surface-enhanced Raman spectroscopy and Raman tweezers. Mitigation methods reported are categorized depending on the removal characteristics: (i) Filtration and separation method: Filtration and separation, electrospun nanofiber membrane, constructed wetlands; (ii) Capture and surface attachment method: coagulation, flocculation and sedimentation (CFS), electrocoagulation, adsorption, magnetization, micromachines, superhydrophobic materials and microorganism aggregation; and (iii) Degradation method: photocatalytic degradation, microorganism degradation and thermal degradation; where removal efficiency between 58 and 100% were reported. As these methods are significantly distinctive, the parameters which affect the MP/NP removal performance e.g., pH, type of plastics, presence of interfering chemicals or ions, surface charges etc. are also discussed. 42 granted international patents related to microplastics and nanoplastics removal are also reviewed where the majority of these patents are focused on separation or filtration devices. These devices are efficient for microplastics up to 20 μm but may be ineffective for nanoplastics or fibrous plastics. Several patents were found to focus on methods similar to literature studies e.g., magnetization, CFS, biofilm and microorganism aggregation; with the addition of another method: thermal degradation.
      36  2
  • Publication
    Microplastics and nanoplastics: Recent literature studies and patents on their removal from aqueous environment
    ( 2022-03-01)
    Muhammad Adli Hanif
    ;
    Naimah Ibrahim
    ;
    Farrah Aini Dahalan
    ;
    Umi Fazara Md Ali
    ;
    Masitah Hasan
    ;
    Jalil A.A.
    The presence of microplastics (MP) and nanoplastics (NP) in the environment poses significant hazards towards microorganisms, humans, animals and plants. This paper is focused on recent literature studies and patents discussing the removal process of these plastic pollutants. Microplastics and nanoplastics can be quantified by counting, weighing, absorbance and turbidity and can be further analyzed using scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, surface-enhanced Raman spectroscopy and Raman tweezers. Mitigation methods reported are categorized depending on the removal characteristics: (i) Filtration and separation method: Filtration and separation, electrospun nanofiber membrane, constructed wetlands; (ii) Capture and surface attachment method: coagulation, flocculation and sedimentation (CFS), electrocoagulation, adsorption, magnetization, micromachines, superhydrophobic materials and microorganism aggregation; and (iii) Degradation method: photocatalytic degradation, microorganism degradation and thermal degradation; where removal efficiency between 58 and 100% were reported. As these methods are significantly distinctive, the parameters which affect the MP/NP removal performance e.g., pH, type of plastics, presence of interfering chemicals or ions, surface charges etc. are also discussed. 42 granted international patents related to microplastics and nanoplastics removal are also reviewed where the majority of these patents are focused on separation or filtration devices. These devices are efficient for microplastics up to 20 μm but may be ineffective for nanoplastics or fibrous plastics. Several patents were found to focus on methods similar to literature studies e.g., magnetization, CFS, biofilm and microorganism aggregation; with the addition of another method: thermal degradation.
      2  32
  • Publication
    Effect of Aeration Rate on Specific Oxygen Uptake Rate (SOUR) in Treating Chemical Oxygen Demand (COD) in Domestic Wastewater
    ( 2024-01-01)
    Zubir A.A.A.
    ;
    Farrah Aini Dahalan
    ;
    Kamarudin N.S.
    ;
    Naimah Ibrahim
    ;
    Ong Soon An
    ;
    Nabilah Aminah Lutpi
    ;
    Masitah Hasan
    ;
    Nor Azizah Parmin
    Specific oxygen uptake rate (SOUR) is significant parameter to determine the microbial activity and examined the effluent quality in biological wastewater treatment. Chemical oxygen demand (COD) is the major indicator in monitoring the effluent quality in relation on its removal mainly depends on the microbial activity in the activated sludge. So, this research is conducted to study the effect of aeration rate on SOUR and determined the best oxygen requirement in removing COD in domestic wastewater. The procedure was carried out by using domestic wastewater as the seed sludge in sequencing batch reactor. The reactor with working volume of 2L was operating 6 cycles in 24 hours with five phases (feeding, aeration, settle, draw and idle). The aeration time is fixed to 2.5 hours. The dissolved oxygen and COD readings were recorded with four types of aeration rate adjusted at 1L, 2L, 3L and 4L / min daily for 7 days. The result indicates that, 3L/min gives the highest SOUR which reflects that the high activity of microbial in this condition. Besides, the effluent also shows the highest COD removal efficiency on 3L/min of aeration rate. So, as a conclusion the best oxygen requirement for the microbial to carry out their activities on aeration rate of 3L/min.
      10  36