Hasliza A Rahim @ Samsuddin
Thumbnail Image
Preferred name
Hasliza A Rahim @ Samsuddin
Official Name
A Rahim @ Samsuddin, Hasliza
Alternative Name
A. Rahim, Hasliza
Rahim, Hasliza A.
Rahim Samsuddin, H. A.
Rahim, Hasliza Abdul
Rahim, Hazliza A.
Rahim, H. A.
Rahim, H.
Hasliza,
Rahim H, Abd
RahimAtSamusuddin, Hasliza A.
A Rahim, Hasliza
Rahim At Samsuddin, Hasliza A.
ARahim, H.
Rahim Samsuddin, A. Hasliza
Rahim At Samsuddin, H. A.
Rahim, Hasliza Abd
Rahim, Hasliza
Rahim At Shamsuddin, H. A.
Main Affiliation
Scopus Author ID
57202496362
Researcher ID
ABE-3328-2020

Research Output

Filters

43
Reset filters

Settings
Now showing 1 - 10 of 43
  • Publication
    Green Nanocomposite-Based metamaterial electromagnetic absorbers: Potential, current developments and future perspectives
    ( 2020)
    Nurul Fatihah Nabila Yah
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Mohdfareq Abdulmalek
    ;
    Soh Ping Jack
    ;
    R. Badlishah, Ahmad
    ;
    Muzammil Jusoh
    ;
    Lee Yeng Seng
    ;
    Mohd Haizal Jamaluddin
    ;
    Mohd Najib Mohd Yasin
  • Publication
    Electrically tunable Left-Handed textile metamaterial for microwave applications
    ( 2021)
    Kabir Hossain
    ;
    Thennarasan Sabapathy
    ;
    Muzammil Jusoh
    ;
    Ping Jack Soh
    ;
    Mohd Haizal Jamaluddin
    ;
    Samir Salem Al-Bawri
    ;
    Mohamed Nasrun Osman
    ;
    R. Badlishah, Ahmad
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Mohd Najib Mohd Yasin
    ;
    Nitin Saluja
    An electrically tunable, textile-based metamaterial (MTM) is presented in this work. The proposed MTM unit cell consists of a decagonal-shaped split-ring resonator and a slotted ground plane integrated with RF varactor diodes. The characteristics of the proposed MTM were first studied independently using a single unit cell, prior to different array combinations consisting of 1 × 2, 2 × 1, and 2 × 2 unit cells. Experimental validation was conducted for the fabricated 2 × 2 unit cell array format. The proposed tunable MTM array exhibits tunable left-handed characteristics for both simulation and measurement from 2.71 to 5.51 GHz and provides a tunable transmission coefficient of the MTM. Besides the left-handed properties within the frequency of interest (from 1 to 15 GHz), the proposed MTM also exhibits negative permittivity and permeability from 8.54 to 10.82 GHz and from 10.6 to 13.78 GHz, respectively. The proposed tunable MTM could operate in a dynamic mode using a feedback system for different microwave wearable applications.
  • Publication
    Bending Assessment of Dual-band Split Ring-shaped and Bar Slotted All-Textile Antenna for Off-body WBAN/WLAN and 5G Applications
    ( 2020-09-28)
    Mashaghba H.A.
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Soh Ping Jack
    ;
    Abdulmalek M.
    ;
    Ismahayati Adam
    ;
    Muzammil Jusoh
    ;
    Thennarasan Sabapathy
    ;
    Mohd Najib Mohd Yasin
    ;
    Khairul Najmy Abdul Rani
    This paper presents a dual-band split ring-shaped and bar slotted textile antenna for potential WBAN/WLAN and 5G applications. The antenna is made using textiles and features a full ground plane to possibly alleviate coupling to the human body. The overall size of the antenna is 70 x 70 mm2, with a patch sized at 47.2 x 31 mm2 0.472 \lambda \times 0.031 \lambda. The antenna is made using ShieldIt Super as its conductive textile and felt as its substrate. To enable its dual-band resonance at 2.45 and 3.5 GHz a split ring-shaped and bar slots are integrated onto the patch. The proposed antenna is evaluated when bent under different radii and at different axes to estimate its performance in terms of reflection coefficient, bandwidth, efficiency and gain. A 10-dB impedance bandwidth of 57 % or 135 MHz (from 2.39 to 2.52 GHz) and 70 % or 240 MHz (from 3.45 to 3.56 GHz) are obtained when evaluated in the planar /bent configuration. The maximum realized gain is 6 dBi for at 3.5 GHz. These performances indicate that the antenna proposed in this work can be potentially improved for applications in WBAN/WLAN and 5G bands.
  • Publication
    Flexible Co-Planar Waveguide (CPW)-Fed Y-Shaped Patch UWB Antenna for Off-Body Communication
    ( 2020-03-18)
    Kassim S.
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Soh Ping Jack
    ;
    Abdulmalek M.
    ;
    Muzammil Jusoh
    ;
    Jamaluddin M.H.
    ;
    Sabli N.S.
    ;
    Yassin M.N.
    ;
    Thennarasan Sabapathy
    ;
    Wee Fwen Hoon
    ;
    Mohamed Nasrun Osman
    ;
    Ismail N.
    This paper intends to design an Ultra-Wideband (UWB) antenna for future Internet of Things (IoT) applications for off-body Wireless Body Area Networks (WBAN) communication. An antenna based on the Y-shaped patch fed using co-planar waveguide (CPW) line, with a full ground plane is designed. It is implemented on two different substrates, namely a 5mm thick Rogers RO4350B and a 5-mm-thick felt textile. Parametric analysis of antenna is performed by changing its critical dimensions and monitoring parameters such as gain, bandwidth, efficiency, radiation pattern when using both substrates. Besides that, the bending effects towards reflection coefficient and radiation patterns are also studied. The final patch size with the Y-shaped slot is 36 × 40 mm2 for both substrates. The antenna is capable of providing coverage for the bands from 8 to 10 GHz. Finally, the antenna designed on RO4350B substrate outperforms the antenna designed on felt by about four times in terms of bandwidth, with 3.3 GHz (7.7-11 GHz).
  • Publication
    Multi-stage feature selection (MSFS) algorithm for UWB-based early breast cancer size prediction
    ( 2020-08-01)
    Vijayasarveswari V.
    ;
    Allan Melvin Andrew
    ;
    Muzammil Jusoh
    ;
    Thennarasan Sabapathy
    ;
    Rafikha Aliana A Raof
    ;
    Mohd Najib Mohd Yasin
    ;
    R Badlishah Ahmad
    ;
    Khatun S.
    ;
    Hasliza A Rahim @ Samsuddin
    Breast cancer is the most common cancer among women and it is one of the main causes of death for women worldwide. To attain an optimum medical treatment for breast cancer, an early breast cancer detection is crucial. This paper proposes a multistage feature selection method that extracts statistically significant features for breast cancer size detection using proposed data normalization techniques. Ultra-wideband (UWB) signals, controlled using microcontroller are transmitted via an antenna from one end of the breast phantom and are received on the other end. These ultra-wideband analogue signals are represented in both time and frequency domain. The preprocessed digital data is passed to the proposed multistage feature selection algorithm. This algorithm has four selection stages. It comprises of data normalization methods, feature extraction, data dimensional reduction and feature fusion. The output data is fused together to form the proposed datasets, namely, 8-HybridFeature, 9-HybridFeature and 10-HybridFeature datasets. The classification performance of these datasets is tested using the Support Vector Machine, Probabilistic Neural Network and Naïve Bayes classifiers for breast cancer size classification. The research findings indicate that the 8-HybridFeature dataset performs better in comparison to the other two datasets. For the 8-HybridFeature dataset, the Naïve Bayes classifier (91.98%) outperformed the Support Vector Machine (90.44%) and Probabilistic Neural Network (80.05%) classifiers in terms of classification accuracy. The finalized method is tested and visualized in the MATLAB based 2D and 3D environment.
  • Publication
    Smart Gateless System using RFID Technology in Universiti Malaysia Perlis
    ( 2021-06-11)
    Ainur Fasihah Mohd Fazilah
    ;
    Muzammil Jusoh
    ;
    Zakaria A.
    ;
    Thennarasan Sabapathy
    ;
    Ibrahim M.F.
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Azizan M.M.
    ;
    Mohd Zakimi Zakaria
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Albreem M.A.M.
    ;
    R Badlishah Ahmad
    This paper describes a smart monitoring gate-less system by using RFID technologies that had been implemented in Universiti Malaysia Perlis. The objective of this system is to ease the security to monitoring the cars-in and cars-out from the main gate manually. The security can check and manage the staff by system management in PC. This smart monitoring gate-less system consists of RFID tag antenna that be attached at sticker's staff, RFID reader and software management application. For the software management application, this project used LabView as a simulation tool for the data acquisition. The data which contains of name, staff number, number plate, car model and color will be stored in cloud-based storage. All the information data can be accessed from any location because the security management can access it through mobile. This project will present how efficient the vehicle control application on campus which enable the security guard to check a car sticker either legal or illegal in a shortest way.
  • Publication
    UWB Antenna with Artificial Magnetic Conductor (AMC) for 5G Applications
    ( 2020-01-01)
    Syuhaimi Kassim
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Abdulmalek M.
    ;
    R Badlishah Ahmad
    ;
    Jamaluddin M.H.
    ;
    Muzammil Jusoh
    ;
    Mohsin D.A.
    ;
    Yahya N.Z.
    ;
    Wee Fwen Hoon
    ;
    Ismahayati Adam
    ;
    Rani K.N.A.
    This paper presents the design of an ultra-wideband (UWB) antenna for Internet of Things (IoT) applications that operate within 5G operating frequencies. One of the IoT-based devices’ architecture is wireless body area networks (WBANs). WBAN allows computer device to communicate with human body signal by trading digital information like electrical conductivity. Fifth generation (5G) is the state-of-the-art generation mobile communication. A higher data speed it offers will improve data communication efficiency in WBAN system. One of the biggest challenges foreseen for the wearable UWB antenna is the antenna bandwidth. The challenge is to warrant a wideband performance throughout the operating frequency, and a trade-off with a high dielectric in proposed substrate is essential. This paper presents design and parametric analysis of an antenna using a typical industry-preferred Rogers material (RO4350B) substrate with wider bandwidth as compared to 5G frequencies, 10.125–10.225 GHz. This paper also exhibits bandwidth improvement with the presence of artificial magnetic conductor (AMC) as a metasurface. A typical UWB patch antenna was initially designed before being integrated with AMC through a parametric analysis. This paper analyzes the frequency, gain, directivity and antenna efficiency before and after optimization. This paper successfully demonstrates a slotted Y-shaped antenna design with coplanar waveguide (CPW) using a Rogers material (RO4350B) as a substrate and the bandwidth improvement by 15.6% with the AMC as a metasurface.
  • Publication
    A hybrid modified method of the sine cosine algorithm using latin hypercube sampling with the cuckoo search algorithm for optimization problems
    ( 2020-11-01)
    Rosli S.J.
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Khairul Najmy Abdul Rani
    ;
    Ruzelita Ngadiran
    ;
    R Badlishah Ahmad
    ;
    Yahaya N.Z.
    ;
    Abdulmalek M.
    ;
    Muzammil Jusoh
    ;
    Mohd Najib Mohd Yasin
    ;
    Thennarasan Sabapathy
    ;
    Allan Melvin Andrew
    The metaheuristic algorithm is a popular research area for solving various optimization problems. In this study, we proposed two approaches based on the Sine Cosine Algorithm (SCA), namely, modification and hybridization. First, we attempted to solve the constraints of the original SCA by developing a modified SCA (MSCA) version with an improved identification capability of a random population using the Latin Hypercube Sampling (LHS) technique. MSCA serves to guide SCA in obtaining a better local optimum in the exploitation phase with fast convergence based on an optimum value of the solution. Second, hybridization of the MSCA (HMSCA) and the Cuckoo Search Algorithm (CSA) led to the development of the Hybrid Modified Sine Cosine Algorithm Cuckoo Search Algorithm (HMSCACSA) optimizer, which could search better optimal host nest locations in the global domain. Moreover, the HMSCACSA optimizer was validated over six classical test functions, the IEEE CEC 2017, and the IEEE CEC 2014 benchmark functions. The effectiveness of HMSCACSA was also compared with other hybrid metaheuristics such as the Particle Swarm Optimization–Grey Wolf Optimization (PSOGWO), Particle Swarm Optimization–Artificial Bee Colony (PSOABC), and Particle Swarm Optimization–Gravitational Search Algorithm (PSOGSA). In summary, the proposed HMSCACSA converged 63.89% faster and achieved a shorter Central Processing Unit (CPU) duration by a maximum of up to 43.6% compared to the other hybrid counterparts.
  • Publication
    Electrically tunable left-handed textile metamaterial for microwave applications
    ( 2021-03-01)
    Hossain K.
    ;
    Thennarasan Sabapathy
    ;
    Muzammil Jusoh
    ;
    Soh Ping Jack
    ;
    Jamaluddin M.H.
    ;
    Al-Bawri S.S.
    ;
    Osman M.N.
    ;
    R Badlishah Ahmad
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Yasin M.N.M.
    ;
    Saluja N.
    An electrically tunable, textile-based metamaterial (MTM) is presented in this work. The proposed MTM unit cell consists of a decagonal-shaped split-ring resonator and a slotted ground plane integrated with RF varactor diodes. The characteristics of the proposed MTM were first studied independently using a single unit cell, prior to different array combinations consisting of 1 × 2, 2 × 1, and 2 × 2 unit cells. Experimental validation was conducted for the fabricated 2 × 2 unit cell array format. The proposed tunable MTM array exhibits tunable left-handed characteristics for both simulation and measurement from 2.71 to 5.51 GHz and provides a tunable transmission coefficient of the MTM. Besides the left-handed properties within the frequency of interest (from 1 to 15 GHz), the proposed MTM also exhibits negative permittivity and permeability from 8.54 to 10.82 GHz and from 10.6 to 13.78 GHz, respectively. The proposed tunable MTM could operate in a dynamic mode using a feedback system for different microwave wearable applications.
  • Publication
    Flexible UWB Compact Circular Split-Ring Slotted Wearable Textile Antenna for Off-Body Millimetre-Wave 5G Mobile Communication
    ( 2020-01-01)
    Lee H.W.
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Abdulmalek M.
    ;
    R Badlishah Ahmad
    ;
    Jamaluddin M.H.
    ;
    Muzammil Jusoh
    ;
    Mohsin D.A.
    ;
    Wee Fwen Hoon
    ;
    Ismahayati Adam
    ;
    Yahya N.Z.
    ;
    Khairul Najmy Abdul Rani
    A flexible ultra-wideband (UWB) compact circular split-ring slotted wearable textile antenna for off-body 28 GHz fifth-generation (5G) mobile communication is proposed. The proposed antenna is implemented using low-cost felt textile substrates and copper. The proposed 5G wearable antenna of compact circular split-ring slotted with enhanced bandwidth of 0.5% with the resonance frequency of 28 GHz is presented. The S11 for patch antenna with slot exhibited 43.4% more than the patch antenna without slot. The results also exhibited that the bending angle of 10° and 20° perform better return loss than in flat condition, up to 14% for patch antenna with slot against without the slot.