Options
Wong Yee Shian
Preferred name
Wong Yee Shian
Official Name
Wong, Yee Shian
Alternative Name
Wong, Yee-Shian
Wong, Y. S.
Wong, Yee Shian
Yee-Shian, Wong
Y S Wong
Main Affiliation
Scopus Author ID
56004092100
Researcher ID
M-6006-2015
Now showing
1 - 3 of 3
-
PublicationHybrid system of photocatalytic fuel cell and Fenton process for electricity generation and degradation of Reactive Black 5( 2017-01-01)
;Noradiba Nordin ; ; ; ; ;Lee Sin Li ;Oon Yoong SinOon Yoong LingA novel hybrid system composed of a photocatalytic fuel cell (PFC) and Fenton reactor was developed with the aim to degrade the azo dye Reactive Black 5 (RB5) and generate electricity. Compared to previously established system of bioelectro-Fenton system, microbial fuel cell (MFC) system has significant challenge in the development and operation system. Therefore, PFC is used instead of MFC to generate electrons for the Fenton system. The effect of azo dye (RB5) on each PFC and Fenton reactor was investigated. The experimental results showed that maximum power output was achieved in the absence of dye in the Fenton reactor of this hybrid system. Furthermore, higher degradation efficiency of RB5 could also be observed in the PFC reactor in this hybrid system. -
PublicationInfluence of Amaranth dye concentration on the efficiency of hybrid system of photocatalytic fuel cell and Fenton process( 2017-10-01)
;Noradiba Nordin ; ; ; ; ;Sin Li Lee ;Oon Yoong SinOon Yoong LingA novel sustainable hybrid system of photocatalytic fuel cell (PFC) and Fenton process is an alternative wastewater treatment technology for energy-saving and efficient treatment of organic pollutants. The electrons generated from PFC photoanode are used to produce H2O2 in the Fenton reactor and react with the in situ generation of Fe2+ from sacrificial iron for hydroxyl radical formation. In this study, the effect of different initial Amaranth dye concentrations on degradation and electricity generation were investigated. ZnO/Zn photoanode was prepared by anodizing method and characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). Results revealed that the maximum power density (9.53 mW/m2) and current density (0.0178 mA/m2) were achieved at 10 mg/L of Amaranth. The correlation between dye degradation, voltage output, and kinetic photocatalytic degradation were also investigated and discussed.1 35 -
PublicationRevealing the influences of functional groups in azo dyes on the degradation efficiency and power output in solar photocatalytic fuel cell( 2020-12-01)
;Khalik, Wan Fadhilah ; ; ;Yusoff N.A. ;Lee, Sin-LiIn this study, the degradation efficiency and electricity generation of the azo dyes affected by the functional groups and molecular structure in a solar photocatalytic fuel cell (PFC) system were investigated and discussed in detail. Four different azo dyes such as, Acid Orange 7 (AO7), Acid Red 18 (AR18), Reactive Black 5 (RB5), Reactive Red 120 (RR120) with different molecular structure were evaluated. The degradation efficiency of AO7, AR18, RB5 and RR120 achieved 5.6 ± 0.3%, 11.1 ± 0.6%, 41.9 ± 0.9% and 52.1 ± 1.3%, respectively, after 6 h irradiated under solar light. In addition, the maximum power density, Pmax for AO7, AR18, RB5 and RR120 was 0.0269 ± 0.01, 0.111 ± 0.03, 1.665 ± 0.67 and 4.806 ± 1.79 mW cm−2, respectively. Meanwhile, the concentration of COD for AO7, AR18, RB5 and RR120 reduced to 16 ± 0.1, 10 ± 0.3, 7 ± 0.6 and 3 ± 0.9 mg L−1, respectively. The concentration ratio of benzene / naphthalene, benzene / azo bond and naphthalene / azo bond, respectively, was analyzed to investigate the impact of the functional groups over photodegradation of the azo dyes in PFC. Electron releasing groups (-OH and –NH2) and electron withdrawing groups (-SO3Na) which attached to the naphthalene or benzene ring also played a pivotal role in the degradation mechanism.2 23