Mohd Ridzuan Mohd Jamir
Thumbnail Image
Preferred name
Mohd Ridzuan Mohd Jamir
Official Name
Mohd Ridzuan , Mohd Jamir
Alternative Name
Ridzuan Mohd Jamir, Mohd
M Ridzuan, M. J.
Ridzuan, M. J.M.
Mohd Jamir, Mohd Ridzuan
Jamir, Mohd Ridzuan Mohd
Main Affiliation
Scopus Author ID
36069815000
Researcher ID
H-9343-2012

Research Output

Filters

1
10
Reset filters

Settings
Now showing 1 - 10 of 10
  • Publication
    Regression analysis of the dielectric and morphological properties for porous Nanohydroxyapatite/Starch composites: a correlative study
    ( 2022)
    Chong You Beh
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Khor Shing Fhan
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Kim Yee Lee
    This paper aims to investigate the dielectric properties, i.e., dielectric constant (ε′), dielectric loss factor (ε″), dielectric tangent loss (tan δ), electrical conductivity (σ), and penetration depth (Dp), of the porous nanohydroxyapatite/starch composites in the function of starch proportion, pore size, and porosity over a broad band frequency range of 5 MHz–12 GHz. The porous nanohydroxyapatite/starch composites were fabricated using different starch proportions ranging from 30 to 90 wt%. The results reveal that the dielectric properties and the microstructural features of the porous nanohydroxyapatite/starch composites can be enhanced by the increment in the starch proportion. Nevertheless, the composite with 80 wt% of starch proportion exhibit low dielectric properties (ε′, ε″, tan δ, and σ) and a high penetration depth because of its highly interconnected porous microstructures. The dielectric properties of the porous nanohydroxyapatite/starch composites are highly dependent on starch proportion, average pore size, and porosity. The regression models are developed to express the dielectric properties of the porous nanohydroxyapatite/starch composites (R2 > 0.96) in the function of starch proportion, pore size, and porosity from 1 to 11 GHz. This dielectric study can facilitate the assessment of bone scaffold design in bone tissue engineering applications.
  • Publication
    The effect of stacking sequence on fatigue behaviour of hybrid pineapple leaf fibre/carbon-fibre-reinforced epoxy composites
    ( 2021)
    Mohd Khairul Rabani Hashim
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Farizul Hafiz Kasim
    ;
    Mohamed Thariq Hameed Sultan
    ;
    Ain Umaira Md Shah
    ;
    Kamarul Arifin Ahmad
    ;
    Adi Azriff Basri
    This study examined the fatigue behaviour of pineapple leaf fibre/carbon hybrid laminate composites under various stacking sequences. The vacuum infusion technique was used to fabricate the symmetric quasi-isotropic oriented laminates, in which the stacking was varied. The laminate was tested under static and fatigue tensile load according to ASTM D3039-76 and ASTM D3479-96, respectively. Maximum tensile strength and modulus of 119.34 MPa and 6.86 GPa, respectively, were recorded for the laminate with external PALF ply and internal carbon ply oriented at [± 45°2, 0°/90°2]s (PCCP_45090). The fatigue tests showed that PCCP_45090 and CPPC_09045 (with internal PALF ply and external carbon ply oriented at [0°/90°2, ± 45°2]s) exhibited a higher useful life, especially at the high-stress level of the ultimate tensile strength. The normalised stress against the number of cycles showed that the stacking sequences of different ply orientations affected the fatigue behaviour more than the stacking sequences of the material. The laminate stacking sequence significantly affected the hysteresis energy and stiffness evolution. The scanning electron microscopy images showed that the fatigue failure modes included fibre pull-out, fibre breakage, matrix cracking, debonding, and delamination. The study concluded that PCCP_45090 exhibited an outstanding fatigue performance.
  • Publication
    Regression analysis of the dielectric and morphological properties for Porous Nanohydroxyapatite/Starch composites: a correlative study
    ( 2022)
    Chong You Beh
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Khor Shing Fhan
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Kim Yee Lee
    This paper aims to investigate the dielectric properties, i.e., dielectric constant (ε′), dielectric loss factor (ε″), dielectric tangent loss (tan δ), electrical conductivity (σ), and penetration depth (Dp), of the porous nanohydroxyapatite/starch composites in the function of starch proportion, pore size, and porosity over a broad band frequency range of 5 MHz–12 GHz. The porous nanohydroxyapatite/starch composites were fabricated using different starch proportions ranging from 30 to 90 wt%. The results reveal that the dielectric properties and the microstructural features of the porous nanohydroxyapatite/starch composites can be enhanced by the increment in the starch proportion. Nevertheless, the composite with 80 wt% of starch proportion exhibit low dielectric properties (ε′, ε″, tan δ, and σ) and a high penetration depth because of its highly interconnected porous microstructures. The dielectric properties of the porous nanohydroxyapatite/starch composites are highly dependent on starch proportion, average pore size, and porosity. The regression models are developed to express the dielectric properties of the porous nanohydroxyapatite/starch composites (R2 > 0.96) in the function of starch proportion, pore size, and porosity from 1 to 11 GHz. This dielectric study can facilitate the assessment of bone scaffold design in bone tissue engineering applications.
  • Publication
    The effect of stacking sequence on fatigue behaviour of hybrid pineapple leaf fibre/carbon-fibre-reinforced epoxy composites
    ( 2021)
    Mohd Khairul Rabani Hashim
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Farizul Hafiz Kasim
    ;
    Mohamed Thariq Hameed Sultan
    ;
    Ain Umaira Md Shah
    ;
    Kamarul Arifin Ahmad
    ;
    Adi Azriff Basri
    This study examined the fatigue behaviour of pineapple leaf fibre/carbon hybrid laminate composites under various stacking sequences. The vacuum infusion technique was used to fabricate the symmetric quasi-isotropic oriented laminates, in which the stacking was varied. The laminate was tested under static and fatigue tensile load according to ASTM D3039-76 and ASTM D3479-96, respectively. Maximum tensile strength and modulus of 119.34 MPa and 6.86 GPa, respectively, were recorded for the laminate with external PALF ply and internal carbon ply oriented at [± 45°2, 0°/90°2]s (PCCP_45090). The fatigue tests showed that PCCP_45090 and CPPC_09045 (with internal PALF ply and external carbon ply oriented at [0°/90°2, ± 45°2]s) exhibited a higher useful life, especially at the high-stress level of the ultimate tensile strength. The normalised stress against the number of cycles showed that the stacking sequences of different ply orientations affected the fatigue behaviour more than the stacking sequences of the material. The laminate stacking sequence significantly affected the hysteresis energy and stiffness evolution. The scanning electron microscopy images showed that the fatigue failure modes included fibre pull-out, fibre breakage, matrix cracking, debonding, and delamination. The study concluded that PCCP_45090 exhibited an outstanding fatigue performance.
  • Publication
    Structural, morphological and thermal properties of cellulose nanofibers from napier fiber (Pennisetum purpureum)
    ( 2020)
    Revati Radakisnin
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Mohammad Jawaid
    ;
    Mohamed Thariq Hameed Sultan
    ;
    Mohd Faizal Mat Tahir
    The purpose of the study is to investigate the utilisation of Napier fiber (Pennisetum purpureum) as a source for the fabrication of cellulose nanofibers (CNF). In this study, cellulose nanofibers (CNF) from Napier fiber were isolated via ball-milling assisted by acid hydrolysis. Acid hydrolysis with different molarities (1.0, 3.8 and 5.6 M) was performed efficiently facilitate cellulose fiber size reduction. The resulting CNFs were characterised through Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), particle size analyser (PSA), field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM). The FTIR results demonstrated that there were no obvious changes observed between the spectra of the CNFs with different molarities of acid hydrolysis. With 5.6 M acid hydrolysis, the XRD analysis displayed the highest degree of CNF crystallinity at 70.67%. In a thermal analysis by TGA and DTG, cellulose nanofiber with 5.6 M acid hydrolysis tended to produce cellulose nanofibers with higher thermal stability. As evidenced by the structural morphologies, a fibrous network nanostructure was obtained under TEM and AFM analysis, while a compact structure was observed under FESEM analysis. In conclusion, the isolated CNFs from Napier-derived cellulose are expected to yield potential to be used as a suitable source for nanocomposite production in various applications, including pharmaceutical, food packaging and biomedical fields.
      3  18
  • Publication
    Influence of cellulose filler extracted from napier grass on thermal characterizations, moisture content, tensile strength, biodegradation, and morphological structure of bioplastic films
    ( 2022-01-01)
    Tuan Rohadi T.N.
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Mohd Shukry Abdul Majid
    ;
    Normahira Mamat @ Mohamad Nor
    ;
    Sulaiman M.H.
    This paper reports on the effects of Napier grass (NG) cellulose used as a filler on the thermal characterizations, moisture content, tensile strength, biodegradation, and morphological structure of bioplastic films. Bioplastic films were obtained from chitosan and gelatin; and from the fiber, bark, and whole of Napier grass (NG). The films were prepared by solution casting with 1, 1.5, 2, and 2.5 wt.% of cellulose content. Alkali and bleaching treatments were performed on the cellulose using 8% sodium hydroxide and 1.7% sodium chlorite. The results reveal that the tensile strength of the bioplastic film with 2 wt.% of fiber filler was the highest and decreased when the cellulose filler loading was 2.5 wt.%. Increasing the cellulose loading accelerated the biodegradation rate of the bioplastic films. The addition of the fiber filler had improved compatibility among the components and the barrier properties of the film that led to a less-porous film.
      3
  • Publication
    Dielectric properties of hydrothermally modified potato, corn, and rice starch
    ( 2022)
    Chong You Beh
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Mohd Shukry Abdul Majid
    ;
    Khor Shing Fhan
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Kim Yee Lee
    The effect of starch granule sizes, shapes, composition, and frequency on the dielectric properties (dielectric constant, loss factor, and conductivity) of native and hydrothermally modified starches (potato, corn, and rice starch) are investigated in this work. Dielectric properties are determined from 5 Hz to 5 GHz. The modified starches exhibit lower dielectric properties than the native starches from 5 Hz to 5 GHz due to the disruption of the native polysaccharide’s molecular arrangement. The modified potato starch shows the highest loss factor (208.12 at 50 Hz and 19.95 at 500 Hz) and stable conductivity (~5.33 × 10−7 S/m at 50 Hz and 500 Hz) due to the larger continuous network structure after hydrothermal modification. The rice starch shows the largest difference in dielectric constant (47.30%) and loss factor (71.42%) between the modified form and native form in the frequency range of 5 MHz–5 GHz. This is due to the restriction of dipole motions in the closely packed structure after hydrothermal modification. The findings indicate that the quality of starch modification can be characterized by dielectric properties for assisting starch-based plastic production’s design.
      1  12
  • Publication
    The effect of stacking sequence and ply orientation on the mechanical properties of Pineapple Leaf Fibre (PALF)/Carbon hybrid laminate composites
    ( 2021)
    Mohd Khairul Rabani Hashim
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Farizul Hafiz Kasim
    ;
    Mohamed Thariq Hameed Sultan
    In this paper, the effects of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre (PALF)/carbon hybrid laminate composites were investigated. The hybrid laminates were fabricated using a vacuum infusion technique in which the stacking sequences and ply orientations were varied, which were divided into the categories of cross-ply symmetric, angle-ply symmetric, and symmetric quasi-isotropic. The results of tensile and flexural tests showed that the laminate with interior carbon plies and ply orientation [0°, 90°] exhibited the highest tensile strength (187.67 MPa) and modulus (5.23 GPa). However, the highest flexural strength (289.46 MPa) and modulus (4.82 GPa) were recorded for the laminate with exterior carbon plies and the same ply orientation. The fracture behaviour of the laminates was determined by using scanning electron microscopy, and the results showed that failure usually initiated at the weakest PALF layer. The failure modes included fibre pull-out, fibre breaking, matrix crack, debonding, and delamination.
      4  40
  • Publication
    Dielectric and biodegradation properties of biodegradable nano-hydroxyapatite/starch bone scaffold
    ( 2022)
    Beh Chong You
    ;
    Cheng Ee Meng
    ;
    Nashrul Fazli Mohd Nasir
    ;
    Emma Ziezie Mohd Tarmizi
    ;
    Khor Shing Fhan
    ;
    Eng Swee Kheng
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    This study is aim to investigate the dielectric properties (dielectric constant, ε′ and loss factor, ε′′) and the biodegradation properties of the nano-hydroxyapatite/starch bone scaffold with various starch proportion in simulated body fluid. The nano-hydroxyapatite/starch bone scaffolds with starch proportions 30, 40, 50, 60, 70, 80, and 90 wt.% were fabricated. The ε′ and ε′′ of nano-hydroxyapatite/starch composite decrease when frequency increases. However, it increases when starch proportion and temperature increase. The biodegradation properties of the nano-hydroxyapatite/starch bone scaffold can be improved when the dielectric properties and porosity are enhanced. The enhancement of dielectric properties and porosity is due to the increment of starch proportion. The nano-hydroxyapatite/starch bone scaffold with the high starch proportion exhibits nano-hydroxyapatite/starch interfaces with strong intermolecular interactions that can stabilize biodegradation and biomineralization. The dielectric properties of the simulated body solutions are highly sensitive to the variation of the ion concentrations (calcium and phosphate). The nano-hydroxyapatite/starch bone scaffold with 80 wt.% starch proportion exhibits significant dielectric and biodegradation properties. It has potential to be a biodegradable inorganic/organic bone scaffold.
      1  8
  • Publication
    The effect of stacking sequence and ply orientation on the mechanical properties of Pineapple Leaf Fibre (PALF)/Carbon hybrid laminate composites
    ( 2021)
    Mohd Khairul Rabani Hashim
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Farizul Hafiz Kasim
    ;
    Mohamed Thariq Hameed Sultan
    In this paper, the effects of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre (PALF)/carbon hybrid laminate composites were investigated. The hybrid laminates were fabricated using a vacuum infusion technique in which the stacking sequences and ply orientations were varied, which were divided into the categories of cross-ply symmetric, angle-ply symmetric, and symmetric quasi-isotropic. The results of tensile and flexural tests showed that the laminate with interior carbon plies and ply orientation [0°, 90°] exhibited the highest tensile strength (187.67 MPa) and modulus (5.23 GPa). However, the highest flexural strength (289.46 MPa) and modulus (4.82 GPa) were recorded for the laminate with exterior carbon plies and the same ply orientation. The fracture behaviour of the laminates was determined by using scanning electron microscopy, and the results showed that failure usually initiated at the weakest PALF layer. The failure modes included fibre pull-out, fibre breaking, matrix crack, debonding, and delamination.
      3  13