Now showing 1 - 2 of 2
  • Publication
    Microstructure evolution of Ag/TiOâ‚‚ thin film
    ( 2021) ; ; ;
    Mohd Izrul Izwan Ramli
    ;
    ; ;
    Kazuhiro Nogita
    ;
    Hideyuki Yasuda
    ;
    Marcin Nabiałek
    ;
    Jerzy J. Wysłocki
    Ag/TiO₂ thin films were prepared using the sol-gel spin coating method. The microstructural growth behaviors of the prepared Ag/TiO₂ thin films were elucidated using real-time synchrotron radiation imaging, its structure was determined using grazing incidence X-ray diffraction (GIXRD), its morphology was imaged using the field emission scanning electron microscopy (FESEM), and its surface topography was examined using the atomic force microscope (AFM) in contact mode. The cubical shape was detected and identified as Ag, while the anatase, TiO₂ thin film resembled a porous ring-like structure. It was found that each ring that coalesced and formed channels occurred at a low annealing temperature of 280 °C. The energy dispersive X-ray (EDX) result revealed a small amount of Ag presence in the Ag/TiO₂ thin films. From the in-situ synchrotron radiation imaging, it was observed that as the annealing time increased, the growth of Ag/TiO₂ also increased in terms of area and the number of junctions. The growth rate of Ag/TiO₂ at 600 s was 47.26 µm2/s, and after 1200 s it decreased to 11.50 µm2/s and 11.55 µm2/s at 1800 s. Prolonged annealing will further decrease the growth rate to 5.94 µm2/s, 4.12 µm2/s and 4.86 µm2/s at 2400 s, 3000 s and 3600 s, respectively.
      3  17
  • Publication
    Factors of controlling the formation of Titanium Dioxide (TiO₂) synthesized using Sol-gel method – a short review
    There have been experiments on TiOâ‚‚ thin films synthesized utilizing sol-gel techniques. The sol-gel method is a straightforward technology that gives numerous benefits to the researcher, for instance, material's reliability, reproducibility, and controllability. Following from there, it can be utilized to make high-quality nano-structured thin films. According to previous studies, the TiOâ‚‚ films' characteristics occur to be highly dependent on the production parameters and initial materials utilized. Controlling the formation of TiOâ‚‚ thin films with the sol-gel method was momentarily discussed here.
      1  38