Shahriman Abu Bakar
Thumbnail Image
Preferred name
Shahriman Abu Bakar
Official Name
Shahriman, Abu Bakar
Alternative Name
Bakar, Shahriman A.B.
Shariman, A. B.
Ab, Shahriman
Abu Bakar, S.
Bakar, A. S.
Bakar, S. A.
Bakar, Shahriman Abu
Bakar, Sharifah Adzila Syed Abu
Bakar, S. Abu
Main Affiliation
Scopus Author ID
57196198202
Researcher ID
ELT-0087-2022

Research Output

Filters

2
2
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    Heat transfer improvement in simulated small battery compartment using metal oxide (CuO)/deionized water nanofluid
    ( 2020-02-01)
    Bin-Abdun N.A.
    ;
    Zuradzman Mohamad Razlan
    ;
    Shahriman Abu Bakar
    ;
    Voon Chun Hong
    ;
    Ibrahim Z.
    ;
    Wan Khairunizam Wan Ahmad
    ;
    Mohd Ridzuan Mohd Jamir
    Improving the heat transfer coefficient of working fluids is essential for achieving the best performance of manufacturing systems. As a replacement of conventional working fluids, nanofluids have a high potential for improving this heat transfer coefficient. However, nanofluids are seldom implemented in actual systems, and several factors should be considered before actual application. Accordingly, this study investigated the thermophysical properties and heat transfer rate of CuO/deionized water nanofluid with and without sodium dodecyl sulfate (SDS) surfactants. Three different volumetric concentrations of the nanofluid were prepared using a two-step preparation method. The experimental steps were divided into two phases: static and dynamic. In these experiments, the thermophysical properties of the prepared nanofluids and the heat transfer coefficient were measured using an apparatus designed based on an actual heat exchanger for a lithium ion polymer battery compartment. The effects of flow rate and surfactants on the heat transfer rate of the nanofluids with varying volumetric concentrations of 0.08%, 0.16%, and 0.40% were analyzed. The results indicate that the heat transfer rate increases considerably as the flow rate increases from 0.5 L/min to 1.2 L/min and with the presence of surfactants. The highest heat transfer rate was obtained at a 0.40% volumetric concentration of CuO/deionized water nanofluid with SDS surfactant.
  • Publication
    A review of the application and effectiveness of heat storage system using phase change materials in the built environment
    ( 2021-05-03)
    Ibrahim Z.
    ;
    Newby S.
    ;
    Hassani V.
    ;
    Ya'akub S.R.
    ;
    Shahriman Abu Bakar
    ;
    Zuradzman Mohamad Razlan
    ;
    Wan Khairunizam Wan Ahmad
    Global warming is the most significant threat that civilization faced within the 21st century. Buildings, which account for 40% of global consumption of energy and greenhouse gas emissions, play a key role in global warming. It is estimated that their destructive impact will grow by 1.8 percent per year by 2050, indicating that future energy consumption and emissions will be more critical than they are today. Therefore, the use of a latent heat storage system using phase change materials (PCM) is one of the effective ways of storing thermal energy and has the advantages of high-energy storage density and the isothermal nature of the storage process. PCM has been widely used in latent heat thermal storage systems for heat pumps, solar engineering, and spacecraft thermal control applications. Thermal energy conservation by latent heat is an ideal way to increase the thermal inertia of building envelopes, which would minimize temperature fluctuations, contributing to increased occupants' thermal comfort. For this reason, high-density PCM can be used effectively. This paper reviews recent studies of the application and effectiveness of using PCM in the built environment.