Roshazita Che Amat
Thumbnail Image
Preferred name
Roshazita Che Amat
Official Name
Roshazita, Che Amat
Alternative Name
Amat, Roshazita Che
Che Amat, Roshazita
Amat, R. C.
Che Amat, R.
Main Affiliation
Scopus Author ID
55749971400

Research Output

Filters

9
Reset filters

Settings
Now showing 1 - 9 of 9
  • Publication
    Investigating the effect of steel wire and carbon black from worn out tyre on the strength of concrete
    ( 2024-10)
    Norlia Mohamad Ibrahim
    ;
    Ali Naqiuddin Zamah Shari
    ;
    Nur Zakiah Anis Abdul Rahim
    ;
    Nur Liza Rahim
    ;
    Mustaqqim Abdul Rahim
    ;
    Roshazita Che Amat
    ;
    Norshah Aizat Shuaib
    ;
    György Deak
    Technology in concrete is rapidly developing to improve the quality and properties of concrete. One of the many recycled materials is worn-out tyres. Currently, the use of tires is very widespread considering the use of vehicles that increase from time to time. Piles of discarded tires can cause a lot of damage to the environment. So, by using steel wire waste (SWW) as new fiber reinforcement in concrete and with the combination with carbon black (CB), it is hoped that, by doing this, not only it could improve the quality of concrete, but also preserves the environment. Therefore, the objective of this research was, to identify the properties of fresh concrete with the addition of SWW and CB, and also to investigate the physical and mechanical properties of hardened concrete, incorporating of SWW as additional fiber reinforcement and CB. For fresh concrete, workability using a slump test was conducted. Several tests were carried out on the properties of hardened concrete. Among them were compressive strength, flexural strength, splitting tensile strength, and water absorption. The physical appearance of the concrete has also been examined and recorded. There are four batches of concrete which consist of one control batch and three batches of concrete with various weights of SWW which are in the portion of 300 g, 600 g, and 900 g, and the weight of CB is maintained at 300 g for all batches. For workability, all concrete batches with the addition of SWW and CB show acceptable workability. For the case of the density of fresh concrete, samples containing 900 g addition of SWW have the highest density which was 2520 kg/m³, as expected. Results for water absorption show that the lowest value is contributed by the control sample which was 7.6%. For compressive and flexural strength, 300 g addition of SWW has the highest value which was 28.52 MPa for compressive strength and 7.52 MPa for flexural strength. Lastly, for splitting tensile strength, the highest value was also obtained when 300 g addition of SW was added which was 5.4 MPa. To conclude, SWW and CB can be added to concrete to obtain comparable strength of concrete. However, some modifications could be made to both recycle materials to improve concrete performance.
  • Publication
    Recycling fly ash from MSWI for artificial aggregate production for concrete
    ( 2020-12-29)
    Norlia Mohamad Ibrahim
    ;
    Khairul Nizar Ismail
    ;
    Roshazita Che Amat
    ;
    Nur Liza Rahim
    ;
    Mustaqqim Abdul Rahim
    This study focusses on the development of new lightweight aggregate (LWA) that eventually will have comparable properties with existing natural aggregate which is granite. The main objectives of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded palletization process. The ashes are collected from Cameron Highland Incineration Plant, Malaysia that can be divided into bottom ash (BA) and fly ash (FA). This study uses FA as partial raw material to substitute the Ordinary Portland Cement (OPC). The properties FA are studied by means of X-Ray Fluorescence (XRF). The LWA is fly ash lightweight aggregate (FALA). The production of LWA is based on cold-bonded palletization technique. FALA have experienced two different curing process for 28 days namely room-room (RR) and room-water (RW) curing conditions. The percentage of FA used in this study is 10%, 20%, 30%, 40% and 50% of cement replacement and the size is fixed between 10 mm to 20 mm with circular shape. The properties of FALA produced in this study is examined including loose bulk density, and aggregate impact value (AIV). Other physical properties including colour and texture are also being investigated. From the results of LWA it is clearly seen that 20% FA were the best percentage of ash used to produce good quality LWA. Loose bulk density of FALA selected is 716.72 kg/m3 and AIV 13.80%.
      1
  • Publication
    Preservation of natural resources by utilizing combustion ash in concrete and determination of its engineering properties
    ( 2023-01-01)
    Norlia Mohamad Ibrahim
    ;
    Nur Liza Rahim
    ;
    Syakirah Afiza Mohammed
    ;
    Roshazita Che Amat
    ;
    Mustaqqim Abdul Rahim
    ;
    Zailani W.W.A.
    ;
    Laslo L.
    ;
    Muhamad N.
    Due to the large amount of combustion ash being thrown into landfills, which can lead to environmental pollution, new alternatives to construction materials can be developed by utilising this combustion ash as a part of the main raw materials, while at the same time helping to preserve natural resources in the concrete manufacturing industry. Generally, using new waste materials will eventually affect the engineering properties of concrete. Therefore, the main objective of this study is to analyse the engineering properties of concrete containing combustion ash as a partial replacement for ordinary Portland cement (OPC). CA can be classified as combustion bottom ash (CBA) and combustion fly ash (CFA). CA is tested for its chemical compositions using X-Ray Fluorescence (XRF), and its four main compositions, which are silica, alumina, iron, and calcium, are examined and discussed extensively. Other testing for the property of CA includes Scanning Electron Microscopic (SEM) and specific gravity testing for coarse aggregate. To produce sustainable concrete from waste, several tests have been conducted to determine the engineering properties of the concrete, such as compressive strength, flexural strength, and splitting tensile strength. Results show that CA, which consists mainly of silica dioxide, contributed to the strength of concrete. SEM images show that CBA has a porous structure with an angular and rough texture, whereas CFA has more rounded particles, which influence the overall compressive strength. Furthermore, it was discovered that as the proportion of CBA utilised increased, the compressive strength, flexural strength, and splitting tensile strength of the concrete improved. Based on the results of the testing, CBA is suggested for use as a supplementary cementitious material in concrete.
      1
  • Publication
    Viability Study on Fly Ash and Bottom Ash from Combustion Waste
    ( 2023-01-01)
    Norlia Mohamad Ibrahim
    ;
    Mohamed S.A.
    ;
    Roshazita Che Amat
    ;
    Nur Liza Rahim
    ;
    Zailani W.W.A.
    ;
    Mustaqqim Abdul Rahim
    ;
    Laslo L.
    ;
    Khairul Nizar Ismail
    The substitution or addition of new supplementary cementitious materials (SCM) in the production of variety of construction materials has gained much interest. One of the examples of SCM is incineration ash which consist of fly ash (FA) and bottom ash (BA) which are the residues from the ignition of biomass and can brings applicable ecological advantages. However, the properties of this new materials need to be investigated to ensure its full potential can be developed. Therefore, this study is initiated to identify the characteristics of incineration ash from local source in Malaysia. To identify the elemental components of ashes, most widely method was adopted which is using X-Ray Fluorescence (XRF). The quantity of unburned carbon in fly ash is measured by loss on ignition, which has a major influence on the product's characteristics. In addition, specific gravity and density were also determined and comparison has been made with cement. In this study it was found out that XRF results shows that both FA and BA consist of the same mineral composition with OPC majorly in silica, aluminium, calcium, and iron which makes is suitable to be used in the concrete. For LOI, the value for BA is much higher compared with FA due to the amount of unburnt carbon in its original compositions and the incomplete burning due to insufficient contact time in the furnace. Based on the result obtained for LOI, the average LOI value for FA and BA is 17.33 % and 44.67 %, respectively. As expected, for the specific gravity and density, FA having the lowest specific gravity and density. The density obtained for FA is 755 kg/m3 and for BA is 593 kg/m3. Overall, the use of incineration ash can be fully investigated by exploring other parameter that influence the performance of construction materials.
      1
  • Publication
    Workability and density of concrete containing Coconut Fiber
    ( 2022-01-01)
    Norlia Mohamad Ibrahim
    ;
    Nur Liza Rahim
    ;
    Roshazita Che Amat
    ;
    Mustaqqim Abdul Rahim
    ;
    Woo Chin Kah
    ;
    Irnis Azura Zakaria
    ;
    Moncea Andreea
    Use of natural fiber in concrete to enhance the strength of concrete have been used widely and become as part of an alternative building materials. For instance, the use of coconut fiber (CF) which are non-hazardous, environmental-friendly and can improves the engineering properties of concrete. The aim of this study is to identify the workability and density of CF modified concrete. CF were added into the mixture in 3 different amount that is 200 g, 400 g, and 600 g. The size of the cube samples is 100 × 100 × 100 mm and were cured for 14 days, and 28 days. To evaluate the effect of CF in improving the properties of concrete, the properties of ordinary concrete are used as a reference which consist 0% CF. The fresh and hardened densities for all samples also show that when more fiber was added into mixture, densities reduced. As summary, the study shows that by adding CF in concrete reduced the workability and density of concrete.
      8  1
  • Publication
    Reclamation and Reutilization of Incinerator Ash in Artificial Lightweight Aggregate
    ( 2022-01-01)
    Norlia Mohamad Ibrahim
    ;
    Roshazita Che Amat
    ;
    Mustaqqim Abdul Rahim
    ;
    Nur Liza Rahim
    ;
    Abdul Rahim Abdul Razak
    This study focused on the reclamation of ash from incineration process and development of new artificial lightweight aggregate (LWA) that have comparable properties with existing natural coarse aggregate. The main objective of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded pelletization. Two types of incineration ash which is bottom ash (BA) and fly ash (FA) were collected from Cameron Highland Incineration Plant, Malaysia. The properties of BA and FA are studied by means of X-Ray Fluorescence (XRF) and microstructure of these ashes were inspected using Scanning Electron Microscope (SEM). The properties of BALA and FALA produced in this study is examined including loose bulk density, water absorption and aggregate impact value (AIV). From the results of both types of artificial LWA, the lowest loose bulk density of BALA is BALA50 with 564.14 kg/m3and highest is at 831.19 kg/m3. For FALA50, lowest loose bulk density is 573.64 kg/m3and highest is 703.35 kg/m3. Water absorption of BALA and FALA is quite similar with one another in with the value of 23.8% and 22.6%, respectively. Generally, FALA have better qualities of LWA comparing with BALA with lower bulk density and water absorption and can be categorized as strong aggregate. In summary, reclamation and reutilization of incinerator ash has generated acceptable qualities for artificial LWA. Both types of BA and FA shown a great potential to be recycled as additional materials in artificial aggregate production.
      3  1
  • Publication
    Waste to concrete material: Potential Study of Chemical Characterization of Coal Fly Ash and Bottom Ash
    ( 2023-01-01)
    Nur Liza Rahim
    ;
    Syakirah Afiza Mohammed
    ;
    Roshazita Che Amat
    ;
    Norlia Mohamad Ibrahim
    ;
    Hamzah N.
    ;
    Samsudin S.
    ;
    Shamshinar Salehuddin
    ;
    Mustaqqim Abdul Rahim
    ;
    Holban E.
    This research focuses on the chemical properties of coal fly ash (CFA) and coal bottom ash (CBA) obtained from Sultan Azlan Shah Power Plant and compares them with the characteristics of ordinary Portland cement (OPC). Coal has been recognised as a significant fuel source in Malaysia, where it is extensively employed in the creation of steel, cement, and power. When coal is burned to create power, several different types of coal ash are created, including fly ash, bottom ash, boiler slag, and clinker. Fly and bottom ash, however, are the main coal ash waste products that have been created. In an effort to create sustainable concrete from waste, a number of studies have been carried out to ascertain the chemical characteristics of fly and bottom ash. These tests include Energy Disperse X-Ray (EDX), Mineralogy (XRD), and X-Ray Fluorescence (XRF). From the SEM result, fly ash has smaller particles and a spherical, uniform shape than bottom ash and cement. Fly and bottom ash from the Sultan Azlan Shah power plant contain a number of elements, including Silicon (Si), Aluminium (Al), Oxygen (O), Calcium (Ca), Titanium (Ti), Iron (Fe), Magnesium (Mg), Potassium (K), Carbon (C), and Sodium, according to Energy Dispersive X-Ray (EDX) test. The fly ash is primarily an amorphous material, with the presence of quartz crystalline phase (SiO2) at 24.3% and bottom ash at 31.1%, according to X-ray Diffraction (XRD) data. For the mullite phase (3AlO3.2SiO2), fly and bottom ash show results of 24.9% and 14.5%, respectively. According to an X-ray fluorescence (XRF) investigation, the main constituents of fly and bottom ash are silica, iron, and alumina. Fly ash is classified as Class F because it has a high concentration of SiO2, Al2O3, and Fe2O3 while OPC has a high CaO value. With the right composition and material preparation, CFA and CBA from the Sultan Azlan Shah Power Plant can be used as a cement replacement in concrete.
      4
  • Publication
    Exploring the Properties of Mortar Containing Incineration Fly Ash
    ( 2021-11-26)
    Norlia Mohamad Ibrahim
    ;
    Rohaya Abdul Malek
    ;
    Nur Liza Rahim
    ;
    Mustaqqim Abdul Rahim
    ;
    Roshazita Che Amat
    ;
    Syakirah Afiza Mohammed
    ;
    Badri N.A.
    Fly Ash (FA) is one of the waste materials generated from the combustion of solid waste through incinerator and contains hazardous substances. Further treatment to the ash needs to be done to avoid further environmental destruction. As an alternative solution for this problem, FA is used as a replacement material for cement in the mortar. The main objective of this study is to explore the potential use of FA as partial replacement of cement in mortar. The percentage of FA used to replace the cement in this study is 0%, 5%, 10%, 15% and 20%. Several important tests were conducted to identify main properties of the mortar such as compressive strength, water absorption, density and ultra-pulse velocity. Mortar containing 15% of fly ash has the highest of compression strength which is 35 MPa after 28 days. Besides, the mortar containing 5% of fly ash has the highest result of water absorption test and density test whereas mortar containing 20% of fly ash has the highest value for pulse velocity after 28 days. Thus, mortar containing fly ash has good physical and mechanical properties.
      4
  • Publication
    Reclamation and Reutilization of Incinerator Ash in Artificial Lightweight Aggregate
    ( 2022)
    Norlia Mohamad Ibrahim
    ;
    Roshazita Che Amat
    ;
    Mustaqqim Abdul Rahim
    ;
    Nur Liza Rahim
    ;
    Abdul Rahim Abdul Razak
    This study focused on the reclamation of ash from incineration process and development of new artificial lightweight aggregate (LWA) that have comparable properties with existing natural coarse aggregate. The main objective of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded pelletization. Two types of incineration ash which is bottom ash (BA) and fly ash (FA) were collected from Cameron Highland Incineration Plant, Malaysia. The properties of BA and FA are studied by means of X-Ray Fluorescence (XRF) and microstructure of these ashes were inspected using Scanning Electron Microscope (SEM). The properties of BALA and FALA produced in this study is examined including loose bulk density, water absorption and aggregate impact value (AIV). From the results of both types of artificial LWA, the lowest loose bulk density of BALA is BALA50 with 564.14 kg/m3 and highest is at 831.19 kg/m3 . For FALA50, lowest loose bulk density is 573.64 kg/m3 and highest is 703.35 kg/m3 . Water absorption of BALA and FALA is quite similar with one another in with the value of 23.8% and 22.6%, respectively. Generally, FALA have better qualities of LWA comparing with BALA with lower bulk density and water absorption and can be categorized as strong aggregate. In summary, reclamation and reutilization of incinerator ash has generated acceptable qualities for artificial LWA. Both types of BA and FA shown a great potential to be recycled as additional materials in artificial aggregate production.
      16  19