Rafiza Abd Razak
Thumbnail Image
Preferred name
Rafiza Abd Razak
Official Name
Rafiza, Abd Razak
Alternative Name
Rafiza, Abd Razak
Rafiza, Abdul Razak
Abdul Razak, Rafiza
Rafiza, R. A.
Razak, Rafiza Abd
Rafiza, A. R.
Abdul Razak, R.
Razak, R. A.
Razak, Rafiza Abdul
Razak, A. R.
Abd Razak, R.
Main Affiliation
Scopus Author ID
51161919900
Researcher ID
AAL-1501-2020

Research Output

Filters

52
Reset filters

Settings
Now showing 1 - 10 of 52
  • Publication
    Comparative study on early strength of sodium hydroxide (NaOH) activated fly ash based geopolymer
    ( 2017-09-29)
    Zarina Yahya
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Siti Zulaikha Abd Talib
    ;
    Rafiza Abd Razak
    The urge to reduce carbon dioxide (CO2) emission has encourage researchers to introduce environmental friendly binder or known as geopolymer. This new binder was produced by mixing source materials rich in silica and alumina with alkaline liquids. For this study, class F fly ash was used as source material with two different types of alkaline activator; sodium hydroxide (NaOH) only and a combination of water glass with NaOH. The different concentration of the NaOH solutions (8M, 10M, 12M and 14M) is used in the production of geopolymer. The parameters such as curing regime, solid/liquid ratio, and water glass/NaOH ratio are controlled in the study. The samples with combination of NaOH and water glass as alkaline activator were prepared by mixing these two solution and stirred for 2 minutes. Then this solution were mixed together with fly ash for 3 minutes and casted in the mould. The performance of the fly ash based geopolymer are evaluated by the compressive strength, water absorption and density at the early age of 1th, 3th and 7th days. Based on the study, at a concentration of 14M on 7th days had achieved the maximum compressive strength of 7.1 MPa for samples activated with NaOH only. Meanwhile, for geopolymer samples activated with a combination of the water glass and NaOH, the maximum strength of 33.33 MPa was recorded on 7th days of testing with NaOH concentration of 12 M. The water absorption for all geopolymer samples were ranging from 2.04 % to 2.78%, which are below the limit (3%). While the density of the geopolymer paste were in the range of 1552 kg/m3 to 1680 kg/m3, which are below the limit (2400 kg/m3). From the standpoint of strength of hardened geopolymer samples, the most effective alkaline activator in geopolymer is the combination of NaOH and water glass.
  • Publication
    Finite element analysis on structural behaviour of geopolymer reinforced concrete beam using Johnson-Cook damage in Abaqus
    ( 2022-01-01)
    Nurul Aida Mohd Mortar
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Kamarudin Hussin
    ;
    Rafiza Abd Razak
    ;
    Sanusi Hamat
    ;
    Hilmi A.H.
    ;
    Shahedan N.N.
    ;
    Li L.Y.
    ;
    Aziz I.H.A.
    This paper details a finite element analysis of the behaviour of Si-Al geopolymer concrete beam reinforced steel bar under an impulsive load and hyper velocity speed up to 1 km/s created by an air blast explosion. The initial torsion stiffness and ultimate torsion strength of the beam increased with increasing compressive strength and decreasing stirrup ratio. The study involves building a finite element model to detail the stress distribution and compute the level of damage, displacement, and cracks development on the geopolymer concrete reinforcement beam. This was done in ABAQUS, where a computational model of the finite element was used to determine the elasticity, plasticity, concrete tension damages, concrete damage plasticity, and the viability of the Johnson-Cook Damage method on the Si-Al geopolymer concrete. The results from the numerical simulation show that an increase in the load magnitude at the midspan of the beam leads to a percentage increase in the ultimate damage of the reinforced geopolymer beams failing in shear plastic deformation. The correlation between the numerical and experimental blasting results confirmed that the damage pattern accurately predicts the response of the steel reinforcement Si-Al geopolymer concrete beams, concluded that decreasing the scaled distance from 0.298 kg/m3 to 0.149 kg/m3 increased the deformation percentage.
  • Publication
    Marshall Stability of Combination of Perlis Limestone and Granite in Hot Mix Asphalt
    ( 2024-06-07)
    Mohd Badrul Hisyam Ab Manaf
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Rafiza Abd Razak
    ;
    Hassan M.R.M.
    ;
    Muhamad K.
    ;
    Muhammad Munsif Ahmad
    Limestone is used in many countries for road pavement, such as Poland, USA and France. However, there are limitations in terms of mechanical and surface properties, but it has been used in some regions for years, particularly in Perlis, Malaysia, due to the need for a local source. The reason is that of caution of fear, in spite of wanting to explore the opportunities of Perlis limestone being used and understand the advantages and disadvantages of that aggregate. This study focused on the stability, flow, and volumetric by using a combination of Perlis limestone and granite in hot mixed asphalt (HMA) mixtures. The combination of Perlis Limestone and granite was analysed and tested to specification for roadworks by PWD, Malaysia. Furthermore, there will be a cost increment in road construction due to logistic and transportation problems in delivering imported granite aggregate from Kedah state. The result showed that HMA with less Perlis limestone aggregate showed a higher value of stability, flow and stiffness. As for the conclusion, HMA with more granite aggregate has better strength with less deformation compared with HMA with more Perlis limestone aggregate. HMA with more granite aggregate was also was stiffer, mainly due to the interlocking and frictional resistance of the aggregate due to the angularity and rougher surface of granite. However, since all the samples complied with the PWD specification, Perlis limestone proved it can be an alternative aggregate to be used in HMA.
  • Publication
    The effect of various waste materials' contents on the attenuation level of anti-radiation shielding concrete
    ( 2013)
    Ali Azeez
    ;
    Kahtan Mohammed
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Kamarudin Hussin
    ;
    Sandu, Andrei Victor
    ;
    Rafiza Abd Razak
    Samples of concrete contain various waste materials, such as iron particulates, steel balls of used ball bearings and slags from steel industry were assessed for their anti-radiation attenuation coefficient properties. The attenuation measurements were performed using gamma spectrometer of NaI (Tl) detector. The utilized radiation sources comprised 137Cs and 60Co radioactive elements with photon energies of 0.662 MeV for 137Cs and two energy levels of 1.17 and 1.33 MeV for the 60Co. Likewise the mean free paths for the tested samples were obtained. The aim of this work is to investigate the effect of the waste loading rates and the particulate dispersive manner within the concrete matrix on the attenuation coefficients. The maximum linear attenuation coefficient (μ) was attained for concrete incorporates iron filling wastes of 30 wt %. They were of 1.12 ± 1.31×10-3 for 137Cs and 0.92 ± 1.57 × 10-3 for 60Co. Substantial improvement in attenuation performance by 20%-25% was achieved for concrete samples incorporate iron fillings as opposed to that of steel ball samples at different (5%-30%) loading rates. The steel balls and the steel slags gave much inferior values. The microstructure, concrete-metal composite density, the homogeneity and particulate dispersion were examined and evaluated using different metallographic, microscopic and measurement facilities.
  • Publication
    Identifying Real Estate Buyer's Feedback on Three-Dimensional Mock-Up Model Among House Buyers in Malaysia
    ( 2024-04-19)
    Fazdliel Aswad Ibrahim
    ;
    Hang Y.H.
    ;
    Shafiei M.W.M.
    ;
    Rafiza Abd Razak
    ;
    Nur Soleha Abdul Rahim
    ;
    Norsyakilah Romeli
    Marketing communications are intended to convey messages or information to target users. In today's competitive business environment, products and services companies need to make sure that the communications they use are effective as consumers are made up of many features that have different perspectives and feedback. However, there is almost no specific study in this regard that focuses on the housing sector. Therefore, the aim of this research is to study the real estate buyers' response towards the marketing communications process and the marketing communication channels which are used in the housing industry in marketing the real estate property. A set of survey questions will be used in conjunction with a three-dimensional mock-up housing model in collecting the response from the real estate buyers in Malaysia. The data collection will be conducted through social media platforms where the convenience of non-probability sampling method is used in this study to obtain the real estate buyer's feedback. This study uses a quantitative method of survey to collect the data. The study data will be analysed using SPSS (Statistical package for the social sciences) software. The expectation of this study is to support the research literature on marketing communications in general as well as the real estate sector, in addition to provide guidance for real estate developers to improve their marketing communications, thus protecting the social interests of home buyers.
  • Publication
    Study on polypropylene twisted bundle fiber reinforced lightweight foamed concrete
    ( 2023)
    Md Azree Othuman Mydin
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Rafiza Abd Razak
    ;
    Mohd Nasrun Mohd Nawi
    ;
    Puput Risdanareni
    ;
    Poppy Puspitasari
    ;
    Andrei Victor Sandu
    ;
    Madalina Simona Baltatu
    ;
    Petrica Vizureanu
    Recent industrial developments have focused more and more on the applications of lightweight foamed concrete (LFC) in the construction industry, having advantages over normal-strength concrete. LFC, however, has several drawbacks including brittleness, high porosity, excessive drying shrinkage, rapid cracking, and low deformation resistance. Practical engineering typically chooses steel fiber or polymer fiber to increase the tensile and fracture resistance of LFC. The polypropylene twisted bundle fiber (PTBF) was added to the LFC with varying weight fractions of 0.0%, 0.5%, 1.0%, 1.5%, 2.0% and 2.5%. Three low densities of LFC were prepared, specifically 500 kg/m3, 700 kg/m3 and 900 kg/m3. The mechanical and durability properties of PTBF-reinforced LFC were determined through compression, flexural, splitting tensile, flow table, porosity, and water absorption tests. The results show that the addition of PTBF in LFC significantly improves the strength properties (compressive, flexural, and splitting tensile strengths) and reduces the water absorption capacity and porosity. The optimal weight fraction of PTBF was between 1.5 and 2.0% for mechanical properties enhancement. The inclusion of PTBF increased the ductility of LFC, and the specimens remain intact from loading to failure. The PTBF reduces the original cracks of the LFC and inhibits the development of further cracks in the LFC.
  • Publication
    Effect of Rice Straw Ash (RSA) as partially replacement of cement toward fire resistance of self-compacting concrete
    ( 2022)
    Yi Qin Chin
    ;
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Zarina Yahya
    ;
    Mokhzani Khair Ishak
    ;
    Sebastian Garus
    ;
    Marcin Nabiałek
    ;
    Warid Wazien Ahmad Zailani
    ;
    Khairil Azman Masri
    ;
    Andrei Victor Sandu
    ;
    Agata Śliwa
    Malaysia’s construction industry is experiencing rapid growth, translating into increased demand for cement. However, cement production pollutes the air to the detriment of the climate via CO2 emission, making research into a cementitious replacement in concrete a necessity. This paper details an experimental study of self-compacting concrete (SCC) with partial replacement of cement by rice straw ash (RSA), which is expected to result in environmental preservation due to the green materials being used in cement production. The physicomechanical properties of the SCC with RSA replacement were determined via its compressive strength, water absorption, self-workability, and fire resistance (residual strength after exposure to high temperatures). The proportion of RSA replacement used were 0%, 5%, 10%, 15%, 20%, and 25%, and all passed the slump flow test, except the 20% and 25% samples. The SCC samples with 15% of RSA replacement reported the highest compressive strength at 7 and 28 curing days and the highest residual strength post-exposure to high temperatures. The lowest percentage of water absorption was reported by the 15% of RSA replacement, with a density of 2370 kg/m3
  • Publication
    Setting time and after setting properties of high calcium fly ash geopolymers with different concentration of sodium hydroxide
    ( 2021)
    Rosnita Mohamed
    ;
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Ikmal Hakem Aziz
    ;
    Liyana Ahmad Sofri
    ;
    Noor Fifinatasha Shahedan
    Setting time in geopolymers is known as the time taken for the transition phase of liquid to solid of the geopolymer system in which is represented in the initial setting and final setting. Setting time is significant specifically for application in the construction field. This study intends to determine the setting time of high calcium fly ash geopolymers and the properties of the geopolymers after setting (1-day age). This includes the determination of heat evolved throughout geopolymerization using Differential Scanning Calorimeter. After setting properties determination includes compressive strength and morphology analysis at 1-day age. High calcium fly ash was used as geopolymer precursor. Meanwhile, for mixing design, the alkali activator was a mixture of sodium silicate and sodium hydroxide (concentration varied from 6M-14M) with a ratio of 2.5 and a solid-to-liquid ratio of 2.5. From this study, it was found that high calcium fly ash geopolymer with 12M of NaOH has a reasonable setting time which is suitable for on-site application as well as an optimal heat evolved (–212 J/g) which leads to the highest compressive strength at 1-day age and no formation of microcracks observed on the morphology. Beyond 12M, too much heat evolved in the geopolymer system can cause micro-cracks formation thus lowering the compressive strength at 1-day age.
  • Publication
    A Review on the Concrete Durability Exposed to Different Wet-Dry Cycles Conditions
    ( 2024-04-19)
    Zarina Yahya
    ;
    Rafiza Abd Razak
    ;
    Khairunnisa Muhamad
    Concrete structure is prone to corrosion and weathering when built near marine environment. The greater damage on the concrete can be observed when it involves wet-dry action such as tidal waves combine with the existence of aggressive ions such as sulphate and chloride in seawater. The objective of this study is to review on the mechanism of sulphate, chloride attack toward concrete, parameters that influence the wet-dry action and identify the overview of research trends. The mechanism of sulphate and chloride attack during wet-dry action had reciprocal inhibiting effect on concrete and the penetration level for each ion also vary. The physical and mechanical damage of concrete exposed to wet-dry action also influence by wet-dry ratio, number of cycles and temperature during drying process. The main compound detected during exposure period are Friedel salt, ettringite, mirabilite and thenardite which can cause concrete delamination and spalling.
  • Publication
    Artificial lightweight aggregates made from pozzolanic material: A review on the method, physical and mechanical properties, thermal and microstructure
    ( 2022)
    Dickson Ling Chuan Hao
    ;
    Rafiza Abd Razak
    ;
    Marwan Kheimi
    ;
    Zarina Yahya
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Dumitru Doru Burduhos Nergis
    ;
    Hamzah Fansuri
    ;
    Ratna Ediati
    ;
    Rosnita Mohamed
    ;
    Alida Abdullah
    As the demand for nonrenewable natural resources, such as aggregate, is increasing worldwide, new production of artificial aggregate should be developed. Artificial lightweight aggregate can bring advantages to the construction field due to its lower density, thus reducing the dead load applied to the structural elements. In addition, application of artificial lightweight aggregate in lightweight concrete will produce lower thermal conductivity. However, the production of artificial lightweight aggregate is still limited. Production of artificial lightweight aggregate incorporating waste materials or pozzolanic materials is advantageous and beneficial in terms of being environmentally friendly, as well as lowering carbon dioxide emissions. Moreover, additives, such as geopolymer, have been introduced as one of the alternative construction materials that have been proven to have excellent properties. Thus, this paper will review the production of artificial lightweight aggregate through various methods, including sintering, cold bonding, and autoclaving. The significant properties of artificial lightweight aggregate, including physical and mechanical properties, such as water absorption, crushing strength, and impact value, are reviewed. The properties of concrete, including thermal properties, that utilized artificial lightweight aggregate were also briefly reviewed to highlight the advantages of artificial lightweight aggregate.