Noorina Hidayu Jamil
Thumbnail Image
Preferred name
Noorina Hidayu Jamil
Official Name
Noorina Hidayu, Jamil
Alternative Name
Jamil, Noorina Hidayu
Noorina, H. J.
Noorina, J. H.
Jamil, N. H.
Main Affiliation
Scopus Author ID
25639632500
Researcher ID
FBC-8988-2022

Research Output

Filters

1 1
13
Reset filters

Settings
Now showing 1 - 10 of 13
  • Publication
    Assessment of the suitability of ceramic waste in geopolymer composites: an appraisal
    ( 2021)
    Ismail Luhar
    ;
    Salmabanu Luhar
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Marcin Nabiałek
    ;
    Andrei Victor Sandu
    ;
    Janusz Szmidla
    ;
    Anna Jurczyńska
    ;
    Rafiza Abdul Razak
    ;
    Ikmal Hakem A Aziz
    ;
    Noorina Hidayu Jamil
    ;
    Laila Mardiah Deraman
    Currently, novel inorganic alumino-silicate materials, known as geopolymer composites, have emerged swiftly as an ecobenevolent alternative to contemporary ordinary Portland cement (OPC) building materials since they display superior physical and chemical attributes with a diverse range of possible potential applications. The said innovative geopolymer technology necessitates less energy and low carbon footprints as compared to OPC-based materials because of the incorporation of wastes and/or industrial byproducts as binders replacing OPC. The key constituents of ceramic are silica and alumina and, hence, have the potential to be employed as an aggregate to manufacture ceramic geopolymer concrete. The present manuscript presents a review of the performance of geopolymer composites incorporated with ceramic waste, concerning workability, strength, durability, and elevated resistance evaluation.
  • Publication
    Sustainable geopolymer adsorbents utilizing silica fume as a partial replacement for metakaolin in the removal of copper ion from synthesized copper solution
    (Elsevier Ltd, 2025-07)
    Pilomeena Arokiasamy
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Eva Arifi
    ;
    Noorina Hidayu Jamil
    ;
    Md Azree Othuman Mydin
    ;
    Andrei Victor Sandu
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Shafiq Ishak
    Biochar has great significance for controlling heavy metal pollution. Nevertheless, its application is impeded by certain shortcomings, such as a limited adsorption capacity, a slow adsorption rate, and poor reusability. Besides, the physical adsorption capacity of raw biochar to heavy metals is suboptimal. As a result, researchers prefer to use geopolymer-based adsorbents for the removal of heavy metals due to their excellent immobilization effect. However, no research has been done on the synthesis of geopolymer-based adsorbent using silica fume for heavy metal adsorption. Thus, the aim of this study is to partially replace metakaolin (MK) with silica fume (S1) (25, 50, 75 and 100 %) in geopolymer formulation at varied S:L ratio (0.4, 0.6, 0.8 and 1.0) to study the impact on the geopolymerization and its following properties in the removal efficiency of copper (Cu2 +). Characterization techniques such as Energy dispersive X-ray fluorescence (EDXRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM) and Energy dispersive X-ray spectroscopy (EDX) were used to study the physicochemical properties of the developed geopolymer. The concentration of Cu2+ before and after adsorption was determined by Atomic absorption spectroscopy (AAS) and the removal efficiency was calculated. Based on the experimental result, the geopolymer prepared with 25 % MK and 75 % S1 at S:L of 0.6 maintained the high removal efficiency of Cu2+ (99.62 %) with 100 % MK geopolymer (98.56 %). The generation of N-A-S-H gel with the 75 % replacement level of S1 producing more reactive Si and Al binding sites for Cu2+ adsorption. In addition, S1 contains exchangeable cations such as Ca2+, Mg2+ and Na+ which further promote the adsorption of Cu2+ by ion exchange. Moreover, the mechanisms such as chemical bonding and precipitation were involved in the adsorption of Cu2+. Hence, this research could serve as a basis for the development of solid waste based geopolymers that could remove heavy metal ions from aqueous solution.
  • Publication
    Metakaolin/sludge based geopolymer adsorbent on high removal efficiency of Cu2+
    ( 2022)
    Pilomeena Arokiasamy
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Mohd Remy Rozainy Mohd Arif Zainol
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Marwan Kheimi
    ;
    Jitrin Chaiprapa
    ;
    Andrei Victor Sandu
    ;
    Petrica Vizureanu
    ;
    Rafiza Abd Razak
    ;
    Noorina Hidayu Jamil
    Activated carbon (AC) has received a lot of interest from researchers for the removal of heavy metals from wastewater due to its abundant porous structure. However, it was found unable to meet the required adsorption capacity due to its amorphous structure which restricts the fundamental studies and structural optimization for improved removal performance. In addition, AC is not applicable in large scale wastewater treatment due its expensive synthesis and difficulty in regeneration. Thus, the researchers are paying more attention in synthesis of low cost geopolymer based adsorbent for heavy metal removal due its excellent immobilization effect. However, limited studies have focused on the synthesis of geopolymer based adsorbent for heavy metal adsorption by utilizing industrial sludge. Thus, the aim of this research was to develop metakaolin (MK) based geopolymer adsorbent with incorporation of two types of industrial sludge (S1 and S3) that could be employed as an adsorbent for removing copper (Cu2+) from aqueous solution through the adsorption process. The effects of varied solid to liquid ratio (S/L) on the synthesis of metakaolin/sludge based geopolymer adsorbent and the removal efficiency of Cu2+ by the synthesis adsorbent were studied. The raw materials and synthesized geopolymer were characterized by using x-ray fluorescence (XRF), x-ray diffraction (XRD), scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) and micro XRF. The concentration of Cu2+ before and after adsorption was determined by atomic absorption spectroscopy (AAS) and the removal efficiency was calculated. The experimental data indicated that the synthesized geopolymer at low S/L ratio has achieved the highest removal efficiency of Cu2+ about 99.62 % and 99.37 % at 25 %:75 % of MK/S1 and 25 %:75 % of MK/S3 respectively compared to pure MK based geopolymer with 98.56 %. The best S/
      1  28
  • Publication
    Phase transformation of Kaolin-ground granulated blast furnace slag from geopolymerization to sintering process
    ( 2021-03-01)
    Noorina Hidayu Jamil
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Faizul Che Pa
    ;
    Hasmaliza M.
    ;
    Wan Mohd Arif W Ibrahim
    ;
    Aziz I.H.A.
    ;
    Jeż B.
    ;
    Nabiałek M.
    The main objective of this research was to investigate the influence of curing temperature on the phase transformation, mechanical properties, and microstructure of the as-cured and sintered kaolin-ground granulated blast furnace slag (GGBS) geopolymer. The curing temperature was varied, giving four different conditions; namely: Room temperature, 40, 60, and 80â—¦ C. The kaolin-GGBS geopolymer was prepared, with a mixture of NaOH (8 M) and sodium silicate. The samples were cured for 14 days and sintered afterwards using the same sintering profile for all of the samples. The sintered kaolin-GGBS geopolymer that underwent the curing process at the temperature of 60â—¦ C featured the highest strength value: 8.90 MPa, and a densified microstructure, compared with the other samples. The contribution of the Na2 O in the geopolymerization process was as a self-fluxing agent for the production of the geopolymer ceramic at low temperatures.
      2
  • Publication
    DFT Study of Thermoelectric Performance of SrTiO₃ Doped by Tantalum
    (Universiti Malaysia Perlis (UniMAP), 2019-10)
    Akeem Adekunle Adewale
    ;
    Abdullah Chik
    ;
    Ruhiyuddin Mohd Zaki
    ;
    Faizul Che Pa
    ;
    Yeoh Cheow Keat
    ;
    Noorina Hidayu Jamil
    This paper deals with enhancement of thermoelectric performance of SrTiO₃ - a perovskite-based material by doping Ti-site with Ta. The electronic and the thermoelectric transport properties of doped SrTiO₃ were studied using the first principle calculation in full-potential of density functional theory. Spin-orbit coupling including Hubbard U parameter influences were observed in the investigation. Energy band structure and electron density of state were determined for electronic properties. The Seebeck coefficients, thermal conductivity, electrical conductivity as well as thermoelectric efficiency ZT were calculated for thermoelectric properties. The results of our calculations revealed that narrowing the bandgap of the material leads to the increase of thermoelectric efficiency ZT. At spin-orbit coupling with DFT+U method, ZT of 0.18 at 750 K were obtained and this is similar to the experimental data reported.
      1
  • Publication
    Effect of acid leaching on different state of rice husk
    (Trans Tech Publications Ltd., 2020)
    Nur Haslinda Mohamed Muzni
    ;
    Noorina Hidayu Jamil
    ;
    Faizul Che Pa
    ;
    Wan Mohd Arif W Ibrahim
    Rice husks (RH) are agricultural wastes available abundantly in rice producing country. A by-product obtained from combustion of rice husk is rice husk ash (RHA) which is rich in silica (SiO2) contents. This paper focused on the effect of acid leaching treatment on rice husk to produce high-purity silica. There are 4 different states of conditions involved; raw rice husk (RRH), treated rice husk (TRH), rice husk ash (RHA), and treated rice husk ash (TRHA). Citric acid; C6H8O7 was used as a leaching agent. TRH and TRHA was leached to see whether treated rice husk before combustion (TRH) or treated rice husk after combustion (TRHA) will produce more high-purity silica. Chemical composition analysis shows high amorphous silica content which is 98.47% with low metallic impurities at 1.0 M C6H8O7, 70 ºC for treated rice husk (TRH). X-ray diffraction (XRD) pattern shows the presence of amorphous silica in treated rice husk (TRH) and crystalline silica in treated rice husk ash (TRHA). Fragmentation of TRH into small pieces after acid leaching is seen where there is significant increase in the exposed surface areas. High-purity amorphous silica with more than 98% was prepared via citric acid leaching treatment and combustion process.
      1  19
  • Publication
    Hydroxyapatite/Dolomite alkaline activated material reaction in the formation of low temperature sintered ceramic as adsorbent materials
    ( 2022-09-26)
    Kamarzamann F.F.
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Abdul Kadir A.
    ;
    Noorina Hidayu Jamil
    ;
    Wan Mastura Wan Ibrahim
    ;
    Victor Sandu A.
    Hazardous pollutants, especially heavy metals in wastewater, have become a major concern due to the high potential of causing serious problems to humans and aquatic ecosystems, such as adverse health effects, environmental damage, and air pollution. The adsorption process is widely used to remove heavy metals because it is inexpensive, simple, and environmentally friendly. However, recent studies have shown that some adsorbents such as activated carbon, ion exchange resins, and carbon nanotubes are becoming more expensive due to their complex production. Considering these problems, alkali-activated materials (AAMs) can be considered as a new potential adsorbent material due to their excellent physical, chemical, and mechanical properties, which make them suitable for use in the field of civil engineering. Dolomite is one of the AAMs that is capable of adsorbing hazardous pollutants such as heavy metals in wastewater due to its unique structure. This material is also classified as a cost-effective adsorbent because it is abundant and can be found all over the world. Nevertheless, few studies have focused on the adsorption method using dolomite as a precursor material to remove heavy metals in wastewater, and currently only limited studies focus on the relationship between dolomite and hydroxyapatite (HAP). In addition, some studies have shown that the properties of geopolymers can be improved (up to 40%) when a moderate amount of calcium-containing material is added to the geopolymer. Although they have been used as a stand-alone material with excellent properties, combining them with another material could be another way to improve their properties. Therefore, this review provides an in-depth analysis on the properties of dolomite as a new potential precursor material in combination with HAP for contaminant removal. This would help to find the best parameters for the geopolymerization process between dolomite and HAP to meet the adsorption method requirements. This paper also investigated the ability of HAP as a carrier with the combination of bacterial strains via an immobilization process to improve the properties of dolomite as a geopolymer adsorbent. A microbial community can also act as an adsorbent for the removal of heavy metals and inorganic/organic contaminants from wastewater. This review can serve as a basis for understanding the ability of dolomite/HAP as a new alkali-activated material in geopolymer adsorbents in combination with immobilizing bacteria to remove heavy metals in wastewaters.
      2  27
  • Publication
    Alkaline-Activation technique to produce low-temperature sintering activated-HAp ceramic
    ( 2023)
    Wan Mohd Arif W Ibrahim
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Noorina Hidayu Jamil
    ;
    Hasmaliza Mohamad
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Andrei Victor Sandu
    ;
    Petrica Vizureanu
    ;
    Madalina Simona Baltatu
    ;
    Patimapon Sukmak
    The fabrication of hydroxyapatite (HAp) ceramics prepared by existing conventional sintering requires high-temperature sintering of 1250 °C to 1300 °C. In this paper, the activated metakaolin (MK)/HAp specimens were prepared from varied mix design inputs, which were varied solid mixtures (different amounts of MK loading in HAp) and liquid-to-solid (L/S) ratios, before being pressed and sintered at 900 °C. Phase analysis, thermal analysis, surface morphology, and tensile strength of the specimens were investigated to study the influences of the Al, Si, Fe, Na, and K composition on the formation of the hydroxyapatite phase and its tensile strength. XRD analysis results show the formation of different phases was obtained from the different mix design inputs HAp (hexagonal and monoclinic), calcium phosphate, sodium calcium phosphate silicate and calcium hydrogen phosphate hydrate. Interestingly, the specimen with the addition of 30 g MK prepared at a 1.25 L/S ratio showed the formation of a monoclinic hydroxyapatite phase, resulting in the highest diametrical tensile strength of 12.52 MPa. Moreover, the increment in the MK amount in the specimens promotes better densification when sintered at 900 °C, which was highlighted in the microstructure study. This may be attributed to the Fe2O3, Na2O, and K2O contents in the MK and alkaline activator, which acted as a self-fluxing agent and contributed to the lower sintering temperature. Therefore, the research revealed that the addition of MK in the activated-HAp system could achieve a stable hydroxyapatite phase and better tensile strength at a low sintering temperature.
      2  25
  • Publication
    Fundamental study on processing and characterization of kaolin-modified ground granulated blast furnace slag ceramic via geopolymerization process
    ( 2021)
    Noorina Hidayu Jamil
    Kaolin which is theoretically known having low reactivity during geopolymerization will be used as a source of aluminosilicate materials in this study. Current research had pretreated the kaolin via thermal, mechanical and chemical treatment before geopolymerization. Due to this concern, it becomes a challenge to directly produce kaolin geopolymer without pre-treatment. Hence addition of ground granulated blast furnace slag (GGBS) will accelerate the geopolymerization process. Kaolin-GGBS geopolymer ceramic can be prepared at low sintering temperature due to the reaction of chemical composition during the initial stage of geopolymerization. The objective of this work is to study the influence of the chemical composition in raw materials, curing temperature and sintering temperature on the sintered kaolin-GGBS geopolymer. The ratio of solid-to-liquid chosen were 1:1, 1.5:1, and 2:1 to analyze the contribution of chemical composition. The effect of curing temperature will be a study based on four different temperature, which is, room temperature, 40 °C, 60 °C and 80 °C. The last parameter chosen was the sintering temperature varied at 800 °C, 900 °C, 1000 °C and 1100 °C. The optimum ratio of solid to liquid obtained was 2:1 (SL 2) with densified microstructure. The addition of GGBS to the kaolin geopolymer slurry did not only hasten the hardening process during geopolymerization, the presence of CaO, and MgO in GGBS had accelerated the formation of nepheline, gehlenite, akermanite, and albite phase after sintering. Elemental distribution from micro-XRF investigation proves the high concentration of Ca in a localized area and uniformly distribution of Si aligned with the phase of akermanite in SL 2. The curing temperature at 60 °C had resulted the highest compressive strength after the sintering process. This is due to the densified microstructure with open pores in the structure of sintered kaolin-GGBS geopolymer. It can be clearly seen the phase transformation from as-cured to sintered geopolymer. Transformation of the main crystalline phase which is kaolinite to nepheline phase due to reaction with alkali activator. Kaolin-GGBS geopolymer was prepared with a ratio of solid to liquid 2:1 and 60 °C of curing temperature were prepared for the last parameter varied, which are sintering temperature. Sintering at 900 °C had resulted in the highest compressive strength due to the formation of densified microstructure. The formation of akermanite phase had contributed to the densification. The sintering temperature exceeds than 900 °C had led to the formation of interconnected pores due to the decomposition and vapourisation of CaCO3. Meanwhile, sintering at 800 °C indicates an incomplete geopolymerization process. Thermal analysis shows the stability of sintered kaolin-GGBS geopolymer when being exposed to 1100 °C. Therefore, it proves that kaolin can be directly used without heat treatment in geopolymer. The geopolymerization process had facilitated the stability of as cured samples to be directly sintered besides playing a significant role as a self-fluxing agent to reduce the temperature in producing sintered kaolin-GGBS geopolymer.
      29  1