Nur Farhana Diyana Mohd Yunos
Thumbnail Image
Preferred name
Nur Farhana Diyana Mohd Yunos
Official Name
Nur Farhana Diyana, Mohd Yunos
Alternative Name
Yunos, Nur Farhana Mohd
Yunos, Nur Farhana M.
Mohd Yunos, Nur Farhana
Yunos, N. F.
Yunos, N. F.M
Nur Yunos, F.
Yunos, Nur F.
Yunos, N. F.D.M.
Yunos, M.
Yunus, Nur Farhana M.
Main Affiliation
Scopus Author ID
44062005100
Researcher ID
I-2598-2019

Research Output

Filters

4 2 1
1
4
Reset filters

Settings
Now showing 1 - 4 of 4
  • Publication
    Correlation between crystal structure and thermal reaction of TiOâ‚‚ - Graphene Oxide
    ( 2021-04)
    Siti Kartom Kamarudin
    ;
    Muhammad Asri Idris
    ;
    Nur Farhana Diyana Mohd Yunos
    ;
    Banjuraizah Johar
    ;
    Ho Li Ngee
    ;
    Syarifah Norfaezah Sabki
    ;
    Suhaimi Illias
    TiO₂ - Graphene oxide (GO) (GO = 0-1.0wt %) powders were synthesised using sol-gel method and annealed at 500°C. The samples were then characterised using X-ray diffraction (XRD). The additional of GO gave significant influence on the crystal structure of TiO₂. The lattice parameter of TiO₂ were increased with decreasing GO concentration. The unit cell volume of TiO₂-GO annealed in N2 decreased with the oxygen occupancy. In contrary, the TiO₂-GO annealed in O₂ has an increase in O₂ occupancies in the lattice that was nearly proportional to its unit cell volume. A continuous weight loss was recorded by TGA at a temperature range of T= 30 - 1000°C that were associated with H2O, C-H and C-O species. It is concluded that the Ti-O-C and Ti-C bonds were formed for samples annealed in O₂ and N2 respectively. The weight loss of TiO₂-GO annealed in O₂ is lesser than that annealed in N2 for same concentration additional GO into TiO₂.
  • Publication
    Phase reduction and thermodynamic analysis of Ilmenite Ore by carbothermal-iodination using different carbon reductants
    ( 2023-12)
    N. A. Nasrun
    ;
    Nur Farhana Diyana Mohd Yunos
    ;
    Muhammad Asri Idris
    ;
    Sri Raj Rajeswari Munusamy
    ;
    N. Takahiro
    ;
    S. A. Rezan
    The present study is on the combination of carbothermal reduction and iodination reaction (carboiodination) process for the phase reduction of ilmenite ore (FeTiO3). The aim is to understand the phase reduction and thermodynamic reaction analysis of ilmenite ore by a combined method of carbothermal-iodination using different carbon reductants (graphite and palm char). Graphite was used as a standard carbon reductant while palm char as a renewable carbon reductant was prepared via the pyrolysis technique. Ilmenite was mixed with carbon reductants and then first reduced by using a carbothermal reduction process at 1550℃. Then, the reduced samples were further investigated with iodination reaction in different temperature ranges of 900-1000 °C using a vertical tube furnace with mixed argon and iodine gas (0.2 L/min). The proximate and ultimate analyses of carbon reductants were analysed by CHON analyser and their microstructure by using SEM, while XRF and XRD were used for analyzing the chemical compositions and the phase reductions of raw ilmenite ore and reduced samples, respectively. The thermodynamics of possible reactions during carbothermal-iodination reactions were calculated by HSC Chemistry 6.0 software. By comparing graphite and palm char, palm char had an amorphous structure, with porous and high carbon content showing high potential for usage as a reductant in titanium extraction from ilmenite ore. The phases of ilmenite ore were ilmenite, rutile, and anatase transformed into rutile, pseudobrookite, and titanium oxide detected by XRD. Further reduction was performed by palm char where more rutile (TiO2) and titanium oxide (Ti3O5) developed from the iodination reaction at the highest temperature compared to graphite due to better properties and amorphous structure. The rutile and titanium oxide were found as stable phases from the thermodynamic analysis and confirmed with XRD. From the findings, the combination of carbothermal-iodination of ilmenite ore was possible and promising for rutile (TiO2) production in mineral extractions.
  • Publication
    Investigation on phase evaluation of ilmenite ore by carbothermal reduction and carboiodination reaction
    ( 2023-12)
    A. A. Adel
    ;
    Nur Farhana Diyana Mohd Yunos
    ;
    Muhammad Asri Idris
    ;
    L. I. G. Togang
    This article presented the thermochemical calculation and experimental investigation on the phase evaluation of ilmenite ore (FeTiO3) via carbothermal reduction and carboiodination reaction for titanium production using graphite as a reducing agent. The carbothermal reduction and carboiodination reactions were performed in two different furnaces. The carbothermal reduction was evaluated at a temperature of 1550°C with inert argon gas utilizing a horizontal tube furnace. The carboiodination reactions were evaluated in temperatures ranging from 900°C, 950°C, and 1000°C using a vertical tube furnace with mixed iodine gas with argon gas. XRF and XRD were used for analyzing the chemical compositions and the phase evolutions of raw ilmenite ore and the reduced samples, respectively. The findings showed that the Perak ilmenite ore predominantly has a greater concentration of TiO2 (71.27wt%), Fe2O3 (18.85wt%), and some other oxides like aluminum oxide and quartz. In addition, XRD revealed that the ilmenite phase was converted into rutile (TiO2) titanium oxide (Ti3O5, Ti2O3), titanium carbide (TiC), and iron (Fe) phases, after the carbothermal reduction process. However, after the carboiodination reaction, the ilmenite and rutile phases remained at temperatures 900°C, 950°C, and 1000°C. The HSC Chemistry software was used in the determination of the thermochemical calculation and the possible reactions during the reaction which play an important role in shortening the reduction process. The results revealed the carboiodination process is a promising process that can reduce energy consumption and shorten the titanium production processes, and it needs more studies.
  • Publication
    Phase transformations of Langkawi ilmenite ore during carbothermal reduction using palm char as renewable reductant
    ( 2022-02-01)
    Mohammed A.I.
    ;
    Nur Farhana Diyana Mohd Yunos
    ;
    Muhammad Asri Idris
    ;
    Nur Hazira Najmi
    ;
    Zul Azhar Zahid Jamal
    ;
    Nomura, Takahiro
    The phase transformations of carbothermal reduction of Langkawi ilmenite ore by palm char were studied in reduction temperatures ranging from 1200 °C, 1300 °C, and 1400 °C using a horizontal tube furnace with inert argon gas. The palm shells as renewable carbon reductant for carbothermal reduction of ilmenite ore were converted into palm char using pyrolysis techniques to improve and increase the surface area and carbon content. The present study aims to reduce oxides in ilmenite ore from our local mining to produce titanium oxides by carbothermal reduction process and recycled agricultural waste from palm shell as renewable reductant. The phase and chemical compositions of ilmenite ore and reduced samples were analyzed by XRD and XRF. It was found that ilmenite ore mainly contained titanomagnetite, hematite, and titanium dioxide phases. After carbothermal reduction, the titanomagnetite phase from ilmenite ore was transformed into titanium dioxide, iron titania, iron, and titanium carbide at the highest reduction temperature (1400 °C) via XRD analysis. The phase transformation revealed the porous structure with wider pore size distribution and high carbon from palm char was able to reduce the oxides in ilmenite ore. According to XRF analysis, the TiO2 amount was increased with the temperature; from 25.7 wt.% at 1200 °C up to 50.8 wt.% with the extent of reduction of TiO2 was 78.56% at 1400 °C. The carbothermal reduction of ilmenite ore using palm char as a renewable reductant was possible and promising in mineral ore extractions.