Wan Mastura Wan Ibrahim
Thumbnail Image
Preferred name
Wan Mastura Wan Ibrahim
Official Name
Wan Mastura, Wan Ibrahim
Alternative Name
Mastura Wan Ibrahim, Wan
Ibrahim, W. M.H.W.
Ibrahim, Wan Mastura Wan
Main Affiliation
Scopus Author ID
56526451500
Researcher ID
AGI-2890-2022

Research Output
Now showing 1 - 2 of 2
  • Publication
    Phase analysis of different liquid ratio on Metakaolin/Dolomite geopolymer
    ( 2021)
    Ahmad Syauqi Sauffi
    ;
    Wan Mastura Wan Ibrahim
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Masdiyana Ibrahim
    ;
    Romisuhani Ahmad
    ;
    Fakhryna Ahmad Zaidi
    Geopolymer is widely studied nowadays in various scope of studies. Some of the ongoing studies are the study of the various materials towards the geopolymer strength produced. Meanwhile, some of the studies focus on the mixing of the geopolymer itself. This paper discussed the phase analysis of metakaolin/dolomite geopolymer for different solid to the liquid ratio which was, 0.4, 0.6, 0.8, and 1.0, and the properties that affected the geopolymer based on the phases. The constant parameters in this study were the percentage of metakaolin and dolomite used. The metakaolin used was 80% meanwhile dolomite usage was 20%. Besides that, the molarity of NaOH used is 10M and the alkaline activator ratio used is 2.0. All the samples were tested at 28 days of curing. The results show that the 0.8 solid to the liquid ratio used gave better properties compare to other solid to liquid ratio. The phases analyzed were quartz, sillimanite, mullite, and faujasite. The 0.8 S/L ratio shows the better properties compared to others by the test of phase analysis, compressive strength morphology analysis, and functional group analysis.
  • Publication
    Chemical distributions of different Sodium Hydroxide molarities on fly ash/dolomite-based geopolymer
    ( 2022)
    Wan Mastura Wan Ibrahim
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Romisuhani Ahmad
    ;
    Andrei Victor Sandu
    ;
    Petrica Vizureanu
    ;
    Omrane Benjeddou
    ;
    Afikah Rahim
    ;
    Masdiyana Ibrahim
    ;
    Ahmad Syauqi Sauffi
    Geopolymers are an inorganic material in an alkaline environment that is synthesized with alumina–silica gel. The structure of geopolymers consists of an inorganic chain of material and a covalent-bound molecular system. Currently, Ordinary Portland Cement (OPC) has caused carbon dioxide (CO2) emissions which causes greenhouse effects. This analysis investigates the impact on fly ash/dolomite-based-geopolymer with various molarities of sodium hydroxide solutions which are 6 M, 8 M, 10 M, 12 M and 14 M. The samples of fly ash/dolomite-based-geopolymer were prepared with the usage of solid to liquid of 2.0, by mass and alkaline activator ratio of 2.5, by mass. After that, the geopolymer was cast in 50 × 50 × 50 mm molds before testing after 7 days of curing. The samples were tested on compressive strength, density, water absorption, morphology, elemental distributions and phase analysis. From the results, the usage of 8 M of NaOH gave the optimum properties for the fly ash/dolomite-based geopolymer. The elemental distribution analysis exposes the Al, Si, Ca, Fe and Mg chemical distribution of the samples from the selected area. The distribution of the elements is related to the compressive strength and compared with the chemical composition of the fly ash and dolomite.
      1  4