Nur Izzati Iberahim
Thumbnail Image
Preferred name
Nur Izzati Iberahim
Official Name
Nur Izzati, Iberahim
Alternative Name
Berahim, Nurizzati
Iberahim, N. I.
Main Affiliation
Scopus Author ID
57200276640

Research Output

Filters

3
1
Reset filters

Settings
Now showing 1 - 3 of 3
  • Publication
    Synthesis and characterization of carboxymethyl cellulose derived from office paper waste for methylene blue dye removal
    ( 2021-02-23)
    Nor Aida Yusoff
    ;
    Yee L.Y.
    ;
    Nur Izzati Iberahim
    ;
    Noor Ainee Zainol
    ;
    Sriyana Abdullah
    ;
    Siti Nazrah Zailani
    The aim of this research was to extract cellulose from office paper waste and converted into carboxymethyl cellulose (CMC) based flocculant to treat methylene blue (MB) dye solution. The yield of extracted cellulose obtained was 62.17%. Three different CMC samples were prepared. Degree of substitution (DS) for CMC-1 is 0.6585, CMC-2 is 0.8124 and CMC-3 is 0.8946. This proved that CMC are substituted into cellulose structure due to the DS of the commercial CMC are in the range of 0.4 to 1.5. The coagulation flocculation process of the MB dye shows that the CMC-3 was effective for methylene blue dye removal with highest percentage (98.14%) at pH 9.0, flocculant dosage of 210 ppm with 100 ppm MB concentration solution.
  • Publication
    Hydrogen sulfide removal from fermentative biohydrogen process: Effect of ZSM-5 zeolite loading
    ( 2024-03-01)
    Asman M.K.A.
    ;
    Nabilah Aminah Lutpi
    ;
    Wong Y.S.
    ;
    Hanif M.A.
    ;
    Ong Soon An
    ;
    Farrah Aini Dahalan
    ;
    Nur Izzati Iberahim
    ;
    Hamdzah M.
    The production and consumption of biohydrogen is growing because it is a “green,” renewable energy that can be obtained in a relatively cost-effective manner through anaerobic digestion. Biohydrogen produced from biomass is a viable source of renewable energy; nevertheless, the presence of highly toxic and corrosive hydrogen sulfide (H2S) in the process can hinder the quality of biohydrogen production and limit its application in energy conversion equipment. Consequently, the goal of the research was to assess the feasibility of using ZSM-5 zeolite for H2S adsorption that function as activating agent to enhance biohydrogen quality under thermophilic conditions. The effect of ZMS-5 Zeolite loading (0.2–1.0 g) on biohydrogen production via dark fermentation from mixed fruit waste (MFW) was investigated using anaerobic sludge from a sewage treatment plant. The pH of the broth mixture was adjusted to 6.0, anaerobic conditions were created by purging it with nitrogen gas, and the temperature of the fermentative biohydrogen process was maintained at 60°C. Meanwhile, the H2S adsorption test was run at ambient temperature with flow rates (100 ml/min) and an H2S inlet concentration of 10000 ppm. The results indicate that the Z + H2S exhibit spectral lines corresponding to the S-H asymmetric stretching vibration of H2S at 2345.97 cm−1. The ideal adsorption capacity is at 0.8 g with yet, increasing the dosage amount of adsorbents, increases the time required for the adsorbent to achieve 90% saturation. The non-linear curve fitting demonstrated that the adsorption kinetics of all dosages used followed those of the Avrami kinetic model. This approach of using ZSM-5 zeolite for H2S removal provides an advantage in terms of minimizing environmental pollution and having great potential uses in industrial processes.
  • Publication
    Ammonium adsorption - Desorption using rice husk biochar
    ( 2021-05-24)
    Khairunissa Syairah Ahmad Sohaimi
    ;
    Nur Izzati Iberahim
    ;
    Ghani A.A.
    ;
    Zafifah Zamrud
    ;
    Heng C.W.
    Rice husk was utilized into biochar by pyrolysis and used as adsorbent for ammonium removal. Rice husk biochar (RHB) was produced at temperature of 3500C, 4000C, 4500C, 5000C, and 5500C. Characteristics of biochar were analyzed by moisture content, ash content, pH Zero Charge and Fourier Transform Infrared (FTIR) Spectroscopy. As the temperature for the pyrolysis increases, the moisture content of RHB decreases while the ash content of RHB increases. From the pH zero charge analysis, the value obtained from analysis is pH 7. The FTIR spectra showed the organic part of RHB with different functional groups such as alkene, alcohol, phenol, ether, ester etc. Based on the result of the characterization test, RHB500 was chosen as the best biochar for the adsorption of ammonium. The equilibrium contact time was 180 minutes and the optimum adsorbent dosage was 0.1g and the optimum concentration of ammonium was 1.2 ppm. For the adsorption-desorption of ammonium, RHB can run up to 5 cycles for biochar regeneration. Adsorption kinetic, pseudo-second-order model is more preferable than pseudo-first-order model because R2 value is 0.9995 which closer to 1.