Nur Izzati Muhammad Nadzri
Thumbnail Image
Preferred name
Nur Izzati Muhammad Nadzri
Official Name
Nur Izzati, Muhammad Nadzri
Alternative Name
Nadzri, Nur Izzati Muhammad
Muhammad Nadzri, Nur Izzati M
Muhd Nadzri, Nur Izzati
Muhammad Nadzri, Nur Izzati
Nadzri, Nur Izzati Muhd
Nadzri, Nur Izzati Muhammad
Main Affiliation
Scopus Author ID
57220777511
57192744206

Research Output

Filters

1
Reset filters

Settings
Now showing 1 - 1 of 1
  • Publication
    Effect of temperature and amount of Ag on TiO₂ thin film synthesised via sol–gel method
    (Springer, 2025-02)
    Dewi Suriyani Che Halin
    ;
    Kamrosni Abdul Razak
    ;
    Dharshini Karikalan
    ;
    Lukasz Kaczmarek
    ;
    Sebastian Miszczak
    ;
    Ayu Wazira Azhari
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Nur Izzati Muhammad Nadzri
    ;
    Juyana A. Wahab
    ;
    Mohd. Mustafa Al Bakri Abdullah
    TiO₂ sol was produced via the sol–gel method with different amounts of AgNO₃ as the source of Ag. The Ag/TiO₂ thin film was obtained by spin coating and was annealed at various annealing temperatures (300°C, 400°C and 500°C) for 1 h. The effect of different amounts of AgNO₃ and different annealing temperatures on the TiO₂ thin films was studied by characterising the phase composition, surface morphology and water contact angle. Results from the x-ray diffraction (XRD) pattern show that with the addition of AgNO₃, Ag/TiO₂ can be formed at low annealing temperatures (300°C). At increased annealing temperatures (400°C and 500°C) and amounts of AgNO₃ (1.0 ml and 1.5 ml), Ag₂O and Ag₃O4 phases were observed. Flakes or flaky islands were formed on the thin film due to thermal expansion mismatch between the film and substrate, residual stress within the film or the release of volatile species when annealed at a low temperature of ⁓300°C. Increasing the temperature to 500°C resulted in the growth and coalescence of the flaky islands by the surface diffusion of adsorbed atoms (adatoms) and their annexation to the surface of existing nuclei. The water contact angle provides valuable insight into the surface interactions between water droplets and the surface of Ag/TiO₂ thin films. It was found that at 1.5 ml AgNO₃, the increased annealing temperature from 300°C to 500°C decreased the water contact angle of Ag/TiO₂ thin films from 83.86° to 34.62°, forming superhydrophilic properties, which indicated its excellent potential as a photocatalyst.