Mohd Firdaus Omar
Thumbnail Image
Preferred name
Mohd Firdaus Omar
Official Name
Mohd Firdaus, Omar
Alternative Name
Omar, Mohd Firdaus
Mohd, Firdaus Omar
Omar, M. F.
Omar, Mohdfirdaus
Omar, Mohd F.
Main Affiliation
Scopus Author ID
36149536300
Researcher ID
U-8459-2019

Research Output

Filters

4 3
2
4
Reset filters

Settings
Now showing 1 - 4 of 4
  • Publication
    Mechanical and dielectric properties of hybrid carbon nanotubes-woven glass fibre reinforced epoxy laminated composites via the electrospray deposition method
    ( 2021)
    Muhammad Razlan Zakaria
    ;
    Nur Aishahatul Syafiqa Mohammad Khairuddin
    ;
    Mohd Firdaus Omar
    ;
    Hazizan Md Akil
    ;
    Muhammad Bisyrul Hafi Othman
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Sam Sung Ting
    ;
    Azida Azmi
    Herein, the effects of multi-walled carbon nanotubes (CNTs) on the mechanical and dielectric performance of hybrid carbon nanotube-woven glass fiber (GF) reinforced epoxy laminated composited are investigated. CNTs are deposited on woven GF surface using an electrospray deposition method which is rarely reported in the past. The woven GF deposited with CNT and without deposited with CNT are used to produce epoxy laminated composites using a vacuum assisted resin transfer moulding. The tensile, flexural, dielectric constant and dielectric loss properties of the epoxy laminated composites were then characterized. The results confirm that the mechanical and dielectric properties of the woven glass fiber reinforced epoxy laminated composited increases with the addition of CNTs. Field emission scanning electron microscope is used to examine the post damage analysis for all tested specimens. Based on this finding, it can be prominently identified some new and significant information of interest to researchers and industrialists working on GF based products
  • Publication
    Enhancement of tensile properties of glass fibre epoxy laminated composites reinforced with carbon nanotubes interlayer using electrospray deposition
    ( 2021)
    Muhammad Razlan Zakaria
    ;
    Mohd Firdaus Omar
    ;
    Hazizan Md Akil
    ;
    Muhammad Bisyrul Hafi Othman
    ;
    Mohd. Mustafa Al Bakri Abdullah
    The introduction of carbon nanotubes (CNTs) onto glass fibre (GF) to create a hierarchical structure of epoxy laminated composites has attracted considerable interest due to their merits in improving performance and multifunctionality. Field emission scanning electron microscopy (FESEM) was used to analyze the woven hybrid GF-CNT. The results demonstrated that CNT was successfully deposited on the woven GF surface. Woven hybrid GF-CNT epoxy laminated composites were then prepared and compared with woven GF epoxy laminated composites in terms of their tensile properties. The results indicated that the tensile strength and tensile modulus of the woven hybrid GF-CNT epoxy laminated composites were improved by up to 9% and 8%, respectively compared to the woven hybrid GF epoxy laminated composites.
  • Publication
    Mechanical and dielectric properties of hybrid carbon nanotubes-woven glass fibre reinforced epoxy laminated composites via the electrospray deposition method
    ( 2022-01-01)
    Muhammad Razlan Zakaria
    ;
    Nur Aishahatul Syafiqa Khairuddin
    ;
    Mohd Firdaus Omar
    ;
    Akil H.M.
    ;
    Othman M.B.H.
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Shayfull Zamree Abd. Rahim
    ;
    Sam Sung Ting
    ;
    Azida Azmi
    Herein, the effects of multi-walled carbon nanotubes (CNTs) on the mechanical and dielectric performance of hybrid carbon nanotube-woven glass fiber (GF) reinforced epoxy laminated composited are investigated. CNTs are deposited on woven GF surface using an electrospray deposition method which is rarely reported in the past. The woven GF deposited with CNT and without deposited with CNT are used to produce epoxy laminated composites using a vacuum assisted resin transfer moulding. The tensile, flexural, dielectric constant and dielectric loss properties of the epoxy laminated composites were then characterized. The results confirm that the mechanical and dielectric properties of the woven glass fiber reinforced epoxy laminated composited increases with the addition of CNTs. Field emission scanning electron microscope is used to examine the post damage analysis for all tested specimens. Based on this finding, it can be prominently identified some new and significant information of interest to researchers and industrialists working on GF based products.
      1
  • Publication
    Enhancement of tensile properties of glass fibre epoxy laminated composites reinforced with carbon nanotubes interlayer using electrospray deposition
    ( 2022-01-01)
    Muhammad Razlan Zakaria
    ;
    Mohd Firdaus Omar
    ;
    Hazizan Md Akil
    ;
    Muhammad Bisyrul Hafi Othman
    ;
    Mohd. Mustafa Al Bakri Abdullah
    The introduction of carbon nanotubes (CNTs) onto glass fibre (GF) to create a hierarchical structure of epoxy laminated composites has attracted considerable interest due to their merits in improving performance and multifunctionality. Field emission scanning electron microscopy (FESEM) was used to analyze the woven hybrid GF-CNT. The results demonstrated that CNT was successfully deposited on the woven GF surface. Woven hybrid GF-CNT epoxy laminated composites were then prepared and compared with woven GF epoxy laminated composites in terms of their tensile properties. The results indicated that the tensile strength and tensile modulus of the woven hybrid GF-CNT epoxy laminated composites were improved by up to 9% and 8%, respectively compared to the woven hybrid GF epoxy laminated composites.
      3  3