Ahmad Firdaus Ahmad Zaidi
Thumbnail Image
Preferred name
Ahmad Firdaus Ahmad Zaidi
Official Name
Ahmad Firdaus, Ahmad Zaidi
Alternative Name
Ahmad Zaidi, Ahmad Firdaus
Ahmad Firdaus, A. Z.
Zaidi, Ahmad Firdaus Bin Ahmad
Firdaus, A. Z.Ahmad
Main Affiliation
Scopus Author ID
55992689600
Researcher ID
S-8233-2019

Research Output

Filters
Reset filters

Settings
Now showing 1 - 10 of 17
  • Publication
    Investigating the Effect of EEG Channel Location on Emotion Classification using EEG Signal
    ( 2023-01-01)
    Mohd Shuhanaz Zanar Azalan
    ;
    Hisham N.A.W.N.N.
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Jusman Y.
    EEG channel location on emotion classification and the choice of classifier are the factor that significantly impact the emotion recognition accuracy. Currently, there is a gap in the literature concerning the identification of optimal channel locations and classifier choice for effective emotion recognition. This study aims to investigate the influence of EEG channel electrode locations and classifiers on the accuracy of emotion recognition. Emotion classification was conducted using three classifiers namely Neural Network (NN), Support Vector Machine (SVM), and K-Nearest Neighbor (KNN) - on two EEG channels configuration with 62 channels and 32 channels, as well as five separate brain regions: Frontal, Temporal, Central, Parietal, and Occipital. The analysis was performed on the SEED-IV dataset. Features were extracted using Differential Entropy. Result indicates that SVM outperformed NN and KNN across all configurations. When assessing EEG channel location, the 32-channel setup yield higher average accuracies for both SVM (91.07%) and NN (86.63%), whereas the 62-channel setup was optimal for KNN (88.28%). The most significant results were identified in the Parietal and Occipital regions. SVM achieved the highest accuracies in these regions (96.55% in the Parietal and 97.18% in the Occipital), with NN (90.17% in Parietal and 92.65% in Occipital) and KNN (82.76% in Parietal and 92.81% in Occipital). These findings emphasize the crucial roles of the Parietal and Occipital regions, associated with sensory integration and visual processing, in emotion recognition. The study highlights the importance of EEG channel location and classifier selection in enhancing the reliability of EEG-based emotion recognition systems.
  • Publication
    Classification Size of Underground Object from Ground Penetrating Radar Image using Machine Learning Technique
    ( 2023-01-01)
    Mohd Shuhanaz Zanar Azalan
    ;
    Esian T.
    ;
    Hasimah Ali
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Amran T.S.T.
    Ground Penetrating Radar (GPR) is a useful tool in detecting subsurface object or hidden structure defects However, the time-consuming problems and high requirement of professional manpower is required to analyse the GPR data. Machine learning is a tool that endowed with the ability to learn, and it can reduce time taken for the GPR data analysing. To simplify the identification process, a framework is proposed to classify the size of underground metallic pipe by using Histogram of Oriented Gradient (HOG) as a feature extraction algorithm. Two machine learning algorithms namely Support Vector Machines (SVM) and Backpropagation Neural Network were proposed to classify the size of the underground metallic pipe. As a result, the accuracy from the identification is more than 98% for both classifier algorithm.
      1  17
  • Publication
    Reconstruction hyperbola signature of underground object using GPR images for mapping applications
    ( 2024-02-08)
    Masuan N.A.
    ;
    Hasimah Ali
    ;
    Amran T.S.T.
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Kamarudin K.
    ;
    Ahmad M.R.
    Ground penetrating radar has been acknowledged as an effective and efficient technique for non-destructive investigation for near-subsurface exploration that is based on the reflection receiver-transmitter of the antenna when hitting buried objects. An accurate interpretation of GPR data is greatly important in locating and mapping underground objects. Although GPR research has achieved remarkable success, the interpretation of GPR raw data highly depends on the reliance of user experts. Further, unexperienced GPR users are subject to error since the hyperbola signatures may resemble each other. Therefore, this work focuses on the development of a 3D reconstruction of the hyperbola signature of underground objects using GPR images for mapping applications. In this study, 3D reconstruction has been developed based on the Synthetic Aperture Focusing Technique, also known as SAFT. At the first stage, the raw input of GPR images was subjected to zero-time correction and background elimination. Next is the projection of each hyperbola signature by means of B-Scan images to create a 3D image. Then, the resultant 3D images were stacked together, and further 3D interpolation techniques were employed on the images. The experimental studies have been done on GPR data using a metal sphere as a sample. The findings of the study highlight that the SAFT method was able to reconstruct the 3D model of the hyperbola signature and exhibit the ability to provide clues about the location of the underground object through the representation of the voxel point of the images. Based on these results, the SAFT technique provides good insight into the 3D reconstruction of hyperbola signatures using GPR images in mapping applications.
      17  2
  • Publication
    Ground penetrating radar for buried utilities detection and mapping: a review
    ( 2021-12-01)
    Hasimah Ali
    ;
    Ideris N.S.M.
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Amran T.S.T.
    ;
    Ahmad M.R.
    ;
    Rahim N.A.
    ;
    Shazmin Aniza Abdul Shukor
    This paper presents a review on Ground Penetrating Radar (GPR) detection and mapping of buried utilities which have been widely used as non-destructive investigation and efficiently in terms of usage. The reviews cover on experimental design in GPR data collection and survey, pre-processing, extracting hyperbolic feature using image processing and machine learning techniques. Some of the issues and challenges facing by the GPR interpretation particularly in extracting the hyperbolas pattern of underground utilities have also been highlighted.
      16  3
  • Publication
    3D Reconstruction of embedded object using ground penetrating radar
    ( 2023-01-01)
    Fadil N.D.
    ;
    Hasimah Ali
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Kamal W.H.B.W.
    ;
    Basri N.A.M.
    Ground Penetrating Radar (GPR) is a non-destructive device widely used to locate and map underground utilities such as pipes, cables, etc. Its principle is based on the reflection signal of a transmitter-receiver antenna that strikes underground objects by means of the propagation of a short pulse of electromagnetic waves into the ground. The GPR will produce a hyperbolic curve as a result of the object's presence. Accurate interpretation of hyperbola curves is greatly important and highly depends on user expertise; thus, it is considered a challenge. To address this issue, this study aims to develop 3D reconstructions of embedded objects. In this study, C-scan images were acquired, and 3D interpolation and the Synthetic Aperture Focusing Technique (SAFT) were introduced. In this framework, the acquired data is subjected to pre-processing techniques via time-zero correction, background removal using average background subtraction, and Kirchoff's migration method. The software Reflex 3D Scan has been used to analyse and preprocess the 3D reconstruction of embedded objects. The obtained results show that 3D interpolation and SAFT methods are not only able to reconstruct 3D models but are also able to reveal information on the dimension and location of the buried object represented by voxel points in the 3D space cube.
      2  15
  • Publication
    A cascade hyperbolic recognition of buried objects using hybrid feature extraction in ground penetrating radar images
    ( 2021-08-27)
    Hasimah Ali
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Wan Khairunizam Wan Ahmad
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Tengku Amran T.S.
    ;
    Ahmad M.R.
    ;
    Mohamed Elshaikh Elobaid Said Ahmed
    Ground penetrating radar (GPR) has been acknowledged as effective nondestructive technique for imaging the subsurface. But the process of recognizing hyperbolic pattern of buried objects is subjective and mainly relies upon operator's knowledge and experience. This project proposed a hyperbolic recognition of buried objects using hybrid feature extraction in GPR subsurface mapping. In this framework, a cascade hyperbolic recognition by means of Empirical Mode Decomposition (EMD) and Discrete Wavelet Transform (DWT) are used as hybrid feature recognizing hyperbolic of buried objects. The rationale for an initial focus on cascade hyperbolic recognition is motivated by unique features exhibits by EMD and DWT behaviour in characterizing the hyperbolic pattern which make them particularly well suited to utilities detection in GPR. A series of experiments has been conducted on hyperbolic pattern based on hybrid features using four different geometrical shapes of cubic, cylindrical disc and spherical. Based on the results obtained, the hybrid features of IMF1+ wavelet transform (cH1) shows promising recognition rate in recognizing the hyperbolic that having different geometrical shapes of buried objects.
      1
  • Publication
    Design and Development of Cascaded Current Control in DC Motor Variable Speed Drive using dSPACE
    ( 2023-01-01)
    Ahmad Firdaus Ahmad Zaidi
    ;
    Davendren T.
    ;
    Syahrul Ashikin Azmi
    ;
    Leong Jenn Hwai , Jenn
    ;
    Kamarulzaman Kamarudin
    ;
    Hassan A.
    ;
    Hasimah Ali
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Normahira Mamat @ Mohamad Nor
    Even today, DC motors are still used in variety of applications, including home appliances, transportation, as well as industrial crane and rolling machine. However, achieving precise speed and torque control in DC drives at industry level could be challenging, as instability and reduced efficiency remains at large. This project focuses on developing a cascaded control system for a Separately Excited Brushed DC motor using dSPACE platform. The cascaded control system, designed using MATLAB Simulink, incorporates a proportional-integral (PI) controller at the speed loop and a Hysteresis controller at the current loop to improve robustness and dynamic performance. The experimental setup utilizes the dSPACE 1104 platform, an asymmetric bridge converter board, gate driver, and electrical load. Speed measurement is done using an incremental encoder, while current is measured using the ACS712 current sensor. The drive system was tested in alternate low and high speed cycle on various load level to test for stability, robustness and dynamic performance. The proposed control system was compared with PI-closed-loop control and open-loop control determine the best drive performance. Experimental results showed significant improvement in term of transient response and ripple reduction of speed and current for proposed cascaded current control over the closed-loop design.
      5  18
  • Publication
    Rebar Path Mapping using Ground Penetrating Radar
    ( 2023-01-01)
    Basri N.A.B.
    ;
    Hasimah Ali
    ;
    Ahmad M.R.
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Siti Nurul Aqmariah Mohd Kanafiah
    ;
    Jusman Y.
    Ground penetrating radar (GPR) is a non-destructive device that helps to determine the position and direction of underground utilities such as rebar while preventing any inaccurate excavation process. The direction of buried rebar is usually mapped using the X-Y grid scanning method, which requires a lot of manpower and time to complete. Therefore, this paper investigated the ability of parallel scanning of B-scan to imitate the result of C-scan produced by X-Y grid scanning. Parallel scanning has been emphasised to reduce the time consumption of the data acquisition process while delivering a quality output. To develop a rebar path mapping, a data processing step has been implemented on the B-scan data for seven parallel lines that correspond to the x-axis. Next, Kirchhoff migration has been applied along with stacking and interpolation techniques to map a two-dimensional (2-D) image of the buried rebar. The obtained result was then compared with the grid scanning data of C-scan to evaluate the correlation between them. The performance of the mapped rebar path using parallel B-scan data was evaluated based on the ability of the data to give an accurate depth calculation of the buried rebar. Ultimately, the results show that this proposed method for using parallel B-scan to do mapping is verified.
      1
  • Publication
    Assessment of Control Drive Technologies for Induction Motor: Industrial Application to Electric Vehicle
    ( 2021-06-11)
    Ahmad Firdaus Ahmad Zaidi
    ;
    Syahrul Ashikin Azmi
    ;
    Kamarulzaman Kamarudin
    ;
    Leong Jenn Hwai , Jenn
    ;
    Hasimah Ali
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Zamri Che Mat Kasa
    Nowadays electric vehicle has increasingly gained much popularity indicated by growing global share market targeted at 30% by 2030 after recording 7.2million global stock in 2019. Compared to Internal Combustion Engine (ICE) counterpart, Battery Electric Vehicles (BEV) produce zero tailpipe emission which greatly reducing carbon footprints. Induction motor has been widely used and its control technology has evolved from scalar type volt/hertz to recent predictive control technology. This allows induction motor's application to expand from being the workhorse of industry to become prime mover in electric vehicle, where high performance is expected. Among vector control scheme, Direct Torque Control (DTC) has gained interest over Field Oriented Control (FOC) with simpler structure, better robustness and dynamics performance yet suffer from high torque and flux ripple. In electric vehicle applications, high ripple at low speed is highly undesirable, potentially causing torsional vibration. High performance control requires speed sensor integration, which often increase complexity in the design. The work aims to review the best control technology for induction motor in electric vehicle application through performance parameter evaluation such as improvement on dynamic response, torque and flux ripple reduction, and component optimization. Several arise issues in motor control and possible methods to circumvent are highlighted in this work. In conclusion, model predictive torque control (MPTC) is the most promising scheme for electric vehicle with excellent dynamic response, good low speed performance, and 50% torque ripple reduction compared to conventional DTC and potential integration with sliding mode observer for sensorless solution.
      3  2
  • Publication
    Feature extraction for underground object reconstruction from Ground Penetrating Radar (GPR) data
    ( 2022)
    Shazmin Aniza Abdul Shukor
    ;
    Havenderpal Singh
    ;
    Nurush Syamimie Mahmud
    ;
    H. Ali
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    T.S. Tengku Amran
    ;
    M.R. Ahmad
    Ground Penetrating Radar (GPR) is very beneficial for underground object scanning and detection. It utilises radar pulses as the signal, hence it able to penetrate surfaces in obtaining the underneath information without disturbing and destructing the ground. However, its radargram output in hyperbolic signal are very challenging to be analysed. Thus, suitable algorithm has to be designed and developed to interpret the data. This work highlights on the usage of drop-flow algorithm in detecting important features of the hyperbolic signal. Previous study has shown that these features is promising in understanding and further, reconstructing the GPR data. Results show that the features extracted from the hyperbolic signal able to be identified for further processing, which is necessary for visualization purpose.
      1  10