Wan Mohd Khairy Adly Wan Zaimi
Thumbnail Image
Preferred name
Wan Mohd Khairy Adly Wan Zaimi
Official Name
Wan Mohd Khairy Adly, Wan Zaimi
Alternative Name
Wan Mohd Khairy Adly, Wan Zaimi
Zaimi, Wan Mohd Khairy Adly Wan
Zaimi, Khairy
Main Affiliation
Scopus Author ID
55252803400
Researcher ID
AAS-2819-2020

Research Output

Filters

1
11
26
Reset filters

Settings
Now showing 1 - 10 of 26
  • Publication
    Two-Dimensional Mixed Convection and Radiative Al2O3-Cu/H2O Hybrid Nanofluid Flow over a Vertical Exponentially Shrinking Sheet with Partial Slip Conditions
    ( 2022-03-01)
    Asghar A.
    ;
    Ying T.Y.
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    Hybrid nanofluid is considered a modern and improvised form of nanofluid which usually used to enhance the performance of heat transfer in fluid flow systems. Previous studies found hybrid nanofluid offered a wide range of applications and this opened up numerous new opportunities to further explore the unknown behaviour of hybrid nanofluid under different body geometries and physical parameters. This paper numerically studied a two-dimensional mixed convection and radiative Al2O3-Cu/H2O hybrid nanofluid flow over a vertical exponentially shrinking sheet with partial slip conditions. The main objective is to investigate the effect of mixed convection and radiation on the velocity and temperature profiles, as well as the effect of suction on reduced skin friction and reduced heat transfer with respect to solid volume fraction of copper, velocity, and thermal slips. Exponential similarity variables transformed the governing system of partial differential equations into a system of ordinary differential equations which is solved via MATLAB’s bvp4c solver. Outcomes showed that the value of the reduced heat transfer upsurges in the first solution but declines in the second solution when the velocity slip rises. The reduced heat transfer decreases in both dual solutions when thermal slip is enhanced. As the intensity of thermal slip increases, the reduced skin friction rises in the first solution and decreases in the second. As the mixed convection parameter increases, no obvious variation is noticed in the temperature distribution within the first solution, but increasing trend is observed within the second solution. An increment in the temperature distribution also observed within the dual solutions as the thermal radiation parameter increases. In summary, findings from this study are particularly useful to understand various behaviour of Al2O3-Cu/H2O hybrid nanofluid under the influence of mixed convection, radiation, and partial slip conditions when it flows over a vertical exponential shrinking sheet.
  • Publication
    Mhd mixed convection flow and heat transfer of a dual stratified micropolar fluid over a vertical stretching/ shrinking sheet with suction, chemical reaction and heat source
    ( 2020-01-01)
    Khan A.A.
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    ;
    Sufahani S.F.
    ;
    Ferdows M.
    The purpose of this study was to investigate the magnetohydrodynamic (MHD) mixed convection flow and heat transfer of a dual stratified micropolar fluid over a vertical permeable stretching/ shrinking sheet with chemical reaction and heat source. The governing nonlinear partial differential equations are reduced into a system of nonlinear ordinary differential equations using an appropriate similarity transformation. Then, the obtained ordinary differential equations are solved numerically using the boundary value problem solver (bvp4c) in MATLAB software. The numerical results are tabulated and plotted for the heat transfer characteristics, namely, the skin friction coefficient, the local Nusselt number, the local Sherwood number as well as the velocity, temperature and concentration profiles for some values of the governing parameters. The present numerical results also have been compared with the previous reported results for a particular case and the comparisons are found to be in an excellent agreement. The results indicate that the skin friction coefficient and the local Nusselt number increase with chemical reaction and heat source. The magnitude of the local Sherwood number increases with the increasing of chemical reaction parameter. However, the magnitude of the local Sherwood number decreases with heat source effect.
  • Publication
    Stability analysis and dual solutions of time-dependent stagnation-point heat transport of Casson nanofluid by using Tiwari–Das model
    ( 2023-01-01)
    Lanjwani H.B.
    ;
    Anwar M.I.
    ;
    Ghoto A.A.
    ;
    Shehzad S.A.
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    Magnetohydrodynamic (MHD) time-dependent stagnation point flow and heat transfer characteristics of Casson base nanofluid over porous shrinking/stretching sheet with velocity slip and radiations effects is considered. The Tiwari–Das model is incorporated with silver (Ag), gold (Au), and iron (Fe) nanoparticles. The similarity variables are used to transfer the modeled partial differential equations into the system of ordinary differential equations. The shooting technique through Maple software is used to check the effects of different physical parameters used in equations and boundary conditions. The stability analysis at different values of the used parameters is performed due to existence of duality in the solutions. In the results, the second solution is found unstable while first one is physically reliable and stable. Numerically achieved findings of this problems show the skin friction coefficient is decreasing for (Formula presented.) and increasing for (Formula presented.) when the suction rate and nanoparticles volume-fraction are increased. The local Nusselt number is higher against the rising suction parameter and lower for the incremented nanoparticles volume fractions for both cases of (Formula presented.) Comparatively, the thermal conductivity and drag force of Au-nanoparticles is seen greater than Ag and Fe, while Fe greater than Ag in Casson nanofluid flow. The velocity profiles decrease with increase in nanoparticles volume fractions, Casson, suction and velocity slip parameters, while, an increase in unsteady parameter increases velocity profile. Moreover, radiation, nanoparticles volume fractions and magnetic parameters increase the temperature profiles.
  • Publication
    Effects of Solar Radiation and Viscous Dissipation on Mixed Convective Non-Isothermal Hybrid Nanofluid over Moving Thin Needle
    ( 2021-03-01)
    Jahan S.
    ;
    Ferdows M.
    ;
    Shamshuddin M.D.
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    The article is to examine the simulations influence of exponential solar radiation and dissipative transport of steady mixed convective hybrid nanofluid flow regime for an incompressible fluid in the boundary layer limit past a non-isothermal moving thin needle. We solved the system of ordinary differential equations obtained by choosing appropriate non-dimensional variables using the MAPLE software scheme. We have discussed the flow behaviours and all physical quantities of interest like skin friction cofactor, rate of heat transfer and rate of mass transfer as a function of similarity variables and governing parameters. Our numerically calculated solutions are given with similar studies. For instance, the entrance of several parameters like mixed convection, Power Law constant, buoyancy ratio parameter, Eckert number are illustrated graphically on velocity, temperature and nanoparticle concentration profiles. We observed that, the rate of heat transfer is higher in all cases but the reduction of mass transfer rate has been noticed.
  • Publication
    Nanofluid stagnation-point flow using Tiwari and Das model over a stretching/shrinking sheet with suction and slip effects
    ( 2020-01-01)
    Yashkun, Ubaidullah
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    ;
    Nor Ashikin Abu Bakar
    ;
    Ferdows M.
    In this paper, we considered the stagnation point flow and heat transfer of nanofluid over the stretching/shrinking surface by utilizing of Tiwari and Das nanofluid model. Additionally, the impact of suction and the first order slip likewise have been taken into the account. The system of governing partial differential equations (PDEs) is changed into the system of non-linear ordinary differential equations (ODEs) by means of similarity transformation. The resultant ODEs are solved by using BVP solver (bvp4c) in MATLAB software. The impact of some physical parameters, for example the suction parameter and the slip parameter on the skin friction coefficients and the local Nusselt number as well as the temperature and velocity profiles have been investigated, tabulated and graphically presented. These profiles and variations demonstrate that there exist dual solutions for a specific range of the stretching/shrinking parameter. Both suction and slip effects has enhance the local Nusselt number which represent heat transfer rate at the surface. It is also found that inclusion of both suction and slip effects expands the range of the dual solutions exist. The existence of the dual solutions only occurs in in the shrinking region. The flow separation in the boundary layer delay due to suction and slip effects imposed in the boundary condition.
  • Publication
    Magnetohydrodynamic Stagnation-point Flow towards a Permeable Stretching/Shrinking Sheet with Slip and Heat Generation/Absorption Effects
    (Universiti Malaysia Perlis, 2023-11-10)
    Fatinnabila Kamal
    ;
    Ahmad Ashraf Abdul Halim
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    This study of the magnetohydrodynamic (MHD) stagnation-point flow towards a permeable stretching/shrinking sheet in the presence of slip and heat generation/absorption effects is considered. The governing equations in the form of partial differential equations are transformed into a system of ordinary differential equations by using similarity transformation, and then solved numerically using bvp4c function in Matlab software. The variations of the numerical solutions for the skin friction coefficient and the local Nusselt number as well as velocity and temperature profiles are obtained for several values of the governing parameters. It is found that the solution is unique for the stretching case whereas dual (first and second) solutions exist for the shrinking case in certain range of parameters.
  • Publication
    MHD Stagnation-point flow towards a permeable shrinking/stretching sheet in a porous medium with velocity slip and heat generation/absorption effects
    (Semarak Ilmu Publishing, 2025)
    Hisyam Juwaidi Aziz
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    ;
    Fatinnabila Kamal
    ;
    Adnan Asghar
    ;
    Suliadi Firdaus Sufahani
    ;
    Liaquat Ali Lund
    ;
    Ubaidullah Yashkun
    ;
    Mohammad Ferdows
    The analysis of velocity slip and heat generation/absorption in fluid flow problems is crucial due to their significant impact on fluid behavior and heat transfer characteristics. The findings are vital for understanding and optimizing flow and heat transfer in industrial processes involving shrinking/stretching surfaces. Thus, this study aims to examine dual solutions of MHD stagnation-point flow over a stretching/shrinking sheet with suction/injection, velocity slip, and heat generation/absorption effects. The governing nonlinear partial differential equations are transformed into nonlinear ordinary differential equations using a similarity transformation and solved numerically using the boundary value problem solver bvp4c, a built-in MATLAB software. Dual solutions are found for the shrinking case, while the stretching case yields a unique solution. Increasing suction and slip parameters broadens the range of dual solutions. Results show that suction enhances the skin friction coefficient and heat transfer, whereas velocity slip reduces skin friction but increases heat transfer. Heat generation lowers the local Nusselt number. It is observed that the first solution is stable, while the second is unstable.
  • Publication
    Computational study of magnetite-ethylene glycol–water-based hybrid nanofluid dynamics on an exponential shrinking/stretching Riga surface under radiative heat flux
    (Springer, 2024-10)
    Ubaidullah Yashkun
    ;
    Liaquat Ali Lund
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    ;
    Zahir Shah
    ;
    Mansoor H. Alshehri
    ;
    Narcisa Vrinceanu
    ;
    Elisabeta Antonescu
    The exceptional heat transfer capabilities of hybrid base ferrofluids have attracted numerous researchers, prompting an increase in investigations into these working fluids. In various applications, hybrid base nanofluids have demonstrated superior heat transfer performance. However, further research is needed to expand their range of applications. To address this need, the current study aims to explore the flow of a hybrid base nanofluid (magnetite with ethylene glycol and water as the base fluid) on an exponential shrinking/stretching Riga plate with radiative heat flux. The Riga plate, an electromagnetic actuator, consists of a spanwise-aligned array of alternating electrodes attached to a flat surface and permanent magnets. This setup enables the examination of heat transfer with Hartmann number, thermal radiation, and nanoparticle volume fraction. The governing PDE systems are transformed into ODE systems using similarity transformations, and the developed model is solved numerically using the bvp4c technique in MATLAB software. A comprehensive convergence analysis and comparative investigation of numerical data are conducted to ensure the accuracy of the results. Finally, the effects of physical parameters on skin frictional force, Nusselt number, velocity field, and temperature field are investigated, and the results are presented graphically and discussed in detail. The numerical values for the skin frictional quantity variation along suction with different Hartmann quantity obtained. The critical values Sci,i=1,2, and 3 observed are 2.2396,2.3795, and 2.7714 corresponding to the values of M = 0,0.02, and 0.04, respectively. Research suggests that dual solutions are present within a specific spectrum of suction and stretching/shrinking parameters. Additionally, the stability analysis of these dual solutions indicates that the primary solution is stable.
  • Publication
    Hybrid nanofluid flow through an exponentially stretching/shrinking sheet with mixed convection and Joule heating
    ( 2020-01-01)
    Yashkun U.
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    ;
    Ishak A.
    ;
    Pop I.
    ;
    Sidaoui R.
    Purpose: This study aims to investigate the flow and heat transfer of a hybrid nanofluid through an exponentially stretching/shrinking sheet along with mixed convection and Joule heating. The nanoparticles alumina (Al2O3) and copper (Cu) are suspended into a base fluid (water) to form a new kind of hybrid nanofluid (Al2O3-Cu/water). Also, the effects of constant mixed convection parameter and Joule heating are considered. Design/methodology/approach: The governing partial differential equations are transformed into ordinary differential equations (ODEs) using appropriate similarity transformations. The transformed nonlinear ODEs are solves using the bvp4c solver available in MATLAB software. A comparison of the present results shows a good agreement with the published results. Findings: Dual solutions for hybrid nanofluid flow obtained for a specific range of the stretching/shrinking parameter values. The values of the skin friction coefficient increases but the local Nusselt number decreases for the first solution with the increasing of the magnetic parameter. Enhancing copper volume fraction and Eckert number reduces the surface temperature, which intimates the decrement of heat transfer rate for the first and second solutions for the stretching/shrinking sheet. In detail, the first solution results show that when the Eckert number increases as 0.1, 0.4 and 0.7 at λ = 1.5, the temperature variations reduced to 10.686840, 10.671419 and 10.655996. While in the second solution, keeping the same parameters temperature variation reduced to 9.750777, 9.557349 and 9.364489, respectively. On the other hand, the results indicate that the skin friction coefficient increases with copper volume fraction. This study shows that the thermal boundary layer thickness rises due to the rise in the solid volume fraction. It is also observed that the magnetic parameter, copper volume fraction and Eckert number widen the range of the stretching/shrinking parameter for which the solution exists. Practical implications: In practice, the investigation on the flow and heat transfer of a hybrid nanofluid past an exponentially stretching/shrinking sheet with mixed convection and Joule heating is crucial and useful. The problems related to hybrid nanofluid have numerous real-life and industrial applications, such as microelectronics, manufacturing, naval structures, nuclear system cooling, biomedical and drug reduction. Originality/value: In specific, this study focuses on increasing thermal conductivity using a hybrid nanofluid mathematical model. The novelty of this study is the use of natural mixed convection and Joule heating in a hybrid nanofluid. This paper can obtain dual solutions. The authors declare that this study is new, and there is no previous published work similar to the present study.
      4  3
  • Publication
    Unsteady three-dimensional free convection flow near the stagnation point over a general curved isothermal surface in a nanofluid
    ( 2020-01-01)
    Norshaza Atika Saidin
    ;
    Admon M.A.
    ;
    Wan Mohd Khairy Adly Wan Zaimi
    This study deals with an unsteady three-dimensional free convection flow near the stagnation point region over a general curved isothermal surface placed in a nanofluid. Nanofluids are great scientific interest because these new thermal transport phenomena surpass the fundamental limits of conventional macroscopic theories of suspensions. Since the heat and mass transfer are very extensive in the industry, the unsteady three-dimensional body near stagnation point can give a significant impact on the heat transfer process. The main objective of the present study is to investigate the effects of some governing parameters on the skin friction coefficients, local Nusselt and local sheerwood numbers as well as related profiles of unsteady free convection in a nanofluid. The momentum equations in x-and y-directions, energy balance equation, and nanoparticle concentration equation are reduced to a set of four fully-coupled nonlinear differential equations under appropriate similarity transformations. The well-known technique Keller-box method is used numerically for different values of governing parameters entering these equations. Further, the present results have been compared with the previous published results for a particular case and the comparisons are found to be in good agreement. The skin friction, local Nusselt number and Sherwood number is increases with an increase in curvature parameter. Rising values of the Lewis number and Brownian motion parameter has enhanced the flow while rising values of the buoyancy and thermophoresis parameter will decelerate the flow. The temperature profile is increases when Brownian motion, buoyancy and thermophoresis parameter increases and concentration profile increase with an increases in buoyancy and thermophoresis parameter.
      11  26