Rafiza Abd Razak
Thumbnail Image
Preferred name
Rafiza Abd Razak
Official Name
Rafiza, Abd Razak
Alternative Name
Rafiza, Abd Razak
Rafiza, Abdul Razak
Abdul Razak, Rafiza
Rafiza, R. A.
Razak, Rafiza Abd
Rafiza, A. R.
Abdul Razak, R.
Razak, R. A.
Razak, Rafiza Abdul
Razak, A. R.
Abd Razak, R.
Main Affiliation
Scopus Author ID
51161919900
Researcher ID
AAL-1501-2020

Research Output

Filters

2
2
2
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    Optimization of NaOH Molarity, LUSI Mud/Alkaline Activator, and Na2SiO3/NaOH Ratio to produce lightweight aggregate-based geopolymer
    ( 2015)
    Rafiza Razak
    ;
    Mohd Abdullah
    ;
    Kamarudin Hussin
    ;
    Khairul Ismail
    ;
    Djwantoro Hardjito
    ;
    Zarina Yahya
    This paper presents the mechanical function and characterization of an artificial lightweight geopolymer aggregate (ALGA) using LUSI (Sidoarjo mud) and alkaline activator as source materials. LUSI stands for LU-Lumpur and SI-Sidoarjo, meaning mud from Sidoarjo which erupted near the Banjarpanji-1 exploration well in Sidoarjo, East Java, Indonesia on 27 May 2006. The effect of NaOH molarity, LUSI mud/Alkaline activator (LM/AA) ratio, and Na2SiO3/NaOH ratio to the ALGA are investigated at a sintering temperature of 950 °C. The results show that the optimum NaOH molarity found in this study is 12 M due to the highest strength (lowest AIV value) of 15.79% with lower water absorption and specific gravity. The optimum LUSI mud/Alkaline activator (LM/AA) ratio of 1.7 and the Na2SiO3/NaOH ratio of 0.4 gives the highest strength with AIV value of 15.42% with specific gravity of 1.10 g/cm3 and water absorption of 4.7%. The major synthesized crystalline phases were identified as sodalite, quartz and albite. Scanning Electron Microscope (SEM) image showed more complete geopolymer matrix which contributes to highest strength of ALGA produced.
      3  14
  • Publication
    Optimization of NaOH molarity, LUSI mud/alkaline activator, and Na₂SiO₃/NaOH ratio to produce lightweight aggregate-based geopolymer
    ( 2015)
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Djwantoro Hardjito
    ;
    Kamarudin Hussin
    ;
    Khairul Azwan Ismail
    ;
    Zarina Yahya
    This paper presents the mechanical function and characterization of an artificial lightweight geopolymer aggregate (ALGA) using LUSI (Sidoarjo mud) and alkaline activator as source materials. LUSI stands for LU-Lumpur and SI-Sidoarjo, meaning mud from Sidoarjo which erupted near the Banjarpanji-1 exploration well in Sidoarjo, East Java, Indonesia on 27 May 2006. The effect of NaOH molarity, LUSI mud/Alkaline activator (LM/AA) ratio, and Na₂SiO₃/NaOH ratio to the ALGA are investigated at a sintering temperature of 950 °C. The results show that the optimum NaOH molarity found in this study is 12 M due to the highest strength (lowest AIV value) of 15.79% with lower water absorption and specific gravity. The optimum LUSI mud/Alkaline activator (LM/AA) ratio of 1.7 and the Na2SiO3/NaOH ratio of 0.4 gives the highest strength with AIV value of 15.42% with specific gravity of 1.10 g/cm3 and water absorption of 4.7%. The major synthesized crystalline phases were identified as sodalite, quartz and albite. Scanning Electron Microscope (SEM) image showed more complete geopolymer matrix which contributes to highest strength of ALGA produced.
      1  15