Rafiza Abd Razak
Thumbnail Image
Preferred name
Rafiza Abd Razak
Official Name
Rafiza, Abd Razak
Alternative Name
Rafiza, Abd Razak
Rafiza, Abdul Razak
Abdul Razak, Rafiza
Rafiza, R. A.
Razak, Rafiza Abd
Rafiza, A. R.
Abdul Razak, R.
Razak, R. A.
Razak, Rafiza Abdul
Razak, A. R.
Abd Razak, R.
Main Affiliation
Scopus Author ID
51161919900
Researcher ID
AAL-1501-2020

Research Output
Now showing 1 - 2 of 2
  • Publication
    Artificial lightweight aggregates made from pozzolanic material: A review on the method, physical and mechanical properties, thermal and microstructure
    ( 2022)
    Dickson Ling Chuan Hao
    ;
    Rafiza Abd Razak
    ;
    Marwan Kheimi
    ;
    Zarina Yahya
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Dumitru Doru Burduhos Nergis
    ;
    Hamzah Fansuri
    ;
    Ratna Ediati
    ;
    Rosnita Mohamed
    ;
    Alida Abdullah
    As the demand for nonrenewable natural resources, such as aggregate, is increasing worldwide, new production of artificial aggregate should be developed. Artificial lightweight aggregate can bring advantages to the construction field due to its lower density, thus reducing the dead load applied to the structural elements. In addition, application of artificial lightweight aggregate in lightweight concrete will produce lower thermal conductivity. However, the production of artificial lightweight aggregate is still limited. Production of artificial lightweight aggregate incorporating waste materials or pozzolanic materials is advantageous and beneficial in terms of being environmentally friendly, as well as lowering carbon dioxide emissions. Moreover, additives, such as geopolymer, have been introduced as one of the alternative construction materials that have been proven to have excellent properties. Thus, this paper will review the production of artificial lightweight aggregate through various methods, including sintering, cold bonding, and autoclaving. The significant properties of artificial lightweight aggregate, including physical and mechanical properties, such as water absorption, crushing strength, and impact value, are reviewed. The properties of concrete, including thermal properties, that utilized artificial lightweight aggregate were also briefly reviewed to highlight the advantages of artificial lightweight aggregate.
  • Publication
    Optimization of NaOH molarity, LUSI mud/alkaline activator, and Na₂SiO₃/NaOH ratio to produce lightweight aggregate-based geopolymer
    ( 2015)
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Djwantoro Hardjito
    ;
    Kamarudin Hussin
    ;
    Khairul Azwan Ismail
    ;
    Zarina Yahya
    This paper presents the mechanical function and characterization of an artificial lightweight geopolymer aggregate (ALGA) using LUSI (Sidoarjo mud) and alkaline activator as source materials. LUSI stands for LU-Lumpur and SI-Sidoarjo, meaning mud from Sidoarjo which erupted near the Banjarpanji-1 exploration well in Sidoarjo, East Java, Indonesia on 27 May 2006. The effect of NaOH molarity, LUSI mud/Alkaline activator (LM/AA) ratio, and Na₂SiO₃/NaOH ratio to the ALGA are investigated at a sintering temperature of 950 °C. The results show that the optimum NaOH molarity found in this study is 12 M due to the highest strength (lowest AIV value) of 15.79% with lower water absorption and specific gravity. The optimum LUSI mud/Alkaline activator (LM/AA) ratio of 1.7 and the Na2SiO3/NaOH ratio of 0.4 gives the highest strength with AIV value of 15.42% with specific gravity of 1.10 g/cm3 and water absorption of 4.7%. The major synthesized crystalline phases were identified as sodalite, quartz and albite. Scanning Electron Microscope (SEM) image showed more complete geopolymer matrix which contributes to highest strength of ALGA produced.
      1  15