Latifah Mohamed
Thumbnail Image
Preferred name
Latifah Mohamed
Official Name
Mohamed , Latifah
Alternative Name
Mohamed, Latifah
Mohamed, L.
Main Affiliation
Scopus Author ID
16943523200
Researcher ID
IAK-5403-2023

Research Output

Filters

17
Reset filters

Settings
Now showing 1 - 10 of 17
  • Publication
    Relative Localization Method of Wet Spot of Grain using Array of Passive RFID Tags
    ( 2021-12-01)
    Azmi N.
    ;
    Latifah Munirah Kamarudin
    ;
    Latifah Mohamed
    ;
    Ammar Zakaria
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Syed Muhammad Mamduh Syed Zakaria
    ;
    Ndzi D.L.
    Radio Frequency Identification (RFID) enables a large number of object monitoring since semi/passive tags are independent of batteries. In our previous work, the possibility of using different wireless technologies such as Wireless Sensor Network (WSN), Wireless Local Area Network (WLAN) and Radio Frequency Identification (RFID) to determine the moisture content in rice was investigated. Finding from our previous work suggest that RFID can be used to determine the moisture content of rice. While numerous research have been conducted for moisture content of grain, however, to author's knowledge, there is only a few studies conducted on the localization of grain hostpot. Therefore, this study aims to investigate if the passive RFID array can be used to localize the location of the wet spot of grain. Prior, the experiment, a suitable setting for the RFID system were determined. In addition, a simple test was conducted to select a suitable operating frequency. From the investigation, the result indicates that only frequency channels 865, 866, 867, 868 and 869 MHz can detect all 30 tags. Meanwhile, frequency channel in the range 902 to 928 MHz detects 26 to 29 unique tags. Hence, 868 MHz was selected as the operating frequency throughout the experiment. The findings indicate that the RSSI value measured by the RFID reader decreased as the moisture of the sample increased when the tags were blocked by the sample placed at the designated location during the test.
      1
  • Publication
    Rice Grain Moisture Sensing Based on UHF RFID Tag
    ( 2022-06-24)
    Ainaa Syamim Mohd Radzi
    ;
    Latifah Munirah Kamarudin
    ;
    Latifah Mohamed
    ;
    Ammar Zakaria
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Syed Muhammad Mamduh Syed Zakaria
    ;
    Ndzi D.L.
    One of the critical steps in the post-production of paddy rice is to be stored in conditions that need to be controlled, especially the moisture content (MC) of the grains. The ability to determine and control moisture is a very important aspect of maintaining grain quality. This study aims to detect the MC of rice grain using UHF RFID technology. In this paper, three experiments have been carried out to detect the MC of rice in full rice grain-filled containers involving two conditions: with metal and without metal containers. The samples used consist of four 2 kg bags with MC levels of 11.875%, 16%, 20%, and 24%. The Received Signal Strength Indicator (RSSI) values were measured using a UHF handheld reader with two RFID tags to predict the MC. The results show an increasing RSSI pattern as the MC increases.
      3
  • Publication
    A new method of rice moisture content determination using voxel weighting-based from radio tomography images
    ( 2021)
    Nurul Amira Mohd Ramli
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Latifah Munirah Kamarudin
    ;
    Latifah Mohamed
    ;
    Ammar Zakaria
    ;
    Anita Ahmad
    ;
    Ruzairi Abdul Rahim
    This manuscript presents a new method to monitor and localize the moisture distribution in a rice silo based on tomography images. Because the rice grain is naturally hygroscopic, the stored grains’ quality depends on their level of moisture content. Higher moisture content leads to fibre degradation, making the grains too frail and possibly milled. If the moisture is too low, the grains become brittle and are susceptible to higher breakage. At present, the single-point measurement method is unreliable because the moisture build-up inside the silo might be distributed unevenly. In addition, this method mostly applies gravimetric analysis, which is destructive. Thus, we proposed a radio tomographic imaging (RTI) system to address these problems. Four simulated phantom profiles at different percentages of moisture content were reconstructed using Newton’s One-Step Error Reconstruction and Tikhonov Regularization algorithms. This simulation study utilized the relationship between the maximum voxel weighting of the reconstructed RTI image and the percentage of moisture content. The outcomes demonstrated promising results, in which the weighting voxel linearly increased with the percentage of moisture content, with a correlation coefficient higher than 0.95 was obtained. Therefore, the results support the possibility of using the RTI approach for monitoring and localizing the moisture distribution inside the rice silo.
      4  6
  • Publication
    RF-Based moisture content determination in rice using machine learning techniques
    ( 2021)
    Noraini Azmi
    ;
    Latifah Munirah Kamarudin
    ;
    Ammar Zakaria
    ;
    David Lorater Ndzi
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Syed Muhammad Mamduh Syed Zakaria
    ;
    Latifah Mohamed
    Seasonal crops require reliable storage conditions to protect the yield once harvested. For long term storage, controlling the moisture content level in grains is challenging because existing moisture measuring techniques are time-consuming and laborious as measurements are carried out manually. The measurements are carried out using a sample and moisture may be unevenly distributed inside the silo/bin. Numerous studies have been conducted to measure the moisture content in grains utilising dielectric properties. To the best of authors’ knowledge, the utilisation of low-cost wireless technology operating in the 2.4 GHz and 915 MHz ISM bands such as Wireless Sensor Network (WSN) and Radio Frequency Identification (RFID) have not been widely investigated. This study focuses on the characterisation of 2.4 GHz Radio Frequency (RF) transceivers using ZigBee Standard and 868 to 915 MHz UHF RFID transceiver for moisture content classification and prediction using Artificial Neural Network (ANN) models. The Received Signal Strength Indicator (RSSI) from the wireless transceivers is used for moisture content prediction in rice. Four samples (2 kg of rice each) were conditioned to 10%, 15%, 20%, and 25% moisture contents. The RSSI from both systems were obtained and processed. The processed data is used as input to different ANNs models such as Support Vector Machine (SVM), K-Nearest Neighbour (KNN), Random Forest, and Multi-layer Perceptron (MLP). The results show that the Random Forest method with one input feature (RSSI_WSN) provides the highest accuracy of 87% compared to the other four models. All models show more than 98% accuracy when two input features (RSSI_WSN and RSSI_TAG2) are used. Hence, Random Forest is a reliable model that can be used to predict the moisture content level in rice as it gives a high accuracy even when only one input feature is used.
      6  10
  • Publication
    Rf-based moisture content determination in rice using machine learning techniques
    ( 2021-03-01)
    Azmi N.
    ;
    Latifah Munirah Kamarudin
    ;
    Ammar Zakaria
    ;
    Ndzi D.L.
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Syed Muhammad Mamduh Syed Zakaria
    ;
    Latifah Mohamed
    Seasonal crops require reliable storage conditions to protect the yield once harvested. For long term storage, controlling the moisture content level in grains is challenging because existing moisture measuring techniques are time-consuming and laborious as measurements are carried out manually. The measurements are carried out using a sample and moisture may be unevenly distributed inside the silo/bin. Numerous studies have been conducted to measure the moisture content in grains utilising dielectric properties. To the best of authors’ knowledge, the utilisation of low-cost wireless technology operating in the 2.4 GHz and 915 MHz ISM bands such as Wireless Sensor Network (WSN) and Radio Frequency Identification (RFID) have not been widely investigated. This study focuses on the characterisation of 2.4 GHz Radio Frequency (RF) transceivers using ZigBee Standard and 868 to 915 MHz UHF RFID transceiver for moisture content classification and prediction using Artificial Neural Network (ANN) models. The Received Signal Strength Indicator (RSSI) from the wireless transceivers is used for moisture content prediction in rice. Four samples (2 kg of rice each) were conditioned to 10%, 15%, 20%, and 25% moisture contents. The RSSI from both systems were obtained and processed. The processed data is used as input to different ANNs models such as Support Vector Machine (SVM), K-Nearest Neighbour (KNN), Random Forest, and Multi-layer Perceptron (MLP). The results show that the Random Forest method with one input feature (RSSI_WSN) provides the highest accuracy of 87% compared to the other four models. All models show more than 98% accuracy when two input features (RSSI_WSN and RSSI_TAG2) are used. Hence, Random Forest is a reliable model that can be used to predict the moisture content level in rice as it gives a high accuracy even when only one input feature is used.
      1
  • Publication
    Simulation of Radio Tomographic Imaging for Measurement Rice Moisture Content
    ( 2020-08-01)
    Mohammed Saeed Moqbel Abdullah
    ;
    Latifah Munirah Kamarudin
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Latifah Mohamed
    ;
    Ammar Zakaria
    Radio Tomographic Imaging (RTI) is an emerging technology for imaging the attenuation caused by physical objects in wireless networks that perform wireless receive signal strength (RSS) measurements obtain a reconstruction of objects inside an area of interest to know the different moisture content of rice in the silo. The simulation results analysis has been performed. The image of the phantoms was reconstructed by the selected image reconstruction algorithms, which are Linear Back Projection (LBP), Filtered Back Projection (FBP), and Gaussian. Evaluation of this work was assessed by using three image quality assessment techniques Mean Structural Similarity Index (MSSIM). MSSIM was used to analyze the reconstructed images. Among the three proposed images reconstruction algorithms linear back projection, filtered back projection, and Gaussian algorithm. Gaussian seems to be a more reliable option for reconstructing the image of moisture content of rice in a silo by using 20 RF nodes in the RTI system. This paper discusses in detail the use of shadowing losses on links between RF sensors in a wireless community to image the attenuation of moisture content inside the wi-fi network vicinity.
      1
  • Publication
    Measurement of rice moisture content based on quantitative analysis from radio tomography images
    ( 2024-05-01)
    Nurul Amira Mohd Ramli
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Ruslinda A. Rahim
    ;
    Latifah Munirah Kamarudin
    ;
    Latifah Mohamed
    ;
    Moqbel Abdullah M.S.
    ;
    Ammar Zakaria
    Inefficient storage of paddy and rice grains can lead to grain deterioration, resulting in post-harvest losses ranging from 10% to 30%. The quality of grains cannot be improved throughout the storage period. Therefore, following the mechanisation of agricultural industries, air dryers have been developed to control the crops’ moisture level by blowing ambient or heated air into the silo to improve the aeration and allow the grains to be preserved with minimal loss of quality until the appropriate time for managing and marketing processes. However, the conventional sampling method used to measure the moisture level is inefficient because it is very localised and only represents part of the moisture distribution inside the bulk grains. Additionally, incorporating advanced technologies can be a significant cost limitation for small-scale industries. Thus, to address the issue, this research study developed a radio tomographic imaging (RTI) system in a silo-scale prototype using 20 sensor nodes operating at 2.4 GHz to localise and monitor the moisture level constructively. The RTI system reconstructs the cross-sectional images across the rice silo by measuring radio frequency attenuation, in terms of received signal strength (RSS) quality, caused by the rice moisture phantoms within the wireless sensor network (WSN) area. A total of five phantoms’ profiles having a percentage of moisture content (MC)of 15%, 20% and 25% were reconstructed using four image reconstruction algorithms,Linear Back Projection (LBP), Filtered Back Projection (FBP), Newton’s One-step ErrorReconstruction (NOSER) and Tikhonov Regularisation. Then, an image quality assessment,Mean Structural Similarity Index (MSSIM), was utilised to evaluate the performance of thereconstructed images. Lastly, a numerical method based on the first-order linear regressionmodel was introduced as a preliminary approach toward the method’s establishment. In summary, the experimental results demonstrated average image quality scores for all MClevels (15%, 20% and 25%), where the range scores are 0.2776 – 0.4755. Based on thenumerical analysis, the results support the possibility of engaging the proposed techniqueto monitor the moisture level inside a rice silo with the highest and lowest correlationcoefficients of 0.7218 and 0.5442, respectively.
  • Publication
    Rf-based moisture content determination in rice using machine learning techniques
    ( 2021-03-01)
    Azmi N.
    ;
    Latifah Munirah Kamarudin
    ;
    Ammar Zakaria
    ;
    Ndzi D.L.
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Syed Muhammad Mamduh Syed Zakaria
    ;
    Latifah Mohamed
    Seasonal crops require reliable storage conditions to protect the yield once harvested. For long term storage, controlling the moisture content level in grains is challenging because existing moisture measuring techniques are time-consuming and laborious as measurements are carried out manually. The measurements are carried out using a sample and moisture may be unevenly distributed inside the silo/bin. Numerous studies have been conducted to measure the moisture content in grains utilising dielectric properties. To the best of authors’ knowledge, the utilisation of low-cost wireless technology operating in the 2.4 GHz and 915 MHz ISM bands such as Wireless Sensor Network (WSN) and Radio Frequency Identification (RFID) have not been widely investigated. This study focuses on the characterisation of 2.4 GHz Radio Frequency (RF) transceivers using ZigBee Standard and 868 to 915 MHz UHF RFID transceiver for moisture content classification and prediction using Artificial Neural Network (ANN) models. The Received Signal Strength Indicator (RSSI) from the wireless transceivers is used for moisture content prediction in rice. Four samples (2 kg of rice each) were conditioned to 10%, 15%, 20%, and 25% moisture contents. The RSSI from both systems were obtained and processed. The processed data is used as input to different ANNs models such as Support Vector Machine (SVM), K-Nearest Neighbour (KNN), Random Forest, and Multi-layer Perceptron (MLP). The results show that the Random Forest method with one input feature (RSSI_WSN) provides the highest accuracy of 87% compared to the other four models. All models show more than 98% accuracy when two input features (RSSI_WSN and RSSI_TAG2) are used. Hence, Random Forest is a reliable model that can be used to predict the moisture content level in rice as it gives a high accuracy even when only one input feature is used.
  • Publication
    Rice Grain Moisture Sensing Based on UHF RFID Tag
    ( 2022-06-24)
    Radzi A.S.M.
    ;
    Latifah Munirah Kamarudin
    ;
    Latifah Mohamed
    ;
    Ammar Zakaria
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Syed Muhammad Mamduh Syed Zakaria
    ;
    Ndzi D.L.
    One of the critical steps in the post-production of paddy rice is to be stored in conditions that need to be controlled, especially the moisture content (MC) of the grains. The ability to determine and control moisture is a very important aspect of maintaining grain quality. This study aims to detect the MC of rice grain using UHF RFID technology. In this paper, three experiments have been carried out to detect the MC of rice in full rice grain-filled containers involving two conditions: with metal and without metal containers. The samples used consist of four 2 kg bags with MC levels of 11.875%, 16%, 20%, and 24%. The Received Signal Strength Indicator (RSSI) values were measured using a UHF handheld reader with two RFID tags to predict the MC. The results show an increasing RSSI pattern as the MC increases.
  • Publication
    A new method of rice moisture content determination using voxel weighting-based from radio tomography images
    ( 2021-06-01)
    Ramli N.A.M.
    ;
    Mohd Hafiz Fazalul Rahiman
    ;
    Latifah Munirah Kamarudin
    ;
    Latifah Mohamed
    ;
    Ammar Zakaria
    ;
    Anita Ahmad
    ;
    Rahim R.A.
    This manuscript presents a new method to monitor and localize the moisture distribution in a rice silo based on tomography images. Because the rice grain is naturally hygroscopic, the stored grains’ quality depends on their level of moisture content. Higher moisture content leads to fibre degradation, making the grains too frail and possibly milled. If the moisture is too low, the grains become brittle and are susceptible to higher breakage. At present, the single-point measurement method is unreliable because the moisture build-up inside the silo might be distributed unevenly. In addition, this method mostly applies gravimetric analysis, which is destructive. Thus, we proposed a radio tomographic imaging (RTI) system to address these problems. Four simulated phantom profiles at different percentages of moisture content were reconstructed using Newton’s One-Step Error Reconstruction and Tikhonov Regularization algorithms. This simulation study utilized the relationship between the maximum voxel weighting of the reconstructed RTI image and the percentage of moisture content. The outcomes demonstrated promising results, in which the weighting voxel linearly increased with the percentage of moisture content, with a correlation coefficient higher than 0.95 was obtained. Therefore, the results support the possibility of using the RTI approach for monitoring and localizing the moisture distribution inside the rice silo.