Ahmad Firdaus Ahmad Zaidi
Thumbnail Image
Preferred name
Ahmad Firdaus Ahmad Zaidi
Official Name
Ahmad Firdaus, Ahmad Zaidi
Alternative Name
Ahmad Zaidi, Ahmad Firdaus
Ahmad Firdaus, A. Z.
Zaidi, Ahmad Firdaus Bin Ahmad
Firdaus, A. Z.Ahmad
Main Affiliation
Scopus Author ID
55992689600
Researcher ID
S-8233-2019

Research Output

Filters

17
Reset filters

Settings
Now showing 1 - 10 of 17
  • Publication
    Investigating the Effect of EEG Channel Location on Emotion Classification using EEG Signal
    ( 2023-01-01)
    Mohd Shuhanaz Zanar Azalan
    ;
    Hisham N.A.W.N.N.
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Jusman Y.
    EEG channel location on emotion classification and the choice of classifier are the factor that significantly impact the emotion recognition accuracy. Currently, there is a gap in the literature concerning the identification of optimal channel locations and classifier choice for effective emotion recognition. This study aims to investigate the influence of EEG channel electrode locations and classifiers on the accuracy of emotion recognition. Emotion classification was conducted using three classifiers namely Neural Network (NN), Support Vector Machine (SVM), and K-Nearest Neighbor (KNN) - on two EEG channels configuration with 62 channels and 32 channels, as well as five separate brain regions: Frontal, Temporal, Central, Parietal, and Occipital. The analysis was performed on the SEED-IV dataset. Features were extracted using Differential Entropy. Result indicates that SVM outperformed NN and KNN across all configurations. When assessing EEG channel location, the 32-channel setup yield higher average accuracies for both SVM (91.07%) and NN (86.63%), whereas the 62-channel setup was optimal for KNN (88.28%). The most significant results were identified in the Parietal and Occipital regions. SVM achieved the highest accuracies in these regions (96.55% in the Parietal and 97.18% in the Occipital), with NN (90.17% in Parietal and 92.65% in Occipital) and KNN (82.76% in Parietal and 92.81% in Occipital). These findings emphasize the crucial roles of the Parietal and Occipital regions, associated with sensory integration and visual processing, in emotion recognition. The study highlights the importance of EEG channel location and classifier selection in enhancing the reliability of EEG-based emotion recognition systems.
  • Publication
    Classification Size of Underground Object from Ground Penetrating Radar Image using Machine Learning Technique
    ( 2023-01-01)
    Mohd Shuhanaz Zanar Azalan
    ;
    Esian T.
    ;
    Hasimah Ali
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Amran T.S.T.
    Ground Penetrating Radar (GPR) is a useful tool in detecting subsurface object or hidden structure defects However, the time-consuming problems and high requirement of professional manpower is required to analyse the GPR data. Machine learning is a tool that endowed with the ability to learn, and it can reduce time taken for the GPR data analysing. To simplify the identification process, a framework is proposed to classify the size of underground metallic pipe by using Histogram of Oriented Gradient (HOG) as a feature extraction algorithm. Two machine learning algorithms namely Support Vector Machines (SVM) and Backpropagation Neural Network were proposed to classify the size of the underground metallic pipe. As a result, the accuracy from the identification is more than 98% for both classifier algorithm.
  • Publication
    dSPACE Implementation of Motor Drives using Asymmetric Converter
    ( 2024-02-01)
    Ahmad Firdaus Ahmad Zaidi
    ;
    Azmi S.A.
    ;
    Hwai L.J.
    ;
    Kamarudin K.
    ;
    Hasimah Ali
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Noor A.M.
    ;
    Ramzan N.I.
    This paper deals with the dSPACE DS1104 based implementation of closed-loop motor drive system using asymmetric converter. The mathematical model of the drive has been simulated in the MATLAB/Simulink environment to analyze the performance of the drive system. The simulated results are then validated with the experimental investigation. For experimental work, the pulse width modulation (PWM) has been implemented in MATLAB environment with Simulink real-time interface. Meanwhile, the hardware implementation consisting of dSPACE digital signal processor, voltage source inverter and generator-coupled motor. Variable speed test was performed on the loaded motor in open loop and closed-loop design to obtain speed tracking response parameter as well as speed ripple. Overall performance of developed system is satisfactory where in low-speed operation, experimental results show good speed tracking performance with ripple within 20%.
  • Publication
    Effect of elevated temperature on the tensile strength of Napier/glass-epoxy hybrid reinforced composites
    ( 2017-11-07)
    Mohd Ridzuan Mohd Jamir
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Afendi Rojan
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Azduwin Khasri
    The effects of elevated temperature on the tensile strength of Napier/glass-epoxy hybrid reinforced composites and its morphology of fractured surfaces are discussed. Napier/glass-epoxy hybrid reinforced composites were fabricated by using vacuum infusion method by arranging Napier fibres in between sheets of woven glass fibres. Napier and glass fibres were laminated with estimated volume ratios were 24 and 6 vol. %, respectively. The epoxy resin was used as matrix estimated to 70 vol. %. Specimens were tested to failure under tension at a cross-head speed of 1 mm/min using Universal Testing Machine (Instron) with a load cell 100 kN at four different temperatures of RT, 40°C, 60°C and 80°C. The morphology of fractured surface of hybrid composites was investigated by field emission scanning electron microscopy. The result shows reduction in tensile strength at elevated temperatures. The increase in the temperature activates the process of diffusion, and generates critical stresses which cause the damage at first-ply or at the centre of the hybrid plate, as a result lower the tensile strength. The observation of FESEM images indicates that the fracture mode is of evolution of localized damage, from fibre/matrix debonding, matric cracking, delamination and fibre breakage.
  • Publication
    Ground penetrating radar for buried utilities detection and mapping: a review
    ( 2021-12-01)
    Hasimah Ali
    ;
    Ideris N.S.M.
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Amran T.S.T.
    ;
    Ahmad M.R.
    ;
    Rahim N.A.
    ;
    Shazmin Aniza Abdul Shukor
    This paper presents a review on Ground Penetrating Radar (GPR) detection and mapping of buried utilities which have been widely used as non-destructive investigation and efficiently in terms of usage. The reviews cover on experimental design in GPR data collection and survey, pre-processing, extracting hyperbolic feature using image processing and machine learning techniques. Some of the issues and challenges facing by the GPR interpretation particularly in extracting the hyperbolas pattern of underground utilities have also been highlighted.
  • Publication
    Tensile properties of interwoven hemp/PET (Polyethylene Terephthalate) epoxy hybrid composites
    ( 2017-10-29)
    Ahmad M.A.A.
    ;
    Mohd Shukry Abdul Majid
    ;
    Mohd Ridzuan Mohd Jamir
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Nasrul Amri Mohd Amin
    This paper describes the experimental investigation of the tensile properties of interwoven Hemp/PET hybrid composites. The effect of hybridization of hemp (warp) with PET fibres (weft) on tensile properties was of interest. Hemp and PET fibres were selected as the reinforcing material while epoxy resin was chosen as the matrix. The interwoven Hemp/PET fabric was used to produce hybrid composite using a vacuum infusion process. The tensile test was conducted using Universal Testing Machine in accordance to the ASTM D638. The tensile properties of the interwoven Hemp/PET hybrid composite were then compared with the neat woven hemp/epoxy composite. The results show that the strength of hemp/PET with the warp direction was increased by 8% compared to the neat woven hemp composite. This enhancement of tensile strength was due to the improved interlocking structure of interwoven Hemp/PET hybrid fabric.
  • Publication
    Reconstruction hyperbola signature of underground object using GPR images for mapping applications
    ( 2024-02-08)
    Masuan N.A.
    ;
    Hasimah Ali
    ;
    Amran T.S.T.
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Kamarudin K.
    ;
    Ahmad M.R.
    Ground penetrating radar has been acknowledged as an effective and efficient technique for non-destructive investigation for near-subsurface exploration that is based on the reflection receiver-transmitter of the antenna when hitting buried objects. An accurate interpretation of GPR data is greatly important in locating and mapping underground objects. Although GPR research has achieved remarkable success, the interpretation of GPR raw data highly depends on the reliance of user experts. Further, unexperienced GPR users are subject to error since the hyperbola signatures may resemble each other. Therefore, this work focuses on the development of a 3D reconstruction of the hyperbola signature of underground objects using GPR images for mapping applications. In this study, 3D reconstruction has been developed based on the Synthetic Aperture Focusing Technique, also known as SAFT. At the first stage, the raw input of GPR images was subjected to zero-time correction and background elimination. Next is the projection of each hyperbola signature by means of B-Scan images to create a 3D image. Then, the resultant 3D images were stacked together, and further 3D interpolation techniques were employed on the images. The experimental studies have been done on GPR data using a metal sphere as a sample. The findings of the study highlight that the SAFT method was able to reconstruct the 3D model of the hyperbola signature and exhibit the ability to provide clues about the location of the underground object through the representation of the voxel point of the images. Based on these results, the SAFT technique provides good insight into the 3D reconstruction of hyperbola signatures using GPR images in mapping applications.
  • Publication
    Feature Extraction based on Empirical Mode Decomposition for Shapes Recognition of Buried Objects by Ground Penetrating Radar
    ( 2021-06-11)
    Hasimah Ali
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Tengku Sarah Tengku Amran
    ;
    Mohamad Ridzuan Ahmad
    ;
    Mohamed Elshaikh Elobaid Said Ahmed
    Ground penetrating radar (GPR) is one of the promising non-destructive imaging tools investigations for shallow subsurface exploration such as locating and mapping the buried utilities. In practical applications, GPR images could be noisy due to the system noise, the heterogeneity of the medium, and mutual wave interactions thus, it is a complex task to recognizing the hyperbolic signature of buried objects from GPR images. Therefore, this paper aims to develop nonlinear feature extraction technique of using Empirical Mode Decomposition (EMD) in recognizing the four geometrical shapes (cubic, cylindrical, disc and spherical) from GPR images. A pre-processing step of isolating hyperbolic signature from different background was first employed by mean of Region of Interest (ROI). The hyperbolic signature that describes the shapes was extracted using EMD decomposition to obtain a set of significant features. In this framework, the hyperbolic pattern was decomposed of using EMD, to produce a small set of intrinsic mode functions (IMF) via sifting process. The IMF properties of the signature that exhibit the unique pattern was used as potential features to differentiate the geometrical shapes of buried objects. The extracted IMF features were then fed into machine learning classifier namely Support Vector Machines. To evaluate the effectiveness of the proposed method, a set data collection of GPR-images has been acquired. The experimental results show that the recognition rate of using IMF features was achieved 99.12% accuracy in recognizing the shapes of buried objects whose shows the promising result.
      3  2
  • Publication
    A cascade hyperbolic recognition of buried objects using hybrid feature extraction in ground penetrating radar images
    ( 2021-08-27)
    Hasimah Ali
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Wan Khairunizam Wan Ahmad
    ;
    Mohd Shuhanaz Zanar Azalan
    ;
    Tengku Amran T.S.
    ;
    Ahmad M.R.
    ;
    Mohamed Elshaikh Elobaid Said Ahmed
    Ground penetrating radar (GPR) has been acknowledged as effective nondestructive technique for imaging the subsurface. But the process of recognizing hyperbolic pattern of buried objects is subjective and mainly relies upon operator's knowledge and experience. This project proposed a hyperbolic recognition of buried objects using hybrid feature extraction in GPR subsurface mapping. In this framework, a cascade hyperbolic recognition by means of Empirical Mode Decomposition (EMD) and Discrete Wavelet Transform (DWT) are used as hybrid feature recognizing hyperbolic of buried objects. The rationale for an initial focus on cascade hyperbolic recognition is motivated by unique features exhibits by EMD and DWT behaviour in characterizing the hyperbolic pattern which make them particularly well suited to utilities detection in GPR. A series of experiments has been conducted on hyperbolic pattern based on hybrid features using four different geometrical shapes of cubic, cylindrical disc and spherical. Based on the results obtained, the hybrid features of IMF1+ wavelet transform (cH1) shows promising recognition rate in recognizing the hyperbolic that having different geometrical shapes of buried objects.
      1
  • Publication
    3D Reconstruction of embedded object using ground penetrating radar
    ( 2023-01-01)
    Fadil N.D.
    ;
    Hasimah Ali
    ;
    Ahmad Firdaus Ahmad Zaidi
    ;
    Kamal W.H.B.W.
    ;
    Basri N.A.M.
    Ground Penetrating Radar (GPR) is a non-destructive device widely used to locate and map underground utilities such as pipes, cables, etc. Its principle is based on the reflection signal of a transmitter-receiver antenna that strikes underground objects by means of the propagation of a short pulse of electromagnetic waves into the ground. The GPR will produce a hyperbolic curve as a result of the object's presence. Accurate interpretation of hyperbola curves is greatly important and highly depends on user expertise; thus, it is considered a challenge. To address this issue, this study aims to develop 3D reconstructions of embedded objects. In this study, C-scan images were acquired, and 3D interpolation and the Synthetic Aperture Focusing Technique (SAFT) were introduced. In this framework, the acquired data is subjected to pre-processing techniques via time-zero correction, background removal using average background subtraction, and Kirchoff's migration method. The software Reflex 3D Scan has been used to analyse and preprocess the 3D reconstruction of embedded objects. The obtained results show that 3D interpolation and SAFT methods are not only able to reconstruct 3D models but are also able to reveal information on the dimension and location of the buried object represented by voxel points in the 3D space cube.
      1