Voon Chun Hong
Thumbnail Image
Preferred name
Voon Chun Hong
Official Name
Hong, Voon Chun
Alternative Name
Voon, C. H.
Voon, Chun Hong
Hong, Voon Chun
Hong, V. C.
Main Affiliation
Scopus Author ID
55334719400
Researcher ID
D-2050-2015

Research Output

Filters

8 2
8
7 1
Reset filters

Settings
Now showing 1 - 8 of 8
Thumbnail Image
Publication

Effect of zinc oxide suspension on the overall filler content of the PLA/ZnO composites and cPLA/ZnO composites

2023-01-01 , Tan M.A. , Yeoh Cheow Keat , Teh P.L. , Nor Azura Abdul Rahim , Song C.C. , Voon Chun Hong

This work aimed to study the effect of zinc oxide (ZnO) filler suspension on the mechanical, electrical, and thermal properties of polylactic acid (PLA)/ZnO and cPLA/ZnO. Fused deposition modelling, one of the additive manufacturing methods, was used to fabricate the PLA specimen. PLA was used as the main material in this project, and the ZnO suspension was added during the printing process. The speed of the dispenser (low speed = 1,000 rpm, medium speed = 1,400 rpm, and high speed = 1,800 rpm) was the parameter that was varied to control the filler content of the composite. All the samples underwent a tensile test to determine the mechanical properties, followed by the scanning electron microscopy (SEM) test to analyse the fracture surface properties of the tensile test. SEM observations showed the PLA samples' inherent smooth appearance, but the PLA/ZnO composite showed a rougher surface. PLA and cPLA composites showed an enhanced storage modulus but lower loss modulus than the pure samples. Because of the high thermal and electrical conductivity of carbon black and ZnO, cPLA composites had higher electrical and thermal conductivity than PLA composites.

View
Thumbnail Image
Publication

Feasibility Study of Microwave Welding of Polypropylene Using Silicon Carbide Nanowhiskers as Microwave Susceptor

2023-01-01 , Foong P.Y. , Voon Chun Hong , Lim Bee Ying , Teh P.L. , Mohd Afendi Rojan

Currently, welding is the most efficient way for joining of plastic. Due to its rapid heating, efficiency in term of time and energy, and ability to be applied on components of any shape, microwave welding stands out from other welding methods. Additionally, SiCNWs was proposed as the microwave susceptor for the microwave welding of thermoplastic in this work due to its high dielectric loss and biocompatibility. To produce microwave welded joint, SiCNWs was first mixed with acetone to obtain a SiCNWs suspension. After that, SiCNWs was drop casted onto the targeted area of PP, allowed to dry and then microwave irradiated. In this work, the microwave heating time studied ranged from 15 s to 20 s. SEM and single lap shear test were used to characterise the microwave welded joint. From the findings, the tensile strength increased as the microwave heating duration increased from 15 s to 18 s, due to formation of SiCNWs/PP nanocomposite welded joint layer with increasing thickness. Yet, when the microwave heating time was prolonged to 20 s, the tensile strength decreased to 0.85 MPa. Besides, a void was observed at the welded joint and it is believed that the presence of void causes the welded joint to weaken when force is applied. Under properly regulated of microwave heating time, a strengthened nanocomposite welded joint can be produced which demonstrate great promise in plastic welding.

View
Thumbnail Image
Publication

Preparation and Characterization of Tensile Properties of PMMA/SiC Nanowhiskers Nanocomposite Films: Effect of Filler Loading and Silane Treatment

2023-10-01 , Lim Bee Ying , Voon Chun Hong , Lee L.Y. , Teh Pei Leng , Foong P.Y.

The preparation of nanocomposites through melt mixing was challenging as the nanofillers tend to form agglomeration. The silicon carbide nanowhiskers (SiCNWs) filled poly (methyl methacrylate) (PMMA) thin film in this study was prepared by means of solution casting. Acetone with low toxicity was used as solvent to dissolve the PMMA pellets. A coupling agent, silane was used to enhance the properties of composite films. Besides, the untreated and treated SiCNWs were filled into PMMA matrix, respectively with the filler loading varied from 0.2 to 0.8 wt%. The universal testing machine was used to investigate the tensile properties of composites. It was found out that the tensile strength of the PMMA was reduced in the presence of SiCNWs. However, the tensile strength had increased with the rise of filler loading. At 0.8 wt% of SiCNWs, the composites’ tensile strength was comparable to virgin PMMA. Meanwhile, the SiCNWs had reduced the elongation at break but increased the elastic modulus of PMMA/SiCNWs nanocomposite films. In addition, silane surface treatment on SiCNWs had improved the tensile strength and ductility but lowered the elastic modulus of the nanocomposites. The improvement was due to the enhancement of interfacial adhesion between SiCNWs and PMMA.

View
Thumbnail Image
Publication

Facile Electrical DNA Genosensor for Human Papillomavirus (HPV 58) for Early Detection of Cervical Cancer

2023-07-01 , Jaapar F.N. , Nor Azizah Parmin , Halim N.H.A. , Uda Hashim , Subash Chandra Bose Gopinath , Ruslinda A. Rahim , Nadzirah S. , Voon Chun Hong , Muhammad Nur Aiman Uda , Ang W.C. , Zakaria I.I. , Rejali Z. , Afzan A. , Hamzah A.A. , Dee C.F. , Halim F.S.

For decades, a Pap smear test has been applied as a conventional method in detecting Human Papillomavirus caused cervical cancer. False-positive results were also recorded while using it as conventional method. Current biosensor such as Hybrid (II) Capture resulted in higher time consumption and cost. s Meanwhile, in this study we provided facile, mini, rapid, highly sensitive, eco-friendly, and cost-effective sensing system focusing on HPV strain 58 (HPV58) in a nano-size lab-on-chip technology genosensor. 30-mer of virus ssDNA designed and analyzed as a probe via bioinformatics tools such as GenBank, Basic Local Alignment Searching Tools (BLAST) and ClustalW. Nanotechnology-developed colloidal Gold-nanoparticles (AuNPs) are used in the biosensor fabrication to produce high stability and electron efficient transmission during electrical measurement. AuNPs-APTES modified on active sites of IDEs, followed by immobilization of specific probe ssDNA for HPV 58. Hydrogen binding during hybridization with its target produce electrical signals measured by KEITHLEY 2450 (Source Meter). The genosensor validated with different types of targets such as complimentary, non-complementary and single mismatch oligonucleotides. The serial dilution of target concentration has been experimented triplicate (n=3) range from 1fM to 10µM. The slope of calibration curve resulted 2.389E-0 AM-1 with regression coefficient (R2) = 0.97535.

View
Thumbnail Image
Publication

Potentials of MicroRNA in Early Detection of Ovarian Cancer by Analytical Electrical Biosensors

2022-01-01 , Nor Azizah Parmin , Uda Hashim , Subash Chandra Bose Gopinath , Nadzirah S. , Salimi M.N. , Voon Chun Hong , Muhammad Nur Aiman Uda , Muhammad Nur Afnan Uda , Rozi S.K.M. , Rejali Z. , Afzan A. , Azan M.I.A. , Yaakub A.R.W. , Hamzah A.A. , Dee C.F.

The importance of nanotechnology in medical applications especially with biomedical sensing devices is undoubted. Several medical diagnostics have been developed by taking the advantage of nanomaterials, especially with electrical biosensors. Biosensors have been predominantly used for the quantification of different clinical biomarkers toward detection, screening, and follow-up the treatment. At present, ovarian cancer is one of the severe complications that cannot be identified until it becomes most dangerous as the advanced stage. Based on the American Cancer Society, 20% of cases involved in the detection of ovarian cancer are diagnosed at an early stage and 80% diagnosed at the later stages. The patient just has a common digestive problem and stomach ache as early symptoms and people used to ignore these symptoms. Micro ribonucleic acid (miRNA) is classified as small non-coding RNAs, their expressions change due to the association of cancer development and progression. This article reviews and discusses on the currently available strategies for the early detection of ovarian cancers using miRNA as a biomarker associated with electrical biosensors. A unique miRNA-based biomarker detections are specially highlighted with biosensor platforms to diagnose ovarian cancer.

View
Thumbnail Image
Publication

Designing DNA probe from HPV 18 and 58 in the E6 region for sensing element in the development of genosensor-based gold nanoparticles

2022-10-01 , Jaapar F.N. , Nor Azizah Parmin , Nur Hamidah Abdul Halim , Uda Hashim , Subash Chandra Bose Gopinath , Halim F.S. , Ruslinda A. Rahim , Voon Chun Hong , Muhammad Nur Aiman Uda , Muhammad Nur Afnan Uda , Nadzirah S. , Rejali Z. , Afzan A. , Zakaria I.I.

The E6 region has higher protuberant probability annealing than consensus probe focusing on another region in the human papillomavirus (HPV) genome in terms of detection and screening method. Here, we designed the first multiple virus single-stranded deoxyribonucleic acid (ssDNA) for multiple detections in an early phase of screening for cervical cancer in the E6 region and became a fundamental evolution of detection electrochemical HPV biosensor. Gene profiling of the virus ssDNA sequences has been carried by high-end bioinformatics tools such as GenBank, Basic Local Alignment Searching Tools (BLAST), and Clustal OMEGA in a row. The output from bioinformatics tools resulted in 100% of similarities between our virus ssDNA probe and HPV complete genome in the databases. The cross-validation between HPV genome and our designed virus ssDNA provided high specificity and selectivity during screening methods compared with Pap smear. The DNA probe for HPV 18, 5′ COOH-GAT CCA GAA GGT ACA GAC GGG GAG GGC ACG 3′, while 5′COOH-GGG CGC TGT GCA GTG TGT TGG AGA CCC CGA3′ as DNA probe for HPV 58 designed with 66.77% guanine (G) and cytosine (C) content for both. Our virus ssDNA probe for the HPV biosensor promises high sensitivity, specificity, selectivity, repeatability, low fluid consumption, and will be useful in mini-size diagnostic devices for cervical cancer detection.

View
Thumbnail Image
Publication

The effect of coated calcium carbonate using stearic acid on the recovered carbon black masterbatch in low-density polyethylene composites

2023-01-01 , Leow V.J. , Teh Pei Leng , Yeoh C.K. , Nor Azura Abdul Rahim , Wong W.C. , Voon Chun Hong , Mohamed Rasidi M.S. , Lim Bee Ying

This research focuses on recycling rubber tire waste through pyrolysis to produce recovered carbon black (rCB). The rCB is combined with recycled low-density polyethylene (rLDPE), calcium carbonate (CaCO3), fatty acid, metallic stearate, and polyethylene (PE) wax to create an rCB masterbatch for household packaging. Surface modification of CaCO3 particles using stearic acid improves the compatibility with LDPE. The study investigates mechanical properties, morphology, melt flow index (MFI), X-ray diffraction, and thermogravimetric analysis in three systems: uncoated, coated, and a hybrid combination of coated and uncoated CaCO3 in LDPE/rCB masterbatch composites. The coated system demonstrates higher mechanical properties and improved compatibility between CaCO3 and LDPE. All three systems exhibit enhanced thermal stability and MFI compared to virgin LDPE, with the coated system showing the most significant improvement. The study showcases the potential of LDPE/rCB masterbatch composites for household packaging, with the coated system displaying the optimum performance across various characteristics.

View
Thumbnail Image
Publication

Formation of polypropylene nanocomposite joint using silicon carbide nanowhiskers as novel susceptor for microwave welding

2023-05-01 , Foong P.Y. , Voon Chun Hong , Lim B.Y. , Teh P.L. , Mohd Afendi Rojan , Subash Chandra Bose Gopinath , Mohd Khairuddin Md Arshad , Nor Azizah Parmin , Low F.W. , Ruslinda A. Rahim , Uda Hashim

Up to present, no study has reported on the use of silicon carbide nanomaterials (SiCNMs) as susceptor for microwave welding of thermoplastics. Therefore, in this study, silicon carbide nanowhiskers (SiCNWs) was attempted as the microwave susceptor for the microwave welding of polypropylene (PP). It was observed that SiCNWs are capable of absorbing microwave and converting them into heat, leading to a sharp increase in temperature until it reaches the melting point of PP substrates. The microwave welded joint is formed after the molten PP at the interface between PP substrates is cooled under pressure. The effect of microwave heating duration and solid loading of SiCNWs suspension was studied and reported. The formation mechanism of SiCNWs reinforced PP welded joint was proposed in this study. With these remarkable advantages of microwave welding and enhanced mechanical properties of the welded joint, it is believed that this study can provide a new insight into welding of thermoplastic and material processing through short-term microwave heating.

View