Options
Siti Rafidah Abdul Rahim
Preferred name
Siti Rafidah Abdul Rahim
Official Name
Siti Rafidah, Abdul Rahim
Alternative Name
Abdul Rahim, Siti Rafidah
Rahim, S. R.
Rahim, S.R.A
Abdul Rahim, S.R.
Rahim, S.R. Abd
Main Affiliation
Scopus Author ID
11639107900
Researcher ID
E-5412-2011
Now showing
1 - 4 of 4
-
PublicationIntegration of Multiple Distributed Generation Sources in Radial Distribution System Using a Hybrid Evolutionary Programming-Firefly Algorithm(Universiti Malaysia Perlis, 2024-02-29)
;Nik Hasmadi Nik Hassan ; ; ; ; ;Ismail MusirinSazwan IshakThis paper presents an approach for the optimal integration of multiple distributed generation (DG) sources in a radial distribution system. The integration of DG sources poses various challenges such as can lead to higher power losses caused by reverse power flow, voltage exceeding secure limits, voltage stability, power quality, and economic operation. To address these challenges, a hybrid algorithm is proposed which combines the benefits of both Evolutionary Programming and Firefly Algorithm. The proposed hybrid Evolutionary - Firefly Algorithm is employed for the determination of the optimal size of the DG sources. The objective of the proposed algorithm is to minimize the total system power losses and improve the voltage profile. The algorithm considers various constraints including the DG capacity limits and voltage limits. A comprehensive case study is conducted on a radial distribution system to demonstrate the effectiveness of the proposed approach. The simulation results show that the hybrid algorithm can find the optimal size and location of DG sources while achieving the desired system performance. The integration of multiple DG sources leads to a significant reduction in power losses and improved voltage profile. Furthermore, the proposed approach provides a flexible framework for the optimal integration of DG sources in radial distribution systems, allowing for the accommodation of different types and capacities of DG sources. The proposed technique is tested on the IEEE Reliability Test systems, specifically the IEEE 69-bus. The combination of DG at bus 61 and bus 27 yields a loss reduction index of 94%. -
PublicationA comparative study on DG placement using marine predator and Osprey algorithms to enhance loss reduction index in the distribution system(Iran University of Science and Technology, 2025-06)
; ; ; ; ;Syazwan Ahmad SabriIsmail MusirinThe Marine Predator Algorithm (MPA) and Osprey Optimization Algorithm (OOA) are nature-inspired metaheuristic techniques used for optimizing the location and sizing of distributed generation (DG) in power distribution systems. MPA simulates marine predators' foraging strategies through Lévy and Brownian movements, while OOA models the hunting and survival tactics of ospreys, known for their remarkable fishing skills. Effective placement and sizing of DG units are crucial for minimizing network losses and ensuring cost efficiency. Improper configurations can lead to overcompensation or undercompensation in the network, increasing operational costs. Different DG technologies, such as photovoltaic (PV), wind, microturbines, and generators, vary significantly in cost and performance, highlighting the importance of selecting the right models and designs. This study compares MPA and OOA in optimizing the placement of multiple DGs with two types of power injection which are active and reactive power. Simulations on the IEEE 69-bus reliability test system, conducted using MATLAB, demonstrated MPA’s superiority, achieving a 69% reduction in active power losses compared to OOA’s 61%, highlighting its potential for more efficient DG placement in power distribution systems. The proposed approach incorporates a DG model encompassing multiple technologies to ensure economic feasibility and improve overall system performance. -
PublicationOptimal Integration of Active and Reactive Power DGs in Distribution Network via a Novel Multi-Objective Intelligent Technique( 2024-01-01)
;Azlina Abdullah ;Ismail Musirin ;Muhammad Murthada Othman ; ;Sharifah Azwa ShaayaSenthil Kumar A.V.This work introduces a novel approach called the Multi-Objective Integrated Immune Moth Flame Evolutionary Programming (MO-IIMFEP) algorithm. This algorithm aims to determine the optimal sizes and positions for Type III distributed generators (DGs) that generate both active and reactive power. The objectives involve reducing overall losses in the distribution system while adhering to voltage restrictions and taking into account the cost limitations connected with the installation of DG. MO-IIMFEP overcomes the constraints of traditional Evolutionary Programming (EP) and Moth Flame Optimization (MFO), particularly in effectively handling local optima. Fuzzy logic is employed in MO-IIMFEP to determine the best solution to compromise conflicting goals, as obtained from the non-dominated Pareto solutions. The efficacy of MOIIMFEP in identifying optimal solutions for multi-objective problems is demonstrated through comprehensive assessments conducted on the 118-Bus Radial Distribution Systems (RDS), comparing it against MO-EP and MO-MFO. The results underscore the strategic benefits of DG installation in sustaining voltage levels, reducing power losses, and minimizing total operating costs for power suppliers.10 16 -
PublicationCost of energy losses analysis using a hybrid evolutionary programming-firefly algorithm for distributed generation installation( 2022)
;Noor Najwa Husnaini Mohammad Husni ; ; ;Muhammad Hatta HussainIsmail MusirinThis paper presents the Hybrid Evolutionary Programming-Firefly Algorithm (EPFA) technique for the cost of energy losses analysis of distributed generation (DG). In this study, EPFA is developed to determine the optimal size of DG while considering the system’s energy losses. EPFA is developed based on embedded Firefly Algorithm (FA) properties into the classical EP technique. The objective of this study was to reduce the cost of energy losses while increasing the voltage profile and minimizing distribution system losses between the different operational strategies and types of DG. In this study, the analysis was done by considering DG type 1 and DG type 2. The proposed technique was tested using the IEEE 69-bus test system. In terms of economic concerns, power system planners can use the information acquired for utility planning to determine the right location and capacity of DG. Finally, the proposed method can determine the appropriate DG sizing while reducing the cost of energy losses and total losses in the system, based on the simulation results.3 3