Norsuria Mahmed
Thumbnail Image
Preferred name
Norsuria Mahmed
Official Name
Norsuria, Mahmed
Alternative Name
Mahmed, Norsuria
Mahmed, N.
Norsuria, Mahmed
Norsuria, M.
Main Affiliation
Scopus Author ID
24802694300
Researcher ID
FOC-8505-2022

Research Output

Filters

6 1
6
Reset filters

Settings
Now showing 1 - 6 of 6
Thumbnail Image
Publication

Effect of polyethylene glycol and sodium dodecyl sulphate on microstructure and self-cleaning properties of graphene oxide/TiO2 thin film

2020-09-01 , Azani A. , Dewi Suriyani Che Halin , Kamrosni Abdul Razak , Mohd. Mustafa Al Bakri Abdullah , Norsuria Mahmed , Muhammad Mahyiddin Ramli , Mohd Arif Anuar Mohd Salleh , Mohd Fairul Sharin Abdul Razak , Ayu Wazira Azhari , Chobpattana V. , Kaczmarek L.

In this study, a sol gel procedure for preparation of TiO2 thin films with graphene oxide (GO) was developed. The effect of PEG and SDS addition on the microstructure of the films as well as the photocatalytic activity of the thin film was also investigated. The morphology and surface structure of the films were studied by SEM and AFM while the photocatalytic activity of the films was analyzed by measuring the degradation of methylene blue under sunlight irradiation using UV-Vis spectrophotometer. It was found that GO/TiO2 thin film with PEG shows a smaller and porous particle while GO/TiO2 thin film with SDS formed a very smooth surface and very fine particles. Therefore, in AFM analysis reveals that surface roughness decreases with the addition of PEG and SDS. Finally, the photocatalytic activity showed that GO/TiO2 thin film with SDS have the most effective self-cleaning property which degrade 64% of methylene blue that act as model of contaminants.

View
Thumbnail Image
Publication

Microstructural Study on Ag/TiO2 Thin Film

2022-07-01 , Kamrosni Abdul Razak , Dewi Suriyani Che Halin , Azliza Azani , Mohd. Mustafa Al Bakri Abdullah , Mohd Arif Anuar Mohd Salleh , Norsuria Mahmed , Chobpattana V. , Kaczmarek L. , Sandu A.V. , Garus S.

The synthesis of Ag/TiO2 thin film was carried out by the sol–gel spin coating method using ITO glass as a substrate in a short period of stirring time, which is less than 25 min. The produced films were annealed in a furnace at 500◦C for 1 h. Various concentrations of AgNO3, from 0.1 to 0.9 M, were added. The as-prepared films were characterized using X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The results indicate that all films showed a single phase of anatase, TiO2. Ag/TiO2 thin films with 0.1 M of AgNO3 solution show that the elements form networks connecting Ag/TiO2 microstructures forming a porous, consistent, and continuous layer on the substrate surface.

View
Thumbnail Image
Publication

Microstructural studies of ag/tio2 thin film; effect of annealing temperature

2022-01-01 , Kamrosni A.R. , Dewi Suriyani Che Halin , Azliza A. , Mohd. Mustafa Al Bakri Abdullah , Mohd Arif Anuar Mohd Salleh , Norsuria Mahmed , Chobpattana V. , Kaczmarek L. , Jez B. , Nabialek M.

Microstructures are an important link between materials processing and performance, and microstructure control is essential for any materials processing route where the microstructure plays a major role in determining the properties. In this work, silverdoped titanium dioxide (Ag/TiO2) thin film was prepared by the sol-gel method through the hydrolysis of titanium tetra-isopropoxide and silver nitrate solution. The sol was spin coated on ITO glass substrate to get uniform film followed by annealing process for 2 hours. The obtained films were annealed at different annealing temperatures in the range of 300°C-600°C in order to observe the effect on crystalline state, microstructures and optical properties of Ag/TiO2thin film. The thin films were characterized by X-Ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis spectrophotometry. It is clearly seen, when the annealing temperature increases to 500°C, a peak at 2θ = 25.30° can be seen which refers to the structure of TiO2tetragonal anatase. The structure of Ag/TiO2thin film become denser, linked together, porous and uniformly distributed on the surface and displays the highest cut-off wavelength value which is 396 nm with the lowest band gap value, which is 3.10 eV.

View
Thumbnail Image
Publication

Factors of Controlling the Formation of Titanium Dioxide (TiO2) Synthesized using Sol-gel Method - A Short Review

2022-01-24 , Kamrosni Abdul Razak , Dewi Suriyani Che Halin , Mohd. Mustafa Al Bakri Abdullah , Mohd Arif Anuar Mohd Salleh , Norsuria Mahmed , Azliza Azani , Chobpattana V.

There have been experiments on TiO2 thin films synthesized utilizing sol-gel techniques. The sol-gel method is a straightforward technology that gives numerous benefits to the researcher, for instance, material's reliability, reproducibility, and controllability. Following from there, it can be utilized to make high-quality nano-structured thin films. According to previous studies, the TiO2 films' characteristics occur to be highly dependent on the production parameters and initial materials utilized. Controlling the formation of TiO2 thin films with the sol-gel method was momentarily discussed here.

View
Thumbnail Image
Publication

Effect of graphene oxide on microstructure and optical properties of TiO2 thin film

2019-01-01 , Azani A. , Dewi Suriyani Che Halin , Razak K.A. , Mohd. Mustafa Al Bakri Abdullah , Mohd Salleh M.A.A. , Abdul Razak M.F.S. , Norsuria Mahmed , Ramli M.M. , Ayu Wazira Azhari , Chobpattana V.

GO/TiO2 thin films have been synthesized from titanium (IV) isopropoxide (TTIP) by a sol-gel method. The films were deposited onto a glass substrate using spin coating deposition technique then were subjected to annealed process at 350 °C. The different amount of graphene oxide (GO) was added into the parent solution of sol in order to investigate the microstructure, topography, optical band gap and photocatalytic activity of the thin films. The prepared thin films were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), UV-VIS spectrophotometry and degradation of methylene blue (MB). AFM images reveal a rougher surface of GO/TiO2 thin film than bare TiO2 thin film due to GO particles. Moreover, the SEM images showed the formation of semispherical microstructure of bare TiO2 changes to some larger combined molecules with GO addition. The UV-Vis spectrophotometer results show that with optical direct energy gap decreases from 3.30 to 3.18 eV after GO addition due to the effect of high surface roughness and bigger grain size. Furthermore, the optical results also indicated that GO improved the optical properties of TiO2 in the visible range region.

View
Thumbnail Image
Publication

Self-cleaning property of ag/tio2 thin film

2020-01-01 , Kamrosni Abdul Razak , Dewi Suriyani Che Halin , Azliza Azani , Mohd. Mustafa Al Bakri Abdullah , Mohd Arif Anuar Mohd Salleh , Norsuria Mahmed , Chobpattana V.

Ag/TiO2 thin film was prepared by the sol-gel method through the hydrolysis of titanium tetraisopropoxide and silver nitrate solution. Spin coating method was used to get uniform film on ITO glass substrate followed by annealing process for 1 hour. After that, all the samples were characterised using GIXRD and FESEM and undergone water contact angle test and MB degradation. Silver ion concentrations were varied to observe the effect on crystalline state, morphology, wettability and photocatalytic properties. The results showed that Ag/TiO2 thin film was in anatase phase and it could degrade nearly 70% of methylene blue after 150 min illumination. The formed Ag/TiO2 thin film has excellent self-cleaning property with compact, continuous, smooth, and good hydrophilicity property.

View