Mohd. Mustafa Al Bakri Abdullah
Thumbnail Image
Preferred name
Mohd. Mustafa Al Bakri Abdullah
Official Name
Abdulah, Mohd. Mustafa Al Bakri
Alternative Name
Abdullah, M.M.A.
M.M.A. Abdullah
Mustafa Al Bakri, A. M.
Albakri Abdullah, M. M.
Main Affiliation
CeGeoGTech UniMAP
Scopus Author ID
53164519100

Research Output

Filters

3
Reset filters

Settings
Now showing 1 - 3 of 3
  • Publication
    The ProPerTies of Ground GranulaTed BlasT furnace slaG liGhTweiGhT aGGreGaTe (Gla) aT Various Molar raTio and iTs aPPlicaTion in concreTe
    ( 2023-01-01)
    Rafiza Abd Razak
    ;
    Hassan M.A.
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Zarina Yahya
    ;
    Ariffin M.A.M.
    ;
    Ahmad Faizal Mansor
    ;
    Hao D.L.C.
    The effects of supplementary cementitious materials (SCM) on the characteristics and internal structure of synthetic aggregate made from ground granulated blast furnace slag are investigated in this study (GGBS). Due to its high pozzolanic activity, GGBS was shown to be superior to other SCM materials, enhancing both the strength and durability of synthetic aggregate. Because sintering uses a lot of energy and generates a lot of pollutants, using a cold-bonded approach to make low density lightweight aggregates is particularly significant from an economic and environmental standpoint. Thus, the utilisation of ground granulated blast furnace slag (GGBS) as a substitute material in the production of green artificial lightweight aggregate (GLA) using the cold bonding method was discussed in this work. Admixtures of ADVA Cast 203 and Hydrogen Peroxide were utilised to improve the quality of GLA at various molar ratios. The freshly extracted GLA was then evaluated for specific gravity, water absorption, aggregate impact, and aggregate crushing in order to determine the optimal proportion blend. As a result, the overall findings offer great application potential in the development of concrete (GCLA). It has been determined that aggregates with a toughness of 14.6% and a hardness of 15.9% are robust. The compressive strength test found that the GCLA has a high strength lightweight concrete of 37.19 MPa and a density of 1845.74 kg/m3. The porous features developed inside the internal structure of GLA have led to GCLA’s less weight compared to conventional concrete.
      2
  • Publication
    The Effect of NaOH Concentration on Palm Oil Boiler Ash (POBA) based Geopolymer Artificial Aggregate
    ( 2024-04-19)
    Hao D.L.C.
    ;
    Rafiza Abd Razak
    ;
    Zarina Yahya
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Subaer
    Industrial wastes or by-products can be used to create artificial aggregates. Solid waste created by the palm oil industry is a significant environmental problem that requires immediate and long-term solutions. The optimal ratio of geopolymer-based palm oil boiler ash (POBA) aggregate in terms of specific gravity, water absorption, and aggregate impact value was explored in this work. Because of its high percentages of silica oxide (SiO2) and aluminium oxide (Al2O3), POBA was chosen as the primary precursor for the geopolymer (Al2O3). The POBA aggregate with the lowest specific gravity was 1.662, while all of the geopolymer-based POBA aggregates had specific gravities below 2. The geopolymer-based POBA aggregate absorbs more water than the natural aggregate. The aggregate effect value for sodium hydroxide concentrations (6M, 8M, 10M, 12M, 14M) is less than 30%, which is considered strong.
      1
  • Publication
    Artificial Lightweight Aggregates Made from Pozzolanic Material: A Review on the Method, Physical and Mechanical Properties, Thermal and Microstructure
    (MDPI, 2022-06-01)
    Hao D.L.C.
    ;
    Rafiza Abd Razak
    ;
    Kheimi M.
    ;
    Zarina Yahya
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Nergis D.D.B.
    ;
    Fansuri H.
    ;
    Ediati R.
    ;
    Mohamed R.
    ;
    Abdullah A.
    As the demand for nonrenewable natural resources, such as aggregate, is increasing worldwide, new production of artificial aggregate should be developed. Artificial lightweight aggregate can bring advantages to the construction field due to its lower density, thus reducing the dead load applied to the structural elements. In addition, application of artificial lightweight aggregate in lightweight concrete will produce lower thermal conductivity. However, the production of artificial lightweight aggregate is still limited. Production of artificial lightweight aggregate incorporating waste materials or pozzolanic materials is advantageous and beneficial in terms of being environmentally friendly, as well as lowering carbon dioxide emissions. Moreover, additives, such as geopolymer, have been introduced as one of the alternative construction materials that have been proven to have excellent properties. Thus, this paper will review the production of artificial lightweight aggregate through various methods, including sintering, cold bonding, and autoclaving. The significant properties of artificial lightweight aggregate, including physical and mechanical properties, such as water absorption, crushing strength, and impact value, are reviewed. The properties of concrete, including thermal properties, that utilized artificial lightweight aggregate were also briefly reviewed to highlight the advantages of artificial lightweight aggregate.
      2  10