Mohd Aminudin Jamlos
Thumbnail Image
Preferred name
Mohd Aminudin Jamlos
Official Name
Mohd Aminudin , Jamlos
Alternative Name
Aminuddin Jamlos, Mohd
Jamlos, M. A.
Jamlos, Mohd Aminuddin
Jamlos, Mohd A.
Jamlos, Mohd
Main Affiliation
Scopus Author ID
36010739800
57210119953
Researcher ID
AGU-7505-2022

Research Output

Filters

3
2
3
2 1
Reset filters

Settings
Now showing 1 - 3 of 3
Thumbnail Image
Publication

Perpendicular High Isolation MIMO Antenna

2022-01-01 , Mohd Aminudin Jamlos , Sabri N.H.M. , Wan Azani Wan Mustafa , Khairul Najmy Abdul Rani , Syed Zulkarnain Syed Idrus , Husna H.

This research presented a perpendicular high isolation MIMO antenna for LTE advance application. A high gain perpendicular MIMO antenna is concentrated on designing used in LTE advance application. The issues of low isolation of conventional antenna can be solved by structuring a MIMO antenna in order to increase the isolation in LTE advance application. Generally, the array antenna design causes a bigger antenna size and has a mutual coupling which lead to spectral efficiency damage and reduce the MIMO antenna framework performance. The substrate material like FR-4 is choosing as a dielectric substrate due to its good performances for many applications beside it has a low cost and more usable. The advantage of copper such as has a great relative material, cheaper and easy to construct is choose in this project as a conductive material. ADS software has been utilized for the structure stage to design the antenna. Then, the results are evaluated in terms of return loss (S11 and S22), mutual coupling (S12 and S21), match impedance, directivity, radiation pattern, gain and radiated power. Vector Network Analyzer (VNA) is used to measure the fabricated antenna. The factor of cable loses and the soldering technique will make the measurement result was slightly change from the simulating result. However, the antenna design satisfied the proficiency necessity of the antenna which the frequency is drop at 2.5 GHz with the return loss is below than −10 dB.

View
No Thumbnail Available
Publication

2 × 1 Circularly Polarized Rectangular Microstrip Patch Array Antenna

2022-01-01 , Sabri N.H.M. , Mohd Aminudin Jamlos , Seng L.Y.

This paper presents a high gain of 2 × 1 circularly polarized rectangular microstrip array antenna for wide communication. This paper study the design and the simulation of the array antenna in terms of S-parameter, antenna gain, and the axial ratio. The 2 × 1 array antenna with dimension of 130 × 80 mm is proposed. The presented design is composed of two elements of microstrip patch antenna with an array configuration. The truncated edge of the patch and the inclined slot are the techniques used in order to achieve circular polarized capability. The antenna is fed by microstrip transmission line with full ground plane and etched on Rogers RT 5880 substrate with 2.2 and 0.51 mm of dielectric constant and thickness respectively. The antenna substrate is layered by 3 layers in order to increase the substrate thickness to 1.53 mm. The patch antenna is fed by using microstrip transmission line which separated into two lines based on the number of radiating elements. The quarter wave impedance matching technique is used to match the radiating patch. The 50 Ω transmission line are utilized to be matching between 70 Ω and 100 Ω. The 2 × 1 array antenna achieved a gain of 10.77 dB with a return loss of −24. 63 dB at a desired frequency of 5.8 GHz.

View
Thumbnail Image
Publication

5.8 GHz Circularly Polarized Rectangular Microstrip Antenna Arrays simulation for Point-to-Point Application

2022-11-01 , Mohd Aminudin Jamlos , Sabri N.H.M. , Jamlos M.F. , Wan Azani Wan Mustafa , Syed Zulkarnain Syed Idrus , Mohamad Nur Khairul Hafizi Rohani , Khairul Najmy Abdul Rani , Mohd Al-Hafiz Mohd Nawi

In this paper, the design and simulation of rectangular microstrip antenna arrays for improving antenna gain is performed for point-to-point application. The circular polarization is proposed to restrict the limitation of linear polarization which is less reliable in base station antenna. The circular polarization antenna is made to allow the receiver constantly to receive the power at any wave angle and make the transmission between two antennas are more constant. The proposed design is composed of four elements microstrip antenna with an array configuration operating at 5.8 GHz. Each element is constructed from four truncated arrays radiating elements and an inclined slot on each patch which capable to achieve circular polarized capability. The design of the 2x1 and 2x2 of rectangular microstrip array antenna was implemented from the design of single rectangular patch antenna as the basic building element. The designed 2x1 and 2x2 array were fed by microstrip transmission line which applied a technique of quarter wave impedance matching. The antenna design was etched on Rogers RT 5880 substrate with 2.1 and 1.53 mm of dielectric constant and thickness respectively. All the designed structure were simulated in CST software. The main results of the designed antennas were compared in terms of gain, axial ratio and return loss. Based on the return loss simulation results, the designed antennas resonated exactly at the desired resonant frequency of 5.8 GHz which indicates good antenna designs. Compared to the single patch antenna having an antenna gain of 8.26 dB, the 2x1 and 2x2 arrays achieved a gain of 10.24 dB and 13.29 dB respectively. The results show that the designed rectangular microstrip antenna arrays have an improved gain performance over the single patch antenna.

View