Kamrosni Abdul Razak
Thumbnail Image
Preferred name
Kamrosni Abdul Razak
Official Name
Razak, Kamrosni Abdul
Alternative Name
Abdul Razak, Kamrosni
Razak, K. Abdul
Razak, Kamrosni Ab
Razak, Kamrosni Abdul
Razak, K. A.
Abdul Razak, K.
K., Abdul Razak
Main Affiliation
Scopus Author ID
57207592874
Researcher ID
DNW-1117-2022

Research Output

Filters

5 1
5
Reset filters

Settings
Now showing 1 - 5 of 5
Thumbnail Image
Publication

Effect of polyethylene glycol and sodium dodecyl sulphate on microstructure and self-cleaning properties of graphene oxide/TiO2 thin film

2020-09-01 , Azani A. , Dewi Suriyani Che Halin , Kamrosni Abdul Razak , Mohd. Mustafa Al Bakri Abdullah , Norsuria Mahmed , Muhammad Mahyiddin Ramli , Mohd Arif Anuar Mohd Salleh , Mohd Fairul Sharin Abdul Razak , Ayu Wazira Azhari , Chobpattana V. , Kaczmarek L.

In this study, a sol gel procedure for preparation of TiO2 thin films with graphene oxide (GO) was developed. The effect of PEG and SDS addition on the microstructure of the films as well as the photocatalytic activity of the thin film was also investigated. The morphology and surface structure of the films were studied by SEM and AFM while the photocatalytic activity of the films was analyzed by measuring the degradation of methylene blue under sunlight irradiation using UV-Vis spectrophotometer. It was found that GO/TiO2 thin film with PEG shows a smaller and porous particle while GO/TiO2 thin film with SDS formed a very smooth surface and very fine particles. Therefore, in AFM analysis reveals that surface roughness decreases with the addition of PEG and SDS. Finally, the photocatalytic activity showed that GO/TiO2 thin film with SDS have the most effective self-cleaning property which degrade 64% of methylene blue that act as model of contaminants.

View
Thumbnail Image
Publication

Self-cleaning property of ag/tio2 thin film

2020-01-01 , Kamrosni Abdul Razak , Dewi Suriyani Che Halin , Azliza Azani , Mohd. Mustafa Al Bakri Abdullah , Mohd Arif Anuar Mohd Salleh , Norsuria Mahmed , Chobpattana V.

Ag/TiO2 thin film was prepared by the sol-gel method through the hydrolysis of titanium tetraisopropoxide and silver nitrate solution. Spin coating method was used to get uniform film on ITO glass substrate followed by annealing process for 1 hour. After that, all the samples were characterised using GIXRD and FESEM and undergone water contact angle test and MB degradation. Silver ion concentrations were varied to observe the effect on crystalline state, morphology, wettability and photocatalytic properties. The results showed that Ag/TiO2 thin film was in anatase phase and it could degrade nearly 70% of methylene blue after 150 min illumination. The formed Ag/TiO2 thin film has excellent self-cleaning property with compact, continuous, smooth, and good hydrophilicity property.

View
Thumbnail Image
Publication

Microstructural Study on Ag/TiO2 Thin Film

2022-07-01 , Kamrosni Abdul Razak , Dewi Suriyani Che Halin , Azliza Azani , Mohd. Mustafa Al Bakri Abdullah , Mohd Arif Anuar Mohd Salleh , Norsuria Mahmed , Chobpattana V. , Kaczmarek L. , Sandu A.V. , Garus S.

The synthesis of Ag/TiO2 thin film was carried out by the sol–gel spin coating method using ITO glass as a substrate in a short period of stirring time, which is less than 25 min. The produced films were annealed in a furnace at 500◦C for 1 h. Various concentrations of AgNO3, from 0.1 to 0.9 M, were added. The as-prepared films were characterized using X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The results indicate that all films showed a single phase of anatase, TiO2. Ag/TiO2 thin films with 0.1 M of AgNO3 solution show that the elements form networks connecting Ag/TiO2 microstructures forming a porous, consistent, and continuous layer on the substrate surface.

View
Thumbnail Image
Publication

The effect of GO/TiO2 thin film during photodegradation of methylene blue dye

2021-09-01 , Azliza Azani , Dewi Suriyani Che Halin , Mohd. Mustafa Al Bakri Abdullah , Kamrosni Abdul Razak , Mohd Fairul Sharin Abdul Razak , Muhammad Mahyiddin Ramli , Mohd Arif Anuar Mohd Salleh , Chobpattana V.

Titanium (IV) isopropoxide (TTIP) was used to synthesize GO/TiO2 thin films using a sol-gel spin-coating method onto a glass substrate, undergoing an heat tretment at 350 °C. Several amounts of graphene oxide (GO) (0-20mg) were weighed into a sol solution of TiO2 to produce GO/TiO2 thin films. The thin film samples were characterized by X-ray diffraction (XRD) to analyze the samples’ phase and by scanning electron microscopy (SEM) to analyze the samples’ microstructure. Physical testing such as water contact angle (WCA) was analyzed using an optical microscope with J-Image software. In contrast, the optical band gap and photodegradation of methylene blue under sunlight irradiation of the thin film was analyzed using UV-VIS spectrophotometry. GO5 thin film sample showed low-intensity anatase phase formation, where the microstructure revealed a larger surface area with the addition of GO. WCA reveals that GO/TiO2 thin film exhibits super hydrophilic properties where the angle decreases from 37.83° to 4.11°. The optical result shows that GO has improved the absorption edges by expanding into visible regions. Moreover, due to the existence of GO 3.30 eV band gap energy of TiO2 decreases from to 3.18 eV obtained by GO5. The improved adsorption edge allows Ti3+, O2 and interstitial states to be formed in low valence states with energy underneath than in the TiO2 band gap. Therefore, the photodegradation of methylene blue (MB) dye increases from 48 % to 59 % in the GO/TiO2 thin film.

View
Thumbnail Image
Publication

Factors of Controlling the Formation of Titanium Dioxide (TiO2) Synthesized using Sol-gel Method - A Short Review

2022-01-24 , Kamrosni Abdul Razak , Dewi Suriyani Che Halin , Mohd. Mustafa Al Bakri Abdullah , Mohd Arif Anuar Mohd Salleh , Norsuria Mahmed , Azliza Azani , Chobpattana V.

There have been experiments on TiO2 thin films synthesized utilizing sol-gel techniques. The sol-gel method is a straightforward technology that gives numerous benefits to the researcher, for instance, material's reliability, reproducibility, and controllability. Following from there, it can be utilized to make high-quality nano-structured thin films. According to previous studies, the TiO2 films' characteristics occur to be highly dependent on the production parameters and initial materials utilized. Controlling the formation of TiO2 thin films with the sol-gel method was momentarily discussed here.

View