Juyana A. Wahab
Thumbnail Image
Preferred name
Juyana A. Wahab
Official Name
A. Wahab, Juyana
Alternative Name
A Wahab, Juyana
Wahab, Juyana A.
Wahab, J. A.
Main Affiliation
Scopus Author ID
36783614000
Researcher ID
AAY-8291-2021

Research Output

No data found

Filters

Show more
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    Effect of wetting characteristics of dimpled micro-textured substrate on the spreading area of Sn–0.7Cu solder alloy
    (Springer, 2023)
    Siti Faqihah Roduan
    ;
    Juyana A. Wahab
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Nurul Aida Husna Mohd Mahayuddin
    ;
    Aiman Mohd Halil
    ;
    Amira Qistina Syamimi Zaifuddin
    ;
    Mahadzir Muhammad Ishak
    This study aimed to investigate the effect of wetting characteristics of a dimpled micro-textured copper substrate on the spreading area of the Sn–0.7Cu solder alloy. A laser surface texturing (LST) technique was used to fabricate dimpled micro-textured on the copper substrate. Three samples were fabricated by varying the dimple spacing on the copper substrate such as 100, 140, and 180 µm. A 3D measuring laser microscope was used to study the surface roughness. The copper substrates’ water contact angle measurement and surface roughness were studied for their wetting characteristics. In order to study the effect of wetting characteristics of the dimpled micro-textured copper substrate, spreading area measurement was conducted. The result showed that dimpled micro-textured introduces higher surface roughness and contact angle, increasing the hydrophobicity. Consequently, this reduces the spreading area of Sn–0.7Cu solder alloy.
  • Publication
    Effectiveness of dimple microtextured copper substrate on performance of Sn-0.7Cu solder alloy
    ( 2022)
    Siti Faqihah Roduan
    ;
    Juyana A. Wahab
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Nurul Aida Husna Mohd Mahayuddin
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Aiman Bin Mohd Halil
    ;
    Amira Qistina Syamimi Zaifuddin
    ;
    Mahadzir Ishak Muhammad
    ;
    Andrei Victor Sandu
    ;
    Mădălina Simona Baltatu
    ;
    Petrica Vizureanu
    This paper elucidates the influence of dimple-microtextured copper substrate on the performance of Sn-0.7Cu solder alloy. A dimple with a diameter of 50 µm was produced by varying the dimple depth using different laser scanning repetitions, while the dimple spacing was fixed for each sample at 100 µm. The dimple-microtextured copper substrate was joined with Sn-0.7Cu solder alloy using the reflow soldering process. The solder joints’ wettability, microstructure, and growth of its intermetallic compound (IMC) layer were analysed to determine the influence of the dimple-microtextured copper substrate on the performance of the Sn-0.7Cu solder alloy. It was observed that increasing laser scan repetitions increased the dimples’ depth, resulting in higher surface roughness. In terms of soldering performance, it was seen that the solder joints’ average contact angle decreased with increasing dimple depth, while the average IMC thickness increased as the dimple depth increased. The copper element was more evenly distributed for the dimple-micro-textured copper substrate than its non-textured counterpart.
      25  5