Now showing 1 - 2 of 2
  • Publication
    1×4 Patch Array All-Textile Antenna for WLAN Applications
    This paper proposes the design of 1×4 patch array all-Textile antenna for Wireless Local Area Networks (WLAN) applications. The wearable antenna needs to have low profile and lightweight since such antenna is intended to operate in the vicinity of the human body. The key parameters are studied to determine their effects towards the performance of the antenna. The proposed design uses ShieldIt as the top radiator and ground plane, while fabric Felt is used as a substrate, sandwiched between the top radiator and ground plane.The obtained results show that there is improvement in the proposed array antenna in terms of gain enhancement and impedance bandwidth, maximum up to 143.6% and 19.08%, respectively, against single patch structure.
      4  33
  • Publication
    Bending Assessment of Dual-band Split Ring-shaped and Bar Slotted All-Textile Antenna for Off-body WBAN/WLAN and 5G Applications
    This paper presents a dual-band split ring-shaped and bar slotted textile antenna for potential WBAN/WLAN and 5G applications. The antenna is made using textiles and features a full ground plane to possibly alleviate coupling to the human body. The overall size of the antenna is 70 x 70 mm2, with a patch sized at 47.2 x 31 mm2 0.472 \lambda \times 0.031 \lambda. The antenna is made using ShieldIt Super as its conductive textile and felt as its substrate. To enable its dual-band resonance at 2.45 and 3.5 GHz a split ring-shaped and bar slots are integrated onto the patch. The proposed antenna is evaluated when bent under different radii and at different axes to estimate its performance in terms of reflection coefficient, bandwidth, efficiency and gain. A 10-dB impedance bandwidth of 57 % or 135 MHz (from 2.39 to 2.52 GHz) and 70 % or 240 MHz (from 3.45 to 3.56 GHz) are obtained when evaluated in the planar /bent configuration. The maximum realized gain is 6 dBi for at 3.5 GHz. These performances indicate that the antenna proposed in this work can be potentially improved for applications in WBAN/WLAN and 5G bands.
      3  22