Hasliza A Rahim @ Samsuddin
Thumbnail Image
Preferred name
Hasliza A Rahim @ Samsuddin
Official Name
A Rahim @ Samsuddin, Hasliza
Alternative Name
A. Rahim, Hasliza
Rahim, Hasliza A.
Rahim Samsuddin, H. A.
Rahim, Hasliza Abdul
Rahim, Hazliza A.
Rahim, H. A.
Rahim, H.
Hasliza,
Rahim H, Abd
RahimAtSamusuddin, Hasliza A.
A Rahim, Hasliza
Rahim At Samsuddin, Hasliza A.
ARahim, H.
Rahim Samsuddin, A. Hasliza
Rahim At Samsuddin, H. A.
Rahim, Hasliza Abd
Rahim, Hasliza
Rahim At Shamsuddin, H. A.
Main Affiliation
Scopus Author ID
57202496362
Researcher ID
ABE-3328-2020

Research Output

Filters

2
2
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    A dual band antenna design for future millimeter wave wireless communication at 24.25 GHz and 38 GHz
    ( 2017-10-10)
    Daud N.N.
    ;
    Muzammil Jusoh
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Rozmie Razif Othman
    ;
    Sapabathy T.
    ;
    Mohd Nizam Osman
    ;
    Yassin M.N.M.
    ;
    Kamarudin M.R.
    This paper proposes a dual band antenna for future millimeter wave wireless communication. The performance of this dual band antenna is analyzed in term of reflection coefficient when some of the length of the patch antenna was adjustable, overall gain and total efficiency for both frequencies respectively. The size of this presented patch antenna is 4.9 × 7.6 mm2. The dual band antenna was fabricated on a RTRogers5880 with a dielectric constant of £=2.2 and thickness of the substrate is 0.127 mm. The simulated result obtained the reflection coefficient as a requirement of the antenna which is not less than -10 dB for 24.25 GHz and 38 GHz that capable to cover 5G applications. The proposed antenna has achieved a maximum gain up to 5.5 dBi and 4.5 dBi at desired frequencies respectively. All design and simulation are carried out using CST Microwave Studio software. The proposed antenna design could be suitable to be applied as a device to the 5G wireless system.
  • Publication
    Bending Assessment of Dual-band Split Ring-shaped and Bar Slotted All-Textile Antenna for Off-body WBAN/WLAN and 5G Applications
    ( 2020-09-28)
    Mashaghba Hamza A.
    ;
    Hasliza A Rahim @ Samsuddin
    ;
    Soh Ping Jack
    ;
    Abdulmalek M.
    ;
    Ismahayati Adam
    ;
    Muzammil Jusoh
    ;
    Thennarasan Sabapathy
    ;
    Mohd Najib Mohd Yasin
    ;
    Khairul Najmy Abdul Rani
    This paper presents a dual-band split ring-shaped and bar slotted textile antenna for potential WBAN/WLAN and 5G applications. The antenna is made using textiles and features a full ground plane to possibly alleviate coupling to the human body. The overall size of the antenna is 70 x 70 mm2, with a patch sized at 47.2 x 31 mm2 0.472 \lambda \times 0.031 \lambda. The antenna is made using ShieldIt Super as its conductive textile and felt as its substrate. To enable its dual-band resonance at 2.45 and 3.5 GHz a split ring-shaped and bar slots are integrated onto the patch. The proposed antenna is evaluated when bent under different radii and at different axes to estimate its performance in terms of reflection coefficient, bandwidth, efficiency and gain. A 10-dB impedance bandwidth of 57 % or 135 MHz (from 2.39 to 2.52 GHz) and 70 % or 240 MHz (from 3.45 to 3.56 GHz) are obtained when evaluated in the planar /bent configuration. The maximum realized gain is 6 dBi for at 3.5 GHz. These performances indicate that the antenna proposed in this work can be potentially improved for applications in WBAN/WLAN and 5G bands.
      3  22