Hakimah Osman
Thumbnail Image
Preferred name
Hakimah Osman
Official Name
Hakimah, Osman
Alternative Name
Osman, Hakimah
Osman, H.
Main Affiliation
Scopus Author ID
7005733143
Researcher ID
AAT-9920-2020

Research Output

Filters

2
1
1 1
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    Recycled polyethylene terephthalate blends and composites: Impact of pet waste, engineering design, and their applications
    ( 2023-09-23)
    Zunaida Zakaria
    ;
    Hakimah Osman
    ;
    Nor Azura Abdul Rahim
    ;
    Munusamy Y.
    ;
    Ismail H.
    Polyethylene terephthalate (PET) is one of the major polymers produced and has been widely used in downstream industries, such as the production of textile fibers, packaging bottles, and films. The increased use of PET is associated with its excellent properties, which include thermal resistance, lightweight, high transparency, good impact, and relatively low cost. This indirectly contributes to a large amount of PET solid waste, which is detrimental to human life and exacerbates environmental issues. As a result, conversion to new PET blends and composites is an efficient method to recycle PET and reduce waste. While research in this area is ongoing and improving with the development of new materials for various applications, its commercialization has yet to begin. This chapter focuses on the designation of recycled PET and its performance as new blends and composites. Among the other topics discussed are PET waste sources, recycling methods, and applications, as well as the challenges of recycling PET and converting this solid waste into value-added products. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2023.
      1
  • Publication
    Evaluation and Enhancement of Polylactic Acid Biodegradability in Soil by Blending with Chitosan
    ( 2023-06-01)
    Nor Helya Iman Kamaludin
    ;
    Ismail H.
    ;
    Rusli A.
    ;
    Sam Sung Ting
    ;
    Hakimah Osman
    This study highlights the soil burial degradation of polylactic acid/chitosan (PLA/Cs) biocomposites prepared by the melt compounding technique. The effect of various Cs loadings (2.5, 5, 7.5, 10 parts per hundred parts of polymer (php)) and soil burial periods (0, 2, 6, 12 months) on visual observation, weight loss, changes in functional groups, as well as tensile, thermal, and morphological properties were analyzed. The PLA/Cs biocomposites became brittle and showed more fragmentation with increasing Cs content and buried time. The result correlates with a remarkable increase in weight loss percentage of about ~ 192%, with Cs addition from 2.5 to 10 php at the end of soil degradation. Besides, a decrement in peak intensity at 1751 cm−1 and 1087 − 1027 cm−1 after 12 months signifies the breakdown of PLA ester bonds due to the hydrolytic degradation. This correlates to a significant drop of 60% and 55% in tensile strength and elongation at break, respectively, in the 2.5 php sample, whilst further Cs addition resulted in the broken of the biocomposites at the end of the soil degradation. Yet, no significant difference was observed in the tensile modulus. A consistent stiffness in the biocomposite suggests the degradation occurs in the amorphous region and leaves the crystalline part. This is proven by the 70% increment in crystallinity degree in all samples after 12 months of soil burial. Moreover, surface morphology showed numerous and extended crack formations. It proposes a notable deterioration effect of the biocomposite due to biodegradation. The hydrophilicity of Cs enhances water-polymer interaction, thereby accelerating the biodegradation of polymer components. Therefore, Cs could be a good candidate for facilitating PLA biodegradation in the natural soil environment.
      1  27