Ahmad Faizal Mansor
Thumbnail Image
Preferred name
Ahmad Faizal Mansor
Official Name
Ahmad Faizal, Mansor
Alternative Name
Mansor, Ahmad Faizal
Mansor, A. F.
Mansor, A. Faizal
Main Affiliation
Scopus Author ID
57186430100
Researcher ID
IMX-6574-2023

Research Output

Filters

4
2
4
Reset filters

Settings
Now showing 1 - 4 of 4
Thumbnail Image
Publication

Effect of natural fibers on the soil compaction characteristics

2020-06-10 , Nor Faizah Bawadi , Ahmad N.S. , Ahmad Faizal Mansor , Shamilah Anudai @ Anuar , Mohd Asri Ab Rahim

Clay soils are considered as a problematic soil in term of water absorption rate. The ideas of soil improvement method had been widely used to modify the physical and mechanical properties of clay soil. This study aims to identify the optimum percentage mixing of natural fibers in influencing the compaction characteristics. X - ray fluorescent test (X-RF) and Standard Proctor test has been performed to determine the chemical composition of natural fibers and compaction characteristics of soil samples. Natural fibers such as banana, kenaf, and coconut coir were used as a natural soil stabilizer with varying percentage mixing to increase the properties and stability of soil samples. Experimental data obtained from compaction test shows that the appropriate maximum dry density and optimum moisture content for each natural fiber are at 0.5% natural fibers mixing. In this study, the maximum dry density and optimum moisture content for untreated samples are 1650kg/m3 and 7.8%, respectively. Meanwhile, for treated soil samples that mixed with banana, coconut and kenaf fibers are 1760kg/m3, 1780kg/m3, 1670kg/m3 and 8.2%, 8%, 11%, respectively. Hence, 0.5% mixing with banana fibers indicated the best possible amount of dry density and moisture content among other natural fibers. Therefore, this study proved that natural fibers can act as a good natural soil stabilizer in increasing stability of clay soil.

View
Thumbnail Image
Publication

Use of Palm Kernel Shell from Agriculture Waste as Partial Replacement for Coarse Aggregate in Hot Mix Asphalt

2024-04-19 , Liyana Ahmad Sofri , Muhammad Faiz Zainal , Muhammad Munsif Ahmad , Khairunnisa Muhamad , Ahmad Faizal Mansor

Palm kernel shell (PKS) is known as a waste material that produced by oil palm factory. In this research, PKS will be used as an alternative to improve the strength and performance of hot mix asphalt (HMA). The bitumen grade of 60/70 PEN and ACW14 had been used in the research. To investigate the strength of PKS in term of designing wearing course, bitumen content of 4% to 6% and different mix design with different percentages content of PKS were provided. The total specimens prepared in this research are 45 specimens. The specific gravity of PKS was lower and showed the high capacity in water absorption compare to the natural aggregate. The increment of percentage for PKS in HMA make the strength in Marshall Specimen became decreases as stated in the result and discussion. Result of optimum bitumen content for PKS 10, PKS 30 and PKS 50 were 4.72%, 4.86% and 4.90% individually. All optimum bitumen content in this research was satisfied with JKR Standard 2008 in term of the design parameter. The specimen of PKS 10, PKS 30 was classified as heavy traffic and PKS 50 was classified as medium traffic. PKS 10 was shown as a good partial replacement for natural aggregate due to the admissibility of parameter, environmental friendly factor and cheapest in costing.

View
Thumbnail Image
Publication

Influence of Banana Fiber on Shear Strength of Clay Soil

2020-07-09 , Nor Faizah Bawadi , Alhamidi M.A.A. , Ahmad Faizal Mansor , Shamilah Anudai @ Anuar

Recently, the agricultural waste have been enticed increasing attention in geotechnical engineering as a natural soil reinforcement in improving strength and stability of soils. Agricultural waste fiber was chosen as it is cheap, locally available, bio-degradable and eco-friendly. In this study, the implementation of banana fibers has been used as a natural soil reinforcement in influencing the strength of clay soil. In order to investigate the influence of banana fiber in strengthen the clay soil, three different percentage mixing of banana fiber in clay soil has been tested using Unconsolidated Undrained Triaxial and California Ratio Bearing (CBR) tests. The results of X-Ray Fluorescense (X-RF) indicated that average 45% of chemical compositions inside the banana fibers are calcium hydroxide which resulting the pozzolanic reactions and lead to the modification of soil properties and improve the strength of soil. This research is important in order to find the suitability of banana fiber as admixture in soil stabilization. Banana fiber as admixture in soil stabilization will contribute to conservation of the environment. The results from the tests conducted have shown that the soil treated with 1% fibre content improved termendously in term of shear strength compared to untreated sample. However, based on the regression analysis, 0.5% mixing of banana content indicate the optimum percentage mixing of banana fiber in clay soil.

View
Thumbnail Image
Publication

The ProPerTies of Ground GranulaTed BlasT furnace slaG liGhTweiGhT aGGreGaTe (Gla) aT Various Molar raTio and iTs aPPlicaTion in concreTe

2023-01-01 , Rafiza Abd Razak , Hassan M.A. , Mohd. Mustafa Al Bakri Abdullah , Zarina Yahya , Ariffin M.A.M. , Ahmad Faizal Mansor , Hao D.L.C.

The effects of supplementary cementitious materials (SCM) on the characteristics and internal structure of synthetic aggregate made from ground granulated blast furnace slag are investigated in this study (GGBS). Due to its high pozzolanic activity, GGBS was shown to be superior to other SCM materials, enhancing both the strength and durability of synthetic aggregate. Because sintering uses a lot of energy and generates a lot of pollutants, using a cold-bonded approach to make low density lightweight aggregates is particularly significant from an economic and environmental standpoint. Thus, the utilisation of ground granulated blast furnace slag (GGBS) as a substitute material in the production of green artificial lightweight aggregate (GLA) using the cold bonding method was discussed in this work. Admixtures of ADVA Cast 203 and Hydrogen Peroxide were utilised to improve the quality of GLA at various molar ratios. The freshly extracted GLA was then evaluated for specific gravity, water absorption, aggregate impact, and aggregate crushing in order to determine the optimal proportion blend. As a result, the overall findings offer great application potential in the development of concrete (GCLA). It has been determined that aggregates with a toughness of 14.6% and a hardness of 15.9% are robust. The compressive strength test found that the GCLA has a high strength lightweight concrete of 37.19 MPa and a density of 1845.74 kg/m3. The porous features developed inside the internal structure of GLA have led to GCLA’s less weight compared to conventional concrete.

View