Amarul Talip
Thumbnail Image
Preferred name
Amarul Talip
Official Name
Amarul, Talip
Alternative Name
Amarul, T.
Amarul, T.
Talip, Amarul
Main Affiliation
Scopus Author ID
57204806258

Research Output

Filters

5
5
3 2
Reset filters

Settings
Now showing 1 - 5 of 5
Thumbnail Image
Publication

Portable Water Cooler with Water Heater Using Thermoelectric and Arduino Uno and Powered Using Power Bank

2020-07-09 , Fadzly M.K. , Aqilah S.N. , Farizuan , Amarul Talip , Irfan Abd Rahim

The purpose of this study is to use water cooler and water heater to improve the convenience of the user so that they can use the water cooler and mobile water heater properly and comfortably. This study focuses on how refrigeration and water heaters use thermoelectric pads as a cooling and heating medium. Peltier works when the voltage is flowing from the power bank. The temperature difference on the surface of the processor allows the heat to occur at a fast rate. Arduino uno is used as a voltage regulator and temperature sensor to improve product performance. concept designs are designed, created and evaluated. The final prototype will include some markers that will be used as temperature readings by cooling and heating. Based on the results shown, the prototype can achieve the desired result with optimized energy consumption. When the temperature supplier produces a good temperature, the amount of water temperature will rise and the heat in the water will reach thermal equilibrium until the cold and hot temperatures reach a better minimum. Therefore, the temperatures in the cold and hot areas are more efficient in achieving thermal equilibrium in rising water.

View
No Thumbnail Available
Publication

Design and Development of Pneumatic Air Engine using Linear Actuator

2020-07-09 , Fadzly M , Maizaty R. , Irfan Abd Rahim , Muhamad Farizuan Rosli , Amarul Talip

A study was performed to produce a pneumatic air engine using two linear actuators and then the linear motion was converted to a rotating motion using a crank shaft. This study aims to increase the use of linear actuators in pneumatic air engines as well as to apply pressurized air as an efficient and convenient transportation mechanism in line with the development of technologies developed through products available in the market. Two units of linear actuator such as pneumatic cylinders with two units of 5/2 way directional control valve with double solenoid actuation are used to control the cylinder movement. The cylinder will rotate the crank shaft when receiving a signal from the solenoid valve with 5 bar air pressure. In conclusion, the system can travel up to 153 meters for a 24-liter air-pressure with 5 bar pressure when the test is run for a charging cycle by the compressor motor. If the compressor motor able to charge the compressor continuously, the movement distance can be increased.

View
Thumbnail Image
Publication

Elektronik asas : untuk pelajar mekanikal

2015 , Amarul Talip , Mohd Sazli Saad , Mohd Fathullah Ghazli@Ghazali , Nur Ismalina Haris

Buku ini mengandungi lapan (8) bab kesemuanya di mana ia telah disusun dan mencakupi bab-bab asas yang penting untuk membentuk satu ilmu asas Teknologi Elektrik yang lengkap untuk para pelajar Kejuruteraan Mekanikal. Antara bab-bab tersebut ialah, Asas Kejuruteraan Elektrik, Litar Arus Terus, Litar Arus Ulang-alik, Sistem Tiga Fasa, Elektromagnetik, Pengubah, Mesin Arus Terus dan Mesin Pearuh Tiga Fasa. Di samping itu, buku ini juga diharapkan dapat menjadi rujukan para pelajar dari politeknik khasnya dan institusi pengajian tinggi amnya kerana bilangan buku-buku rujukan yang terdapat dalam Bahasa Melayu adalah terhad. Dalam usaha untuk menambah bilangan buku-buku rujukan yang ditulis dalam Bahasa Melayu, penghasilan buku ini diharapkan dapat membantu pelajar Kejuruteraan khususnya Kejuruteraan Mekanikal untuk lebih memahami dan menguasai Asas Teknologi Elektrik.

View
No Thumbnail Available
Publication

Smart Air Quality Monitoring System Using Arduino Mega

2020-07-09 , Fadzly M.K. , Yiling , Muhamad Farizuan Rosli , Amarul Talip , Mohd Effendi Muhammad Suandi

Traditionally, pollution measurements are performed using expensive equipment at fixed locations or dedicated mobile equipment laboratories. The automatic air quality monitoring system using Arduino can save cost and easy to access. The project that we have undertaken has helped us gain a better perspective on various aspects related to our course of study as well as practical knowledge of electronic equipment and communication. Moreover, the project of air quality monitoring system has achieved to monitor and prevent the effect of high temperature and dusty air to the child and human just like the objective of the project needed. The project can detect the temperature and dust density and besides that it will send alert to the user when detecting the air quality is unhealthy. Furthermore, a project is design and develop air quality monitoring system using Arduino Mega which is to enhance safety affect such that even the minor eye irritation can make the user to lose his concentration and lead to serious accidents. Where the dust sensor and temperature able to detect hazy day that triggers buzzer to alert user to decrease the outdoor activities. Air quality is monitor for whole day at Ulu Pauh Putra by using this device and the data is recorded and make into a graph. The average dust density is 78.22ug/m3 and the range of dust density levels are about 68.07ug/m3 to 84.87ug/m3. By comparing the result to API reading show that air quality is moderate pollution that does not pose any bad effect on health. The testing of project was done for whole day is to verify the accuracy of the data. Moreover, it can help to avoid errors occur in the project. Focusing on the device produced, it detects high temperature and sense the dusty air immediately. Once the sensitivity is high, the buzzer module will active to alert user.

View
Thumbnail Image
Publication

Asas teknologi elektrik : untuk pelajar mekanikal

2015 , Amarul Talip , Mohd Sazli Saad , Irfan Abdul Rahim , Mohd Fathullah Ghazli@Ghazali , Mohd Khairul Fadzly Abu Bakar , Nur Ismalina Haris

Buku ini mengandungi lapan (8) bab kesemuanya di mana ia telah disusun dan mencakupi bab-bab asas yang penting untuk membentuk satu ilmu asas Teknologi Elektrik yang lengkap untuk para pelajar Kejuruteraan Mekanikal. Antara bab-bab tersebut ialah, Asas Kejuruteraan Elektrik, Litar Arus Terus, Litar Arus Ulang-alik, Sistem Tiga Fasa, Elektromagnetik, Pengubah, Mesin Arus Terus dan Mesin Pearuh Tiga Fasa. Di samping itu, buku ini juga diharapkan dapat menjadi rujukan para pelajar dari politeknik khasnya dan institusi pengajian tinggi amnya kerana bilangan buku-buku rujukan yang terdapat dalam Bahasa Melayu adalah terhad. Dalam usaha untuk menambah bilangan buku-buku rujukan yang ditulis dalam Bahasa Melayu, penghasilan buku ini diharapkan dapat membantu pelajar Kejuruteraan khususnya Kejuruteraan Mekanikal untuk lebih memahami dan menguasai Asas Teknologi Elektrik.

View