Norsyakilah Romeli
Thumbnail Image
Preferred name
Norsyakilah Romeli
Official Name
Norsyakilah, Romeli
Alternative Name
Romeli, N.
Main Affiliation
Scopus Author ID
57202285970
Researcher ID
GYJ-4157-2022

Research Output

Filters

7 1
Reset filters

Settings
Now showing 1 - 7 of 7
No Thumbnail Available
Publication

Cost control mechanism as procurement selection decision matrix for Malaysian infrastructure projects

2020 , Norsyakilah Romeli , F Muhamad Halil , F Ismail , M S Hasim

Malaysia was enumerated as the realm that retains a high quality of infrastructure facilities among the other ASEAN countries, and the number of infrastructure projects is progressively developed to offers a virtuous cordiality to the citizen. Inevitably, the infrastructure projects are barely devoted to the complex project selection decision phase where the procurement represents the suave configuration of the projects. However due to the difficulty in analyzing an assorted variety of procurement system afford by inexperienced decision maker the procurement route often unkempt the cost related dynamic. Regularly, the decision based on narrow consideration of cost and project quality overestimated in within a short period of construction. Even worst, there is partially public discourse on the cost control elements towards the disputable project procurement selection, which reflects the lesson learnt on the previous infrastructure project has mismanaged to provide a municipal cost precaution. Prior to that, the research objective is to identify the relationship in between the cost control mechanism and project procurement selection decision in infrastructure projects. The adoption of quantitative method and analysis applies in this research among the infrastructure expert settings. The output from the methods disclose that the cost control acquires a strong correlation in the project procurement selection decision equation with project risk, capital resources, alliance requirement based, changes of policy, fluctuation of inflation rates, labor cost, material cost, robust feasibility studies as a driver to an efficacious project procurement assortment verdict.

View
Thumbnail Image
Publication

Heritage building design properties: Development of as built drawing by uav application via 3d laser scanner

2020-01-01 , Hazry Desa , Muhammad Azizi Azizan , Nik Noriman Zulkepli , Norsyakilah Romeli

Inadequate information that represent the existing figure of the building after transmission of years and the eagerness of the Malaysian’s architect to develop frantically modern development design that gradually neglecting the essence of cultural perseverance of the heritage building has been brawled excessively. Taking a human – factor constraint to conducted the physical survey, the technologies such as computers and digital media have given beneficial value that are time saving and less risky. Hence, the research aim for the development of the as-built drawing for Masjid Alwi, Kangar, Perlis has been completed via UAV application and 3D laser scanner, and results were recorded on the structural and architectural properties of Masjid Alwi that has been analyzed accordingly. Therefore, the needs of having an adequate as-built drawing due to the depletion of the ancient documentation and as a baseline for the designer maintaining the cultural identity in a way to design new development is imperative and possible with the aid of UAV application and 3D scanning.

View
Thumbnail Image
Publication

Building Information Modelling (BIM) as an UAV Information Processor for Generating an 'As Built Drawing'

2020-11-24 , Norsyakilah Romeli , Hazry Desa , Muhammad Azizi Azizan

The heritage building is a valuable asset to humans and countries due to the grandeur symbolization and the dignity representation of a country. However, the dramatic changes on the historical building physical feature has been documented poorly. Subsequently, the depletion of the building information has making the maintenance works intricate. On site surveying might difficult due to the safety issue that putting manpower into risky circumstances. Advance technology may allow many to obtain information using aid of remote sensing, photogrammetry, geographic information system (GIS) and 3D laser scanning. The projection of the As Built Drawing might possible without utilisation of BIM as an analyser for the raw information congregated. Thus, the objective of this research is to develop an 'As Built Drawing' for heritage building using Building Information Modelling (BIM) as an information processor. The methodology involved the Unmanned Aerial Vehicle (UAV) application and Terrestrial Laser Scanner, photogrammetry image then been analysed using BIM. The identification of design properties of heritage building was obtained which consisted of architectural properties and structural properties. Therefore, the development of 'As Built Drawing' will be produced completely using BIM and in the other hand solving the problem on facilities management on the historical building.

View
Thumbnail Image
Publication

Heritage building modelling: Photogrammetry challenges in producing an as built drawing (ABD) Using Unmanned Aerial System (UAS)

2021-03-01 , Hazry Desa , Muhammad Azizi Azizan , Nik Noriman Zulkepli , Norsyakilah Romeli

Tracking the heritage building changes has been a primary concern in an architectural works, as the building features may transformed due to periodic of time. In addition, the perseverance of heritage buildings seems taken lightly due to the eagerness of the Malaysian architect in designing urban anxious architectural features for the new building development. Therefore, in order to preserve the delicate features in heritage building; the development of an 'As Built Drawing' (ABD) is crucial. Plotting the ABD has several laidback which includes the reachability of the human to measure the building on site. Hence, technology acceleration using Unmanned Aerial System (UAS) has provided an instrument to develop ABD without risking human's lives. Prior to development of ABD, there are several challenges in the implementation, specifically on the photogrammetry area. The photogrammetry phase in this research is crucial, as the ambiguous imaging captured can caused the misrepresentative Building Modelling replication. Therefore, the research aims to identify the imaging challenges during the progression of producing the ABD using UAS technology. With aid of the 3D Laser Scanner, the instrumental parameters have been set up, and data were recorded. On field data were collected in heritage building in Masjid Alwi Kangar. The ABD has been produced and the challenges arose from the implementation were bountiful to discuss. The research found that, the imaging challenges were the imperative parameters to tackle in order to score the accuracy in producing ABD using UAS technology.

View
Thumbnail Image
Publication

Building Information System (BIM) as Analyzing Tool Measuring Railway Project Progression

2023-10-04 , Norsyakilah Romeli , Nurfadzillah Ishak , Nur Soleha Abdul Rahim , Amin R.M. , Aizat Afiq A.G.M.

The diversities of contractual terms in construction projects leads to a diversified contractual interpretation in one project. In the long term, the contractual discrepancies would resulted the project suffered from the unwavering disputes. Given the circumstances of site valuation, which refers to the evaluation on the quantity of the building feature was hardly to be quantified in the exact amount based on contractor’s work done. Often, the site evaluation dissatisfactions occurred when the quantity elements in the railway construction has been over claimed by the contractor due to accuracy onsite inspection. The mega structure construction projects have the complicated site inspection and real time measuring tabulation. As fatality increase on site, due to risking human life on the field. The safety culture in mega structure construction has been considered taken lightly. Recently, the advance technology has offered new whole idea in implementing site measurement without risking man, which is using the application of technology that enable Building Information Modelling (BIM) as analyzing tool to process as built drawing. Thus, this research aims to identify the effectiveness utilization of Building Information Modelling (BIM) in measuring real time in railway construction industry.

View
Thumbnail Image
Publication

Analysis on the Relationship Between Safety Culture and Complexity Factors in Marine Construction Safety Performances

2023-10-04 , Nurfadzillah Ishak , Muhammad Azizi Azizan , Norsyakilah Romeli , Rahim N.S.A. , Fazdliel Aswad Ibrahim , Rashid N.F.A.

Safety is vital in reducing the possibilities of an accident and by increasing the safety measures in the workplace it may lead to the performance of the project. To improve the safety measures especially in marine construction project, the influence factors that contribute to safety culture factor must be studied and analyzed. However, the complexity factor that occurs during the implementation is important to be considered. Therefore, the objective of this research is to discover the relationship between safety culture and complexity factors towards marine construction safety performance. The correlation analysis was performed using Pearson’s Correlation Coefficient to measure the strength of relationship between the influenced factors. The results show that all the factors have strong linear correlation and the findings are beneficial to be used as framework to practical parties to improve their safety culture performances specifically in marine construction.

View
Thumbnail Image
Publication

Identifying Real Estate Buyer's Feedback on Three-Dimensional Mock-Up Model Among House Buyers in Malaysia

2024-04-19 , Fazdliel Aswad Ibrahim , Hang Y.H. , Shafiei M.W.M. , Rafiza Abd Razak , Nur Soleha Abdul Rahim , Norsyakilah Romeli

Marketing communications are intended to convey messages or information to target users. In today's competitive business environment, products and services companies need to make sure that the communications they use are effective as consumers are made up of many features that have different perspectives and feedback. However, there is almost no specific study in this regard that focuses on the housing sector. Therefore, the aim of this research is to study the real estate buyers' response towards the marketing communications process and the marketing communication channels which are used in the housing industry in marketing the real estate property. A set of survey questions will be used in conjunction with a three-dimensional mock-up housing model in collecting the response from the real estate buyers in Malaysia. The data collection will be conducted through social media platforms where the convenience of non-probability sampling method is used in this study to obtain the real estate buyer's feedback. This study uses a quantitative method of survey to collect the data. The study data will be analysed using SPSS (Statistical package for the social sciences) software. The expectation of this study is to support the research literature on marketing communications in general as well as the real estate sector, in addition to provide guidance for real estate developers to improve their marketing communications, thus protecting the social interests of home buyers.

View