Biomass pellets are one of the most crucial feedstocks for bioenergy production on a global scale due to their numerous advantages over raw biomass resources. Pellets provide improved energy density, bulk density, moisture content, and homogeneity thereby reducing storage, handling, and transportation costs. To produce high-quality solid fuel, it is necessary to comprehend the properties of wood fuel. This study explored the potential of Khaya senegalensis (khaya) as a dedicated energy crop (DEC) for the production of green energy. It thrives in less-than-ideal conditions and grows rapidly. The low durability of energy pellets raises the risk of dust and fire during handling and storage. In addition, the potential for fines and dust formation is strongly correlated with the mechanical strength of materials. Due to this necessity, the current study examines the effects of pelletization factors, including temperature and pressure, on pellet properties, particularly on its mechanical properties. The durability and compressive strength of pellets were determined using a sieve shaker and a universal testing machine, respectively. The highest mechanical durability was observed at 3 tons of pressure and 75 degrees Celsius, each with a value of 99.6%. The maximum axial compressive strength was measured at 57.53 MPa under 5 tons of pressure. When pelletized at 125 °C, the axial compressive strength increased by 13.8037% to 66.06 MPa compared to the strength obtained at 5 tons of pressure. Pelletizing Khaya feedstocks at 4 tons of pressure, on the other hand, produced a slightly lower diametral compressive strength of 7.08 MPa compared to 7.59 MPa at 125 °C. The experimental results revealed that the aforementioned factors significantly affect the mechanical properties of pellets. The elucidation of wood biomass, solid fuel qualities and pelletization parameters of this potential energy crop may facilitate the production of high-quality pellets from Khaya senegalensis wood to meet the increasing local and worldwide energy demands.
