In this research, the effect of different sodium hydroxide (NaOH) concentration (3, 6 and 9 wt.%) on the tensile properties of linear low density polyethylene / date seeds (LLDPE/DS) composites were investigated. The size of DS particles was measured at (125 - 250 μm) and the ratio of LLDPE over DS was fixed at 90/10 wt.%. The samples were prepared using extrusion process (screw speed at 60 rpm and barrel and die temperature at 160°C and 165°C respectively) followed by injection moulding process (from feed to exit die zone temperature at 160, 165, 170 and 175°C respectively). Results suggest that the addition of NaOH particularly 3 wt% has improved the tensile strength. Additionally, the elongation at break has improved as well. However, the high concentration of NaOH, particularly 9 wt.% effects negatively on these properties. In contrast, the Modulus shows different trend, which increased as NaOH concentration increased in the composites. The SEM section shows the improvement on DS surface as low NaOH concentration used (3 wt.%) and deterioration on the DS surface as high NaOH concentration used (9 wt.%).
