Zaliman Sauli
Thumbnail Image
Preferred name
Zaliman Sauli
Official Name
Zaliman, Sauli
Alternative Name
Sauli, Zaliman B.
Sauli, Zaliman
Sauli, Z.
Main Affiliation
Scopus Author ID
24554644300
Researcher ID
FWC-2779-2022

Research Output

Filters

1
2
Reset filters

Settings
Now showing 1 - 2 of 2
Thumbnail Image
Publication

Effects of pH and concentration on the capability of E. coli and S. epidermidis with bentonite clay as biosorbent for the removal of Copper, Nickel and Lead from polluted water

2017 , Delia B. Senoro , Josel B. Godezano , Meng-Wei Wan , Lemmuel L. Tayo , Zaliman Sauli , Hasnizah Aris , Mohamad Halim Abd. Wahid

This paper discusses the effects of pH and concentration on the capability of E. coli ATCC29522 and S. epidermidis RP62A biofilm with bentonite in removing divalent copper, nickel and lead from wastewater. Batch adsorption study at laboratory scale was utilized to evaluate the potential use of bacterial biomass (E. coli ATCC29522 and S. epidermidis RP62A) aided with geosynthetic clay (bentonite) for the removal of Cu2+, Ni2+and Pb2+. Results revealed that removal of Cu2+, Ni2+and Pb2+ by both types of organisms supported with bentonite were high in the first 4 hours of the experiment. This illustrates that the binding site on that particular time was abundant. Hence, the removal rate was evident at high concentration depicting the line adsorption equilibrium. It also revealed that S. epidermidis RP62A supported with bentonite had the highest affinity to Copper and Lead with Qm = 277.7 mg/g and 5.0075 mg/g, respectively. While E. coli ATCC 29522 had the highest affinity to Nickel (Qm= 58.82 mg/g). Hence, the sorption of Cu2+, Ni2+and Pb2+ onto E. coli ATCC29522 and S. epidermidis RP62A biofilm supported with bentonite clay occurred through monolayer chemisorption on the homogeneous surface of E. coli ATCC29522 and S. epidermidis RP62A biofilm with bentonite clay. Batch kinetics studies revealed that the sorption of Cu2+, Ni2+and Pb2+ onto E. coli ATCC29522 and S. epidermidis RP62A biofilm supported with bentonite clay was well described by a pseudo-second-order equation model of type 1 (R2 = 0.9999), which implies that chemisorption is the rate limiting step.

View
Thumbnail Image
Publication

Effects of pH and concentration on the capability of E. coli and S. epidermidis with bentonite clay as biosorbent for the removal of Copper, Nickel and Lead from polluted water

2017 , Delia B. Senoro , Josel B. Godezano , Meng-Wei Wan , Lemmuel L. Tayo , Zaliman Sauli , Hasnizah Aris

This paper discusses the effects of pH and concentration on the capability of E. coli ATCC29522 and S. epidermidis RP62A biofilm with bentonite in removing divalent copper, nickel and lead from wastewater. Batch adsorption study at laboratory scale was utilized to evaluate the potential use of bacterial biomass (E. coli ATCC29522 and S. epidermidis RP62A) aided with geosynthetic clay (bentonite) for the removal of Cu2+, Ni2+and Pb2+. Results revealed that removal of Cu2+, Ni2+and Pb2+ by both types of organisms supported with bentonite were high in the first 4 hours of the experiment. This illustrates that the binding site on that particular time was abundant. Hence, the removal rate was evident at high concentration depicting the line adsorption equilibrium. It also revealed that S. epidermidis RP62A supported with bentonite had the highest affinity to Copper and Lead with Qm = 277.7 mg/g and 5.0075 mg/g, respectively. While E. coli ATCC 29522 had the highest affinity to Nickel (Qm= 58.82 mg/g). Hence, the sorption of Cu2+, Ni2+and Pb2+ onto E. coli ATCC29522 and S. epidermidis RP62A biofilm supported with bentonite clay occurred through monolayer chemisorption on the homogeneous surface of E. coli ATCC29522 and S. epidermidis RP62A biofilm with bentonite clay. Batch kinetics studies revealed that the sorption of Cu2+, Ni2+and Pb2+ onto E. coli ATCC29522 and S. epidermidis RP62A biofilm supported with bentonite clay was well described by a pseudo-second-order equation model of type 1 (R2 = 0.9999), which implies that chemisorption is the rate limiting step.

View